Used Biesse Skill 1536 G Ft for sale (326)

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Guedpfxsugpwns Afieh Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, machine/vehicle number: 006163, Max. panel width: 3200 mm No of Bottom Units: 3 No of injectors: 6 Gujdpfjiwpt Ujx Afieh

Year of construction: 1999, condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Brushes SP700 Edge Sanding unit LV 700 heated infeed guide PLC control panel support guide Large diameter roll holder edge cutting device for 3mm thick rolled edges Guodpjgtx Aqofx Afieh 400 V , 50 Hz CE- marked Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm 2900 Kg Technical information under subject of correction

Condition: used, functionality: unexamined, Ferwood Code: AGG0062 – Manufacturer Code: 6314A0111 – Condition: Used – Functionality: Not tested – Compatible Machine: CNC BIESSE ROVER 23/24/27/30/346 – If interested, we offer an overhaul service, please contact us. Weight and dimensions for transport: 2.5 kg, 20x20x20 cm Gjdpfx Aovu Auujfiouh

Condition: excellent (used), Numerical Control Type NC 400 Deluxe Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 1 Splindles for each horizontal drilling head (N°) 20 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 3 Transport belts to evacute chips (wastes) (N°) 2 Total installed power (Kw) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops Gedpfx Aform Ik Toieuh The CNC controls the movement (X axe) of the conveyor belts

Condition: ready for operation (used), Year of construction: 2015, This Biesse Akron 1440 was manufactured in 2015. It features a touchscreen control, joint milling, and a gluing unit with two Teflon-coated glue pans. It handles edges in rolls and stripes from 0.4 to 12 mm. Additional features include a snipping unit, pre-milling, rounding, and both profile and surface scraper blades. Consider the opportunity to buy this Biesse Akron 1440 edgebander. Contact us for more information about this machine. Application Types Edge Banding Guedpew Sazdsfx Afish

Condition: used, Numerical Control with BSolid Software - BSuite3 Working range in X axis mm 2500 Working range in Y axis mm 900 Working range in Z axis mm 60 With automatic unloading device N° 1 vertical electrospindle 3 axes, with automatic tool change, cones type Iso 30 Tool changer with 8 positions Drilling head with N° 17 spindles arranged as follows: - N° 6 vertical in X axis - N° 5 vertical in Y axis - N° 4 horizontal in X axis - N° 2 horizontal in Y axis Integrated blade for making grooves Front protection and safety system with mats Perimeter protection grids TECHNICAL DETAILS TO BE VERIFIED Guodpow Db H Hefx Afish

Condition: good (used), Year of construction: 2008, Biesse STREAN B1/8.0 Single-Sided Edgebander, Year 2008 - Code 0000015: Y-axis CNC with infeed guide - Code 0000011: Right-angle panel inserter - Code 0000517: Automatic lubrication C1 - Code 0000017: Parallelogram workpiece support 5.5–8.5 - Code 0000439: B1 installation kit with panel return device - Code 0000136: Liquid jet application unit - Code 0000669: RT20 pre-milling unit, 2×3.5 kW, 9000 rpm - Code 0000336: Additional pair of diamond cutters, H=60 - Code 0000469: SP20 glue spreading unit - Edge thickness: 0.3–3 mm - Bswyjukh Tqjhhpkswt (term seems corrupted, clarification needed) - Wood thickness: 20 mm - Panel thickness: 10–60 mm - Code 0000244: Y-axis CNC for pressure zone - Code 0000682: Two-position edge magazine for SP10 and SP20 - Code 0000144: Additional glue pot Gujdpjxala Tsfx Afioh - Code 0000367: IT90-S end trimming unit, 2×0.3 kW, 12000 rpm - Code 0000704: Solid wood edge kit up to 20 mm thickness for IT90 - Code 0000711: 3-position pneumatic kit for IT90 - Code 0000151: RS10 flush trimming/pre-milling unit – straight tool, L=20, 2×1.3 kW, 12000 rpm - Code 0000901: Increased straight tool (L+30, solid wood) for RS10 - Code 00000152: 2.4 kW motors for RS10 flush trimming unit – straight tool L=30 - Code 00000536: Automatic 2-position adjustment for RS10 - Code 00000158: RF=40 angle trimming unit, 25° bevel, R=1.5/2/3 mm, 2×0.65 kW, 12000 rpm - Code 0000651: Copying shoes for RF10-RF30-RF40 groups - Code 0000579: AR30 multifunction corner rounding unit, R=2 mm - FAST system with 2 pre-selection positions via control panel - 2×0.35 kW, 12000 rpm - Code 0001017: 4-position pneumatic system for AR30 - Code 0000165: RB10 edge scraper group, R=2 mm - Code 0000652: Copying shoes for RB10-RB30-RB40 groups - Code 0001004: RC20 glue scraper group - Code 0000171: SZ30 superimposed oscillating brush group, 2×0.18 kW, 1400 rpm - Code 0000989: Liquid jet application kit for SZ30, SZ60 - PH10 edge band pre-heater WITHOUT PANEL RETURN

Year of construction: 2001, condition: used, SECOND-HAND CNC WORKING CENTER 4 AXIS BIESSE MOD. ROVER 24 S 6.5 - working dimensions: X = 3000mm ; Y = 1350mm ; Z = 155mm - tool changer 9 slots - ISO 30 - drilling head 16 spindles Guedpfjh U R Suex Afieh - saw blade group - axe C - Vacuum pump Becker 100 mc/h - n. 6 working consoles - 7.5 bars - CE (year 2001)

Condition: used, functionality: fully functional, Ferwood Code: AGG0056 - Condition: Used - Functionality: Fully operational - Compatible Machine: CNC BIESSE ROVER - If interested, we offer a refurbishment service, please contact us. Weight and dimensions for transport: 4 kg, 36x26x21 cm Gsdpsvu Aqisfx Afiouh

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum tool capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Stock location: Röllbach Gujdpfxowwnf No Afioh

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements depth 5213 mm Machine weight 3600 kg Main Drive Spindle motor power 8 kW Number of axis 4 Additional Equipment Pre-milling Unit: Yes Glue Application Unit: Yes End Trimmers: Yes Gedpfx Asw N Tl Rsfisuh Top/Bottom Trimmers: Yes Corner Rounding Unit: Yes Scraping Unit: Yes Glue Scraping Unit: Yes Glue Buffing Unit: Yes This 4-axis BIESSE Jade 240 was manufactured in 2021, featuring a single-sided automatic edgebander design. It offers a feed speed of 12 m/min and can handle panel thicknesses from 10 to 60 mm and edge thicknesses up to 8 mm. Equipped with comprehensive units including pre-milling, glue application, and end trimmers, plus a touch screen control for enhanced usability. Consider the opportunity to buy this BIESSE Jade 240 edgebander. Contact us for more information. Application Types Edge Banding

Condition: used, Year of construction: 2023, Numerical Control BH 660 with BSolid Working range on X-axis mm 4320 Working range on Y axis mm 1660 Working range on Z axis mm 200 No. 2 work fields on X axis Bar worktop No. 8 adjustable bars for suction cup support No. 8 pneumatic bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 5-axis vertical electrospindle, with automatic tool change, liquid cooling, HSK63 type cones, KW 13 (HP 17.4) Automatic tool change system with 16 positions with revolver positioned along the X axis on the back of the machine Automatic tool magazine with 12 positions positioned on the machine side BH24 L drilling head with spindles arranged as follows: - No. 8 verticals on X axis - N° 6 verticals in Y axis - N° 6 horizontal on X axis - N° 4 horizontal in Y axis - N° 1 Integrated blade for making grooves Chip evacuation system with motorized belt Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning of machine control 250m/c vacuum pump TECHNICAL DETAILS TO BE CHECKED Guodpfx Aewgc D Esfijh

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Machining head with revolver tool change BH39 drilling machine, 250m3 vacuum pump Gusdpfx Ajukcy Eefish (this machine had been in operation for 10 years in a woodworking school)

Condition: used, machine/vehicle number: 008134, X axis working area: 5780 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Gsdow Idgijpfx Afieuh Total number of drilling spindles: 32 Total number of tool changer positions: 28

Condition: used, functionality: fully functional, Ferwood Code: AGG0049 - Manufacturer Code: 6314A0354 - Condition: Used - Functionality: Fully operational - Compatible Machine: CNC BIESSE ROVER - If interested, we offer a refurbishment service, please contact us. Transport weight and dimensions: 9KG, 46X39X27 CM. Godpfovu Amwjx Afiouh

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 140 mm, feed rate X-axis: 75 m/min, feed rate Y-axis: 75 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: XNC, spindle speed (min.): 1,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 11,000 W, number of spindles: 1, number of slots in tool magazine: 7, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, Biesse Rover 23 woodworking center – fully equipped Still in use to this day, 1 to 2 days a week, but for sale due to business closure in Slovakia. Always well maintained. Guodpfxjw S Edws Afijh ✅ Powerful performance Milling spindle with ceramic bearings (11 kW) Adjustable speed: 1,000 – 24,000 rpm Drilling head with 10 vertical and 6 horizontal drills Circular saw on the X-axis ✅ Efficient & flexible Pneumatically adjustable vacuum pods in 6 rows, 3 per row 100 m³ vacuum pump Tool magazine with 7 positions (ISO 30) All adapters and tools included ✅ User-friendly Conveyor belt for automatic chip removal Immediately operational, fully equipped 📍 The machine is located in Slovakia and must be disassembled and collected by the buyer on site.

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 1590 kg Additional Equipment Pneumatic Roller Position Selection /Manual Plate Adjustment with Scale /Automatic Thickness Adjustment with Digital Working Height Display /Pinch Roller /Air Cleaners on Platen Head for Belt Cleaning and Cooling/Dual Load Gauges /Additional and Output Extension Table with Rollers Air Requirements: 6 Bar This BIESSE Levia 110 belt sander was manufactured in 2005. It features a maximum working width of 43 inches and belt capacity of 44" x 85". Equipped with a steel contact roller and a rubber roller, it ensures precise sanding. The machine includes automatic thickness adjustment with a digital display and a variable speed inverter for optimal control. Reach out for more information about this machine. Gujdpfx Afew Ntf Rjijh Application Types Sanding

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 75 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 7.5 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher wagon with 10 clamps Blade carriage speed 1-120 m/min Pusher speed 60 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Guedpfx Afsv Amx Tjieh

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Guodpfx Aow Rpd Sjfieh Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Gedpfx Aow Idc Dsfisuh Corner Rounding Unit: yes Maximum panel thickness: 12 mm Operating Units: 9 nr

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 Gusdpfelc Dwnox Afish From location

Condition: ready for operation (used), Year of construction: 2010, This Biesse Techno Kernell was manufactured in 2010. A used multi-spindle drilling line with stacking system, it features infeed and automatic stacking units by Wamhoff. Ideal for efficient, high-volume drilling operations, this machine includes multiple drilling supports both from above and below. If you are looking to get high quality drilling capabilities consider the Biesse Techno Kernell machine we have for tact us for more information. Godpjw Nb Nwjfx Afijuh Application Types Boring & Drilling (Wood)

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Gsdpfx Afew D E A Eeieuh

Condition: used, machine/vehicle number: 005973, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Operating Units Right Side: 9 nr Gedpjiiipisfx Afisuh Operating Units Left Side: 9 nr