Used Biesse Skill 1536 G Ft for sale (333)

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 Gtedpfjidqd Tsx Agbjt The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: used, machine/vehicle number: 008093, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Godpfx Asx A Hgasgbstt Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 6 nr

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features: Gedpfx Aex Enquogbjtt - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Location: Rhineland-Palatinate Availability: By arrangement Sale on behalf of customer. Details provided without guarantee.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Panel height: 60 mm Gtodpfxox Nav Rj Agbjt Edge thickness (roll): 3 mm Edge thickness (strip): 12 mm Panel length: 3200 mm Calibrating unit End trimming unit Overlapping trimming unit RS-502 Chamfering unit RF100 Rounding unit with two motors Edge scraper unit Glue scraper unit Brushes unit Blower/Hot air unit SMART TOUCH 23" control

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 1590 kg Additional Equipment Pneumatic Roller Position Selection /Manual Plate Adjustment with Scale /Automatic Thickness Adjustment with Digital Working Height Display /Pinch Roller /Air Cleaners on Platen Head for Belt Cleaning and Cooling/Dual Load Gauges /Additional and Output Extension Table with Rollers Air Requirements: 6 Bar Gtsdpfx Agox D Hhgjbjt This BIESSE Levia 110 belt sander was manufactured in 2005. It features a maximum working width of 43 inches and belt capacity of 44" x 85". Equipped with a steel contact roller and a rubber roller, it ensures precise sanding. The machine includes automatic thickness adjustment with a digital display and a variable speed inverter for optimal control. Reach out for more information about this machine. Application Types Sanding

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1000007687, feed length X-axis: 3,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 60 mm, total width: 4,400 mm, total length: 7,290 mm, power: 20 kW (27.19 HP), rotational speed (max.): 18,000 rpm, Short Description Gedpfxox I A A Re Agbjtt X axis working area: 3000 mm Y axis working area: 1000 mm Main electrospindle power: 3.5 kW Number of controlled axes: 3 axes CNC for flexible drilling Type of work: Drilling X axis work area: 3000 mm Y axis work area: 1000 mm Max panel passage: 60 mm No. of work areas: 2 No. of controlled axes: 3 Motor power: 3.5 kW Spindle speed: 18,000 RPM Control unit: PC Control Machine programming software: Biesse Works Safety standard: CE mark Protective mesh secured to the machine Safety system: Front safety mats Total installed power: 20 kW

Condition: excellent (used), Numerical Control Type NC 400 (with work cycle management software) Through-feed motorized conveyoring belts (No.) 2 Gedpfx Aji D D Tfjgbstt Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 No. 4 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 25 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops OPTION: Front feed hopper/loader (for narrow pieces: Min 60mm - Max 260mm)

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Gjdpfx Aowuz Ekegbstt Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, 24 vertical spindles, 10 horizontal spindles, 7-position tool changer, 8 vacuum worktables with digital position display, interchangeable angle gearbox. Usable length of the workpiece support: 3200 mm, width of the workpiece support: 925 mm. Gtodsx Iulwepfx Agbet

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,315 mm, travel distance Z-axis: 150 mm, Equipment: chip conveyor, Number of milling spindles: 1 Gtjdpfx Ajx Ir Sujgbjt Main motor power kW: 10 kW Max rotation speed: 24,000 rpm Aggregate heads: 1 4th axis: C-axis Tool clamping system: HSK-F63 Tool change positions: 12 10-position disc changer: 1 Number of interchangeable heads: 2 Vertical drilling heads: 12 BIESSE drilling unit BH 19 L: 1 Horizontal drilling bits X: 4 Horizontal drilling bits Y: 2 Grooving saw blade in X Lock drilling group: Changeable aggregate Worktable: Console table Workpiece support aid: 1 Number of rails: 6 Positioning assistance: 1 LED number display on consoles: 1 Number of vacuum pumps: 1 Vacuum pump capacity: 90 m³/h Safety device: Safety mat Control: BIESSE XP 600

Year of construction: 2007, condition: ready for operation (used), Main Drive Number of axis 5 Movement X-Axis Movement 4600 mm Z-Axis Movement 275 mm Y-Axis Movement 1935 mm Gsdpfx Agsx D H Hcjbjtt This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 2003, CNC UNICA Wood production year 2003, Uniteam brand since 2016 belongs to Biesse Machine in good working condition, very fast working in x - y - z axis , ideal for milling in wood , MDF, laminated panels Max. useful working area (X-Y-Z) mm 3440 x 1300 x 200 mm Vertical electrospindle motor power 9 kW Gtodpfx Agswk Ekcebjt Machine size 5000 x 2350 x 2200 mm Weight 4000 kg

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. N. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 x HP 1,8 Max. working width (mm) 3200 - Min. working width (mm) 215 N. 7 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 5 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads Godpfshvi Duox Agbott The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: used, machine/vehicle number: 008113, Max. panel width: 3800 mm Max. panel length: 3200 mm Main saw blade projection: 75 mm Gtsdpfx Aew Iddhsgbet No of Grippers: 7

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,390 mm, travel distance Y-axis: 1,535 mm, travel distance Z-axis: 250 mm, 1 Electrospindle, 4 axes Vertical drilling heads: 29 Horizontal spindles on X: 6 Gtodjx Ir Rqopfx Agbst Horizontal spindles on Y: 4 1 independent saw blade for grooving in X EPS automatic positioning of bars and suction cups Vacuum pump Includes 4 aggregates, suction cups, and 8 Uniclamps

Year of construction: 2011, condition: ready for operation (used), Main Drive Spindle speed range 24000 Spindle motor power 86 kW Number of axis 4 Workpiece Workpiece X 4200 mm Workpiece Y 1535 mm Workpiece Z 230 mm Turret Tool taper HSK-F63 Gtodpfx Agjx D Eahobst This 4-axis BIESSE Rover C6 was manufactured in 2011. Ideal for diverse woodworking tasks, it offers precision and versatility. Consider the opportunity to buy this BIESSE Rover C6 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), Double-side Sizing & Edge Banding - First Machine (1st in a line) Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Numerical Control PC base Windows /Software PC / SINTRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Free space EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt Glue + Quick Melt system) SP 30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) Edge coils supporting unit (No. 6 reels) Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (2 x Kw 1) 0°-25° No. 1 Milling grooving unit EB 60 (1 x Kw 5) 0°-90°, ISO 30 motor Profile Scraping unit (Multi-profile, by N.C.) RB 40 Glue scraping unit RC 20 Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37) Gsdpfx Asu Rc Hyegbjtt

Condition: used, machine/vehicle number: 008030, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Gtjdpfewvq Hgox Agbst

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,535 mm, travel distance Z-axis: 250 mm, Vertical electrospindles: 2 Main motor power: 12 kW 4th axis: C axis Tool system: HSK-F63 Tool changer: 22 positions Gtodpfx Agox Ir Eujbjt Vertical drilling heads: 29 Horizontal drilling spindles X: 8 Horizontal drilling spindles Y: 4 Grooving saw in X direction Number of clamps/bars: 8 1 vacuum pump with a capacity of 250 m³/h Safety mat Control: BIESSE XP 600 Software: DIREKT CNC NC-HOPS 5.6 Includes 4 aggregates (door milling, etc.): Drilling, milling and cutting aggregate with 4 spindles Cutting and milling aggregate Lock case aggregate on both sides Lock case aggregate

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) Gtsdeu Rc Anspfx Agbst EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Gedex A Tk Sepfx Agbett Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Total number of drilling spindles: 29 Total number of tool changer positions: 31

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, feed length X-axis: 3,200 mm, feed length Y-axis: 900 mm, 4.5 kW electrospindle with ISO 30 taper Gjdpfxjx Irtxs Agbott

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 Godpfx Aeidmkregbott KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: used, machine/vehicle number: 008184, X axis working area: 8185 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Gtedpfxow Tivgo Agbst Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 200 mm, Equipment: CE marking, chip conveyor, documentation/manual, EPS automatic positioning of bars and suction cups 5-axis electrospindle, 13 kW, HSK F63 interface 10 vertical spindles Gtedpfx Agjx Irmfjbet 4 horizontal spindles X 2 horizontal spindles Y Saw unit, diameter 300 mm Safety system: front and rear bumpers Automatic lubrication system Control panel Bsolid software