Edge banding machine NEW

BIESSE JADE 240

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Hjdpfew I Uxcox Ab Iok Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Hedpfowcyd Iox Ab Isk Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28

Condition: excellent (used), Robland 3200 silver line format saw with a trolley scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley Hodpfx Aev S Hy Asb Isk angle device included Branded machine in very good condition,

Condition: new, Year of construction: 2026, Technical specifications: • Extraction capacity ~ 5200 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 250/200mm • Filter area 13.7 m2 • Speed 28m/sec. • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via a pipe Delivery: - Fulfill H-2 Norms - 5 micron polyester filter Hodpfx Aed H Rf Tjb Iok - 2 containers - Running gear - Filter cleaning using a controlled vibration system + 850 euros for the models with fire extinguisher (Safe System)

Condition: used, Number of boring spindles 10 St. Working width 230 mm Hjdpfsw H Iv Tsx Ab Iek Working height 160 mm Feed motor 5,5 kW Feed speed 6-36 m/min.

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Cup hinge drilling head: yes Drill pitch: 32 mm Hodpfx Abswv Nb Ns Isk Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swivelling

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Hsdpjwb Allsfx Ab Iok Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Total installed power (Kw) 24 BOTTOM WORKING UNITS: Independent vertical boring spindles (No.) 29 Independent horizontal boring spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.) TOP WORKING UNITS: Indipendent vertical drilling spindles (No.) 29 Indipendent horizontal drilling spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.)

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Hedpfx Abjv Sv Eno Isk Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Hodpfx Abswt Snye Iek

Condition: used, Year of construction: 2016, Vitap Eclipse Edgebander for round shaped, curved workpieces Semi-automatic edge banding machine for large round or curved workpieces with a panel thickness between 10 and 60 mm and a belt thickness between 1 and 3 mm. The 60 mm height is only possible with an edge banding thickness of 1 mm. If the edge band is thicker, it depends on the quality of the band and must be tested beforehand in connection with the cutting unit. Description; Two copy rollers for the shape of the workpiece to be scanned Gluing station Glue tray with a capacity of 1 kg Two 800W heating elements with electronic temperature display via the PLC Glue application via glue roller Glue tray made of aluminum for heat distribution Glue supply can be adjusted by means of a button Automatic cutting unit for edge banding material on the roll from 3 to 45 mm Aggregate is activated by a sensor for closed edge tape with a perfect connection or by an encoder if only 1 side is pasted Laser system for length determination, no pre-measurement necessary On-off capability for throughput Hsdpfxswgb Hxj Ab Iek Height-adjustable table for narrow panels On-off capability for milling aggregate Two copy rollers for the shape of the workpiece to be scanned Milling unit equipped with 2 x 0.5 kW (15000 rpm high frequency) with top, bottom and front copy rollers Milling unit equipped with blades R=2, Phase 15°, D=69, Z=6 Large panel turntable with vacuum to hold product (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland