Used Biesse Rover 22 for sale (319)

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 77503, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 25 m/min, overall weight: 6,510 kg, controller manufacturer: SINTRA, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Max. feed speed: 25 m/min MACHINE DETAILS Control: Sintra Weight: 6,510 kg EQUIPMENT - Sanding unit - Coil holder magazine with 2 positions and automatic edge change via CNC - Adhesive unit for EVA hot-melt glue with preheating device and glue pot - Preparation for adhesive unit for PUR glue - Pressure group for straight profiles with electronically adjustable pressure rollers via CNC - End trimming unit with 2 motors and automatic tilt adjustment - Filler unit with 2 vertically aligned motors - Edge smoothing unit with 2 swivelling motors - Multifunctional 4-motor corner rounding unit (smoother + corner rounder) with numerical control in automatic adaptation - Anti-stick unit - Adjustable edge scraper unit - Glue-saving unit - Oscillating brush unit - Electronically adjustable working height - Motorized rubber belt with increased pressure - Motorized and electronically adjustable panel guide Hsdjydidropfx Ag Ajff - Side roller conveyor with idler rollers for panel support

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 21090, functionality: fully functional, feed rate X-axis: 25 m/min, overall weight: 3,800 kg, controller manufacturer: SINTRA, Dismantling and loading can be carried out by the seller! TECHNICAL DETAILS Feed speed: 25 m/min 2nd pass: 18 m/min MACHINE DETAILS Control: SINTRA Weight: 3,800 kg Air supply: 7 bar Extraction volume: 30 m/sec EQUIPMENT - CNC-adjustable working height - Infeed fence controlled by CNC - Side fence with idler rollers for panel support - Upper pressure unit with motorized belt - Anti-adhesive unit - Pre-milling unit - Panel edge pre-heating unit with lamps Hfedpfx Aeydc Scsg Ajf - EVA adhesive application system - EVA glue premelter - Pressure rollers 1 + 5 - End trimming unit with 2 motors and automatic angle adjustment - Rough milling - Fine milling unit with 2 tilting motors and automatic adjustment via CNC servo motors - Multifunction unit (fine milling + corner rounding) with 2 motors and automatic CNC adjustment - R1 R2 edge scraping unit (NC pneumatic positioning) - Groove unit - Glue scraping unit with anti-adhesive spray system - Polishing unit with 2 motors for panel cleaning

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt adhesive specification used, good condition make Artech-Biesse type Single year of manufacture 2007 machine no. 91009 CE type-tested Hfedpfx Aovwgizjg Aof edge thickness 0.4 - 3.0 mm workpiece height min 10 max 120 mm space requirement approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW storage location 97447 Gerolzhofen, free loading, unpacked handed over in the current condition as viewed, without guarantee and warranty

Condition: good (used), Year of construction: 2003, CONTROL SYSTEM • Numerical control: NC 1000 TECHNICAL FEATURES • Useful working area “X” (min – max): 300 – 2.500 mm • Useful working area “Y” (min – max): 250 – 700 mm • Useful working area “Z” (min – max): 13 – 50 mm WORKING UNITS • Nr. 1 + 1 Drilling units on Nr. 2 independent movable beams completed of: – Nr. 20 + 20 Vertical drilling spindles – Nr. 3 + 3 Double horizontal drilling spindles in “X” – Nr. 1 + 1 Double horizontal drilling spindles in “Y” Hfsdjiy Eaaepfx Ag Aof • Nr. 2 Inserting units for hinge plates and hangers

Condition: good (used), LINE BORING MACHINE BIESSE TECHNO 7, CE DESCRIPTION: Hedpfovn Rkwjx Ag Ajff - No. 5 lower vertical groups - 10 spindles for the vertical drilling heads - 2 (1+1) horizontal groups - 20 spindles for the horizontal drilling heads - Working area on the "X" axis: 3200 mm - Min. drilling distance between the vertical groups on the "X" axis 96 mm - No. 2 belt conveyors, 1 fixed and 1 adjustable according to the width of the panel - No. 2 pressers - Automatic adjustment of the bottom stop heights from the control panel - 3 lower vertical groups - Adjustment via electric selector with display of the "X" axis position of the vertical groups - Automatic adjustment from the numerical control of the "X" axis position of the mobile horizontal group - CE standards

Condition: good (used), Biesse B/5 pass-through drilling machine composed of: Hodevu Rpgopfx Ag Aeff No. 2 Units with 22 lower vertical drilling spindles No. 1 Unit with 22 horizontal drilling spindles No. 4 Upper vertical pressers Installed power kw 7.5 Air pressure 7 bar

Condition: good (used), TECHNICAL DATA *Min/Max panel height: 10 / 60 mm *Min/Max edge height: 15 / 65 mm *Min/Max edging thickness: 0.3 / 3 mm *Panel overhang from conveyor belt: 35 mm *Minimum panel length: 240 mm *Minimum panel width: 240 mm *Feed speed: (to be confirmed) *Pneumatic connection: available LINE CONFIGURATION *Shaper unit (toupie) *Double pre-milling unit *Gluing unit *6-position edge magazine *End trimming unit *Overlapping double trimming unit *Corner trimming unit *Rounding unit with 4 motors *Shaper unit (toupie) *Edge scraping unit *Glue scraping unit *Hot air unit (phon) Hjdpsvvcd Sefx Ag Aoff *Brushing unit *NC 410 control system AUTOMATION *RBO gantry loader model SELECTA C, double station *RBO rotary panel turner model GP

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Panel height: 60 mm Edge thickness (roll): 3 mm Edge thickness (strip): 12 mm Panel length: 3200 mm Calibrating unit End trimming unit Overlapping trimming unit RS-502 Chamfering unit RF100 Hfsdpfx Ajx Nav Rog Aef Rounding unit with two motors Edge scraper unit Glue scraper unit Brushes unit Blower/Hot air unit SMART TOUCH 23" control

Condition: excellent (used), FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling. also for NARROW PIECES (min. mm 65). With 3 full-CN drilling machines (1 for side-drilling on lenghtwise) and 1 Splitter Composed of the following machines: W05024A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C W05024B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024D) 1st 90° Turning device "RBO (BIESSE)" Mod. GPK-1 (Lengthwise to Crosswise) W05024E) Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB2 / 11.0 W05024F) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024G) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024H) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (Crosswise to Lengthwise) W05024I) Multi-Borer, with CN "BIESSE" Mod. Techno FDT (side-drilling on lenghtwise) W05024J) Splitting Saw (Splitter) Lengthwise "TECNOLOGICA" W05024K) Brush-cleaning machine "WANDRES" Hsdpfxetr Envj Ag Ajff W05024L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner S

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 3000, with automatic handling. Composed of the following machines: X03001A) Double Loader "RBO" Mod. Winner C 3200 with central motorised roller conveyor X03001B) 1st Double-side Sizing & Edge Banding "BIESSE" Mod. Stream SB 1 - 7.5 X03001C) Turning station (90°) lengthwise to crosswise "RBO" Mod. GPK 1 X03001D) 2nd Double-side Sizing & Edge Banding "BIESSE" Mod. Stream SB 2 - 11 Hjdpfxei Rbg Tj Ag Aoff X03001E) Turning station (90°) crosswise to lengthwise "RBO" Mod. GPK 2 X03001F) Double Stacker "RBO" Mod. Winner S 3200 with central motorised roller conveyor

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units Hedpfx Asdfgg Ieg Ajff E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 Hfedpfxsttgy Hs Ag Aof E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Hfsdpfxjflc T Ss Ag Asf Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Hfsdjd Rg Dzspfx Ag Ajf Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader Hfedpfscggy Ssx Ag Aof - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3 Hjdpod Rg Dpefx Ag Aeff

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer Hfsdpfed Nviqsx Ag Asf VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) Hjdpfscr U Urox Ag Aeff SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) Hsdpfx Ageg Urn Es Ajff - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Numerical Control Type NC 400 (Software) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Hjdpfx Agegk T Tte Aoff No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 48 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Loader (Bridge Frame) "RBO" Double Station, Mod. Advantage C B) Motorized Roller table "RBO" with turning device 90° (length to crosswise) C) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 Centre A: No. 2 Electro-spindles ISO 30 (Kw 3,7 each) with tool-holder magazine with 3 places each. Centre B: No. 2 predispositions for the installation of other 2 electro-spindles No. 2 tool-holder magazines (revolver) with 56 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) D) Connection transfer, with upsidedown turning machine (180°) "RBO" Mod. Ribaltatore E) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units(1 left+1 right)with 4 BH18 heads with 18 spindles(36 right + 36 left),total 72 Centre A: No. 2 Electro-spindles ISO 30 (Kw 4,5 each) with 3 tool-holder magazine each. Centre B: No. 2 predispositions to install another 2 electro-spindles No. 2 tool-holder magazines (chain) with 60 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) Hfjdpfx Asgvdkgeg Asf F) "BIESSE" RD dowel insertion unit No.2 horizontal units(1 right+1 left)with 5 insertion nozzles each (5 left + 5 right), tot. 10 nozzles G) Stacker (Bridge Frame) "RBO" Double Station, Mod. Advantage SC

Condition: excellent (used), Electronic programmer RT 483 No. 2 Through- feed motorized conveyoring belts Feeding speed (55 m/min ca.) No. 2 Horizontal units/supports No. 1 Drilling heads for each horizontal unit/support (1 x HP 1,5) No. 20 Spindles for each horizontal drilling head Max. working width (mm) 3200 Min. working width (mm) 220 No. 7 Bottom vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Top vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Vertical top pressure clamps No. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display Hfedpfjfz Nanox Ag Asf Total power installed (Kw) 35,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels Hedpfxsd Tyvxe Ag Asff - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Hsdelwqrtjpfx Ag Asff Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Hfsdpfou Tg Uqex Ag Ajf Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Profile Scraping unit (Multi-profile, by N.C.) RB 30 Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle