Double Sided Squaring/Edgebanding Machines

BIESSE OMNIA SB

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Lredpfx Asyq Avhob Aeu Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: used, functionality: fully functional, mileage: 141,887 km, first registration: 09/2011, fuel type: electric, empty load weight: 1,100 kg, maximum load weight: 1,000 kg, overall weight: 48,000 kg, tire size: 445/95 R25, tire condition: 80 %, axle configuration: 8x6, wheelbase: 165,000 mm, axle spacing: 415,000 mm, next inspection (TÜV): 03/2026, fuel: diesel, energy efficiency: A, fuel tank capacity: 400 l, fuel consumption (urban): 60 l/100km, fuel consumption (extra-urban): 70 l/100km, fuel consumption (combined): 65 l/100km, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: none, number of seats: 3, total length: 12,000 mm, total width: 275,000 mm, total height: 4,000 mm, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, Year of construction: 2011, operating hours: 11,767 h, Equipment: ABS, EBS, USB port, air conditioning, airbag, car registration, crane, electric window regulation, fog lights, full service history, navigation system, onboard computer, power assisted steering, soot filter, tire pressure monitoring, traction control, truck registration, Mobile crane Liebherr LTM 1100 from 2011 for sale, in excellent working and visual condition. The machine has always been regularly serviced and well maintained. Main specifications Lsdpoyvrrksfx Ab Aoru Make / Model: Liebherr LTM 1100 Year: 2011 Capacity: 100 tons Upper structure hours: approx. 11,767 h Carrier hours: approx. 6,355 h Mileage: approx. 141,887 km Condition: Very good – ready to work Well maintained crane, suitable for construction, industrial lifting and assembly work. 📍 Location: Portugal 📞 For more information or inspection please contact us.

Condition: new, Year of construction: 2026, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw Lsdsmb U T Hopfx Ab Aoru • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: new, functionality: fully functional, Year of construction: 2026, XR500 sandwich panel assembly vacuum gripper Maximum lifting capacity 600kg 8 suction cups measuring 16cmx42cm 2 wall suction cups measuring 16cmx42cm Extension – 4 pcs. Battery powered Mounting position; vertical/horizontal Securing belts for roof and wall panels (1 set) Securing belt mounts Lodjv I Uc Rjpfx Ab Ajru Roof kit, intermediate 2 x 2 suspensions – without suction cups (1 set) Transport wheels Transport basket Additional options: • remote control • narrow suction cups 8x50 cm • two vacuum circuits • spare seal • spare batteries • possibility of extending the frame to 8 m

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins Lredpeifnxxefx Ab Asu SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: new, functionality: fully functional, Year of construction: 2009, excellent condition Lrsdpfx Aoz R Nu Aeb Asu