Used Biesse Rover 22 for sale (320)

Condition: used, machine/vehicle number: 008414, X axis working area: 3140 mm Y axis working area: 1500 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 13 Hodpfxsywafhs Agfsff

Condition: used, machine/vehicle number: 008272, Position 1: 5 Axis CNC Routers BIESSE + KUKA-ROVER A + KR210 R3100 Position 2: Robot BIESSE + KUKA-ROVER A + KR210 R3100 Hsdpfjx A Tfvjx Agfsff

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Travel Paths: • X-axis: 6170 mm • Y-axis: 1395 mm • Z-axis: 180 mm Machine Structure: • Gantry design with moving machining unit • 10 consoles (ATS) with adjustable vacuum pods • 30 movable support elements • Multi-zone vacuum system (4 working areas along the X-axis) Installation Dimensions: • Machine length: approx. 8850 mm • Machine width: approx. 4020 mm • Working length: approx. 7300 mm Clamping and Vacuum System: • 2 vacuum pumps each with 90 m³/h capacity • Vacuum modules in various sizes (360° rotatable) • Pneumatic clamping systems: • Front stops • Side stops (left/right) • Central stops • Uniclamp clamping units for workpiece thicknesses 40–98 mm • Sensors for recognising lowered stops Machining Units Main Spindle: • Power: 7.5 kW to 12 kW • Speed: up to 24,000 rpm • Tool holder: HSK F63 Drilling Head: • Vertical spindles: • 10 along X-axis • 10 along Y-axis • Horizontal spindles: • 6 along X • 2 along Y Additional Parameters: Hsdpfoyvz Emjx Agfjff • Max. drilling diameter: 35 mm • Usable length: 45 mm • Max. projection: 60 mm Tool Change System Turret Tool Changer: • Capacity: 18 tools • Holder: ISO30 / HSK F63 • Max. tool diameter: 200 mm • Max. tool length: 160 mm Additional: • Pick-up changer with 2 positions • Provision for aggregates (e.g., saw units up to Ø 270 mm) Electrical: • Connection: 400 V / 50 Hz / 3 phase • Power: 22 kW Compressed Air: • Connection: 3/8" • Working pressure: 6 bar • Consumption: approx. 400 NL/min Extraction: • Connection diameter: 250 mm • Air flow requirement: 5300 m³/h • Air velocity: 30 m/s • Pressure loss: 1500 Pa Mechanical Data • Machine weight: approx. 4750 kg Additional Equipment • Automatic central lubrication • Chip conveyor • Air blast device for spindle • Pneumatic pre-installation system • Safety equipment according to Directive 98/37/EC • CNC control (Biesse system)

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head Hfjdpjh Txlcjfx Agfjf

Condition: used, CNC machining center for drilling and milling operations on wood panels and derivatives, plastics and non-ferrous alloys. Working area X - Y - Z: 3685 - 1508 - 150 mm Continuous worktable Lateral and frontal reference stops Pendular working mode 2 independent working areas allowing simultaneous machining of 2 identical, mirrored or different parts Five-sided machining of the workpiece “Gantry” structure Hfsdpfx Agoywxc Sefjf 4-axis milling unit, HSD brand Tool holder: HSK F63 Max rotation speed: 24,000 rpm Inverter 10-position tool magazine on the head Max tool diameter: 215 mm Max tool weight: 4 kg BiesseWorks software Easy programming File import capability Control panel / remote console Teleservice and video diagnostics: real-time support Automatic guide lubrication Vacuum pump: 1 x 250 m³/h Centralized suction pipe diameter: 250 mm Safety devices Side protection strips for the unit Safety photocells instead of mats Perimeter guards with access door Compressed air consumption: 400 NI/min Operating pressure: 7–7.5 bar Air consumption for extraction: 5300 m³/h Machine weight: 4,600 kg Machine documentation: user and maintenance manual, software manual, spare parts catalogue, electrical diagram, CE conformity declaration.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,140 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It features a working range of 4140 mm in the X-axis, 1270 mm in the Y-axis, and 275 mm in the Z-axis. The machine is equipped with brushless motors and a PC-based control system for enhanced performance. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A 1242 machine we have for sale. Contact us for further details. • Working range • Y (5-axis): 1270 mm • Y (4-axis): 1260 mm • Z (with H=74 mm vacuum modules): 230 mm • Z (with H=29 mm vacuum modules): 275 mm • Axes and drives • X & Y: Rack and pinion drive; accuracy class 6 • Z: Ball screw with preloaded nut; accuracy class ISO C7 • Motors: Brushless motors with digital drives via Mechatrolink system • Control system and PC hardware • Control: BH660 (PC-based) with WRT (Windows Real Time) technology • CPU: Intel Core i5 or higher • RAM: 16 GB • Storage: 256 GB SSD or higher • Monitor: 21.5-inch LCD color screen • Operating system: Windows with real-time process management extension • Connectivity: Ethernet card; USB ports • Electrical and pneumatic • Power supply: 380 / 400 / 415 V – 50/60 Hz • Control voltage: 24 V DC (stabilized power supply) • Cabinet cooling: Air conditioning system for operation up to 40°C (104°F) • UPS (uninterruptible power supply): 7–10 minutes runtime for data protection • Workpiece support (ATS system) • Workpiece supports: 8 ATS aluminum supports on linear guides • Module carriers: 24 carriers (132 × 132 × H41.5 mm) with pneumatic clamping Hodpfsyt Rrvex Agfeff • Set-Up Assistant (SA): Manual positioning with LED indicators; ±1.5 mm precision • Vacuum zones: 2 independent work areas in X; 2 independent clamping areas in X • Software and licensing • Primary software: NC-HOPS 7 MacroCAM • Safety and maintenance • Safety system: Bumper system (front and rear) for immediate stop upon collision • Protection: Polycarbonate transparent front plate and sound-absorbing cover • Lubrication: Automatic lubrication system for linear guides and rack/pinion Additional equipment • Vacuum pumps (supported/optional): Up to two units, 90/100 m³/h or 250 m³/h each

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, number of spindles: 21, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Hfodpoytr Rysfx Agfjf Number of tool positions: 10 MACHINE DETAILS Total power: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and milling cutters are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side missing). The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8174

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, X working area: 3200 mm Y working area: 1200 mm Electrospindle Vertical drilling heads: 10 Horizontal drilling heads X: 4 Horizontal drilling heads Y: 2 Grooving saw blade in X direction 16-position tool changer Worktable with 6 beams Software: Biesse Bsolid Hfjdpfxjyv Avms Agfef PICCHIO 2200 vacuum pumps, 90 m3/h Safety mats Protective nets

Condition: ready for operation (used), Year of construction: 2018, This 4-axis BIESSE Rover S FT 1536 was manufactured in 2018. It features a robust gantry design, a working area of 3765 × 1560 mm, and a main spindle power of 13.2 kW. Equipped with a HSK-F63 tool holder system, 12-position disc-type tool changer, and a BIESSE BH 10 drilling unit with comprehensive vertical and horizontal drilling capabilities. It also includes a grid vacuum table, dual 500 m³/h vacuum pumps, and is DXF file compatible. Contact us for more information about this machine. • Weight (kg): 3000 • Main Spindle: 1 spindle, 13.2 kW • Axes: 4 • Working Area (X × Y): 3765 × 1560 mm • Torque Support: 4th axis (C-axis rotation) • Tool Holder System: HSK-F63 • Tool Change Positions: 12 (disc-type changer) • Tool Length Measurement: Yes • Drilling Unit: Vertical Drills: 10, Horizontal Drills: 4 (X direction), 2 (Y direction) Hjdpfx Agox D Iqvefjff • Grooving Saw: In X direction • Vacuum Table: Grid table • Vacuum Pumps: 2 × 500 m³/h • Extraction System: Sweeping arm discharge device • Lubrication: Automatic • Air Blowing Device: Yes • Control System: Interface with DXF file compatibility • CE Marked: Yes • Tools, tool holders, aggregates, and mechanical clamps shown in photos or videos are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • 16 vertical and 4 horizontal boring spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Hsdjx D H Hcspfx Agfsff Additional equipment • additional refurbished 5-axe main spindel available • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: ready for operation (used), Year of construction: 2010, number of axes: 5, This 5-axis BIESSE ROVER C9.5 was manufactured in 2010. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 25 vertical and 6 horizontal spindles, and a 5-axis electric spindle (11 kW HSK F63). It boasts high travel speeds (X/Y: 100 m/min, Z: 30 m/min) and a total installed power of 35.7 kW. If you are looking to get high-quality woodworking capabilities, consider the BIESSE ROVER C9.5 machine we have for sale. Contact us for more information. • Working Area: X=4600 mm, Y=1935 mm, Z=275 mm • Travel Speed: X-axis: 100 m/min, Y-axis: 100 m/min, Z-axis: 30 m/min • Vertical Spindles: 25 • Horizontal Spindles: 6 • Tool Changer: Revolver type with 8 positions, Chain changer Hedpex Tka Ujfx Agfjff • 5-axis Electric Spindle: 11 kW HSK F63 • Installed Power: 35.7 kW

Year of construction: 2020, condition: ready for operation (used), Main Drive Spindle motor power 13.2 kW Spindle Speed 24000 RPM Number of axis 3 Movement X-Axis Movement 3765 mm Hfsdpex Nr Npjfx Agfef Z-Axis Movement 378 mm Y-Axis Movement 1560 mm This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5" LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, X working area: 4600 mm Y working area: 1535 mm Z working area: 275 mm 5-axis electrospindle Additional Z-axis support for rear processing units with independent Z-axis Vertical drilling spindles: 29 Horizontal drilling spindles on X-axis: 8 Horizontal drilling spindles on Y-axis: 4 1 grooving saw blade in X direction, diameter 120 mm Hedpfsyvkymex Agfeff Chain-type tool changer with 33 positions Pick-up tool changer NC-controlled tool identification system Automatic lubrication system Safety mats XP600 control system, fully PC-based NC-Hops programming system, 1x machine license NC-Hops 7.x Electrical installation, control cabinet, air conditioning Chip conveyor Vacuum system for 1 vacuum pump 250 m³/h

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, number of axes: 4, table length: 4,300 mm, table width: 2,200 mm, number of spindles: 40, tool diameter: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Hfedpfxjyq Ez Tj Agfef Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of stations in tool magazine 1: 22 Number of stations in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT • Automatic panel loading system • Automatic panel stacking system • Lift table • Conveyor system • Vacuum pump Note: The safety fences at the rear and on the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered as-is, in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive materials. The buyer has the right to inspect the machine prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness (edge banding unit): 14 - 60 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of suction beam traverses: 10 Milling Unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Glue unit Tool magazine Grooving unit Number of places in tool magazine: 22 Hfodeyqzrnepfx Agfsf MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety grid Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8011

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Hfsdpfx Ageyqxxrsfjf Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, Year of construction: 2002, functionality: fully functional, Working range X 6,170 mm Working range Y 1,380 mm Working range Z 155 mm Main motor Kw7.5 kW Max rotation speed 24,000 rpm Aggregate heads 4. axis C-axis tool change positions 10 vertex boring heads 20 Horizontal boring heads X 6 Horizontal boring heads Y 2 Arm structure Work surface Console table Number of bars 10 Positioning aid Vacuum pump capacity 2 x 125m³/h Hfjder E A U Ispfx Agfsf Chip conveyor belt

Condition: excellent (used), Year of construction: 2015, Working range X 6,400 mm Working range Y 1,500 mm Hfjdpfx Agewlcqvofef Working range Z 1,500 mm Number of milling spindles 1 Main motor Kw 13 kW Max rotation speed 24,000 rpm Tool fixing system HSK-F63 Tool change positions 8 Vertical drilling heads 20 Horizontal drilling tips X 4 Horizontal drilling tips Y 4 N.2 vacuum pumps of 360 m³/h Nesting Remote control BIESSE WORKS software Overall dimensions: 11004×5334 mm Weight 4900 kg

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Hfodpfou Tliyex Agfof Total number of drilling spindles: 18 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Hodpfjw Idgvex Agfeff Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 007813, X axis working area: 3390 mm Y axis working area: 1552 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 34 Total number of tool changer positions: 12 Hsdpjx A Thdofx Agfoff

Condition: ready for operation (used), Year of construction: 2009, Travel ranges working area 1: X: 6450mm, Y: 1535mm, Z: 250mm, working area 2: X: 6200mm, Y: 1535mm, Z: 250mm, working area 3: X: 6200mm, Y: 1520mm, Z: 275mm, axis travel configuration 1: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 2: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 3: X: 6820.5mm, Y: 1963mm, Z: 663mm (5-axis head), Z: 350mm (additional machining units), control: Biesse XP600. Maintenance: complete C-axis was replaced in 2015 including accessories, vacuum pump was fully replaced in 2016 including bellows, hoses and additional components, in 2021 the machine was equipped with a new high-performance control PC running a current Windows 10 operating system. With extensive documentation. An on-site inspection is possible. Hjdpfx Ageylziiofjff

Condition: excellent (used), Working center with edgebanding unit in very good condition. Hedpfx Ajylcgpjgfsff Technical data will be updated soon.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Biesse Rover A 1542 CNC Machining Center Working area X: 4140 mm Hedpfjyh Nd Rsx Agfsff Working area Y: 1560 mm Working area Z: 245 mm 5-axis electrospindle, HSK-F63 interface Vertical drilling heads: 17 Horizontal drilling heads in X: 6 Horizontal drilling heads in Y: 4 Grooving saw blade 25-position tool changer Worktable with 8 beams

Condition: used, Year of construction: 2008, Biesse Rover A 3.40 FT K2 Numerically controlled machining center ROVER A 3.40 FT K2 Working fields: X = 3685 mm; Y =1290 mm; Z = 160 mm The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum Pump 300 m3/h 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowingunit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 BIESSEWORKS BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with mats (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Hfjdpox Afvtofx Agfof Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland