Used Biesse Artech Akron 245 for sale (328)

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Prjdpfxjugpwne Af Seb Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Automatic edge banding machine Information available upon request. Predpfez Evg Esx Af Ssb

Condition: used, machine/vehicle number: 007645, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Podpfx Afjwuz Nio Sjrb Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B AIRTEC Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B AIRTEC Podpfswukywjx Af Serb

Condition: good (used), Year of construction: 2017, On behalf of our client, we offer for sale a Biesse machine approximately 10 years old in good condition. A suitable investment for starting new production with a limited budget. Predpfeywup Uox Af Sob

Condition: used, Year of construction: 2014, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, working width: 3,200 mm, The machine has the following configuration: Number of machining units: 8 Pressure bar: With rubber belt Panel support stop: Present Overpressure: Present CNC positioning: Present Panel infeed trimming system: Present Number of units in the trimming area: 1 Number of units in the edge processing area: 6 Trimming unit Unit: Flush trimming unit Manufacturer/Model: RT30 Automatic time intervention: Present Motor power: 3.5 kW Speed: 9,000 RPM Edge banding Glue application system: EVA Podpfxjz Ekh Ds Af Serb Heating lamps for edges: Present Edge magazine: Roller magazine Number of magazine positions: 6 Hot melt glue tank: Present Hot melt glue pre-melter: HM20 Pressure roller unit: Present Number of pressure rollers: 4 CNC positioning: Present End capping unit Manufacturer/Model: IT90-S Number of motors: 2 Maximum processing speed: 28 m/min Motor power: 0.65 kW Speed: 12,000 RPM Corner milling unit Manufacturer/Model: RF10 Number of motors: 2 Motor power: 1 kW Speed: 12,000 RPM Corner rounding unit Manufacturer/Model: AR30 Number of motors: 2 Automatic tool changer: Present Maximum processing speed: 18 m/min Motor power: 0.65 kW Speed: 12,000 RPM Edge scraping unit Manufacturer/Model: RB40 CNC positioning: Present Glue scraping unit Manufacturer/Model: RC20 Brushing unit Manufacturer/Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Speed: 1,400 RPM TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Minimum panel width: 100 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Electrical connection power: 25 kW EQUIPMENT CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5062

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 1000024667, functionality: fully functional, input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,600 mm, workpiece width (max.): 900 mm, workpiece height (max.): 60 mm, workpiece weight (max.): 50 kg, total height: 28,840 mm, total length: 64,500 mm, total width: 21,320 mm, overall weight: 1,800 kg, Equipment: CE marking, documentation/manual, For sale: Biesse Brema Eko 2.1 CNC machining center. Machine from 2018, very little use. Operating hours: - Drilling head: 2883 hours - Electrospindle: 535 hours - Saw: 1253 hours Machine condition: Very good Program: bSuite3 The Biesse Brema EKO 2.1 is a compact and versatile CNC machine that enables the processing of parts of various thicknesses and sizes while taking up less space. It is an ideal solution for "just-in-time" production for craftsmen, small businesses, and for the production of special parts in large companies. Panel dimensions: Panel length (X): 200 – 2600 mm, Podpfxoz Azbfe Af Sjrb Panel width (Y): 35 – 900 mm, Panel thickness (Z): 8 – 60 mm, Maximum panel weight: 50 kg. BH17 self-selecting drilling unit with 14 vertical spindles + 8 horizontal spindles + 1 120 mm diameter grooving saw, 5.5 kW (6 HP) electrospindle with ISO30 mounting, Foot pedal for opening/closing the clamp Extensions for loading and unloading the table.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Prodpfxowlbxle Af Sob Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. Predszyrpnjpfx Af Sjb The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: used, Year of construction: 2008, machine/vehicle number: 97457, functionality: fully functional, input voltage: 380 V, input current: 52 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 1,550 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, number of slots in tool magazine: 120, actuation type: electric, total height: 2,600 mm, total length: 6,500 mm, total width: 7,500 mm, overall weight: 12,000 kg, Equipment: CE marking, documentation/manual, FTT Insider R8 drilling center with transverse feed, equipped with 4 upper tool heads. Each head features: a) two sets of vertical drills with a 32mm spacing: 18 spindles in the Y-axis, 14 spindles in the X-axis, and an additional 4 horizontal spindles in the Y-axis. b) an electric spindle unit with a power of 3.8 kW and an ISO30 chuck. The machine also has two horizontal drilling units, each consisting of two units equipped with 18 spindles with a 32mm spacing. The machine is equipped with two chain-type tool magazines for vertical drills: 60 positions each. Pedpezypnbsfx Af Serb Belt conveyors at the inlet and outlet allow for manual loading of parts; it is also possible to operate the machine in a production line.

Condition: used, Year of construction: 2012, input voltage: 400 V, input frequency: 50 Hz, number of slots in tool magazine: 8, Equipment: CE marking, Biesse Klever 1836 G FT CNC machining centre Description Technical data: Working field: X = 3811mm, Y = 1876mm, Z = 150mm Axes stroke: X = 4201mm, Y = 2016mm, Z = 260mm Maximum axes speed: X = 22.5m/min Y = 22.5m/min, Z = 12.5m/min Safety devices in conformity with the basic safety requirements of the regulation 2006/42/CE Presetting device for contact measurement of tool length with measuring plate diameter 80mm Automatic lubrication system Side rack toolchanger on machine's base frame - for HSK F63 or HSK F50 tools Toolchanger capacity: 10pos. Vacuum locking system - Klever 1836 G FT Work table with prearrangement for vacuum and electrical connection for vacuum pumps. Division of the table in 6 independent vacuum zones with automatic selection. 2 x 300 m3/h rotary claws vacuum pump Prodpfjzqt Erox Af Sob BH 5 boring head can be equipped with up to 5 independent tools for single and multiple borings on panel's top surface. The head is composed of:· 5 independent vertical spindles with a pitch of 32 mm placed along X HSK F63 Electrospindle – 9.0 kW (12 Hp), air cooled in replacement of the one included in the base machine configuration - Inclusive of the 2 nozzles air blower - Inclusive of the electrical and pneumatic pre-arrangement for the BH5 boring head Pre arrangement for tool lubrication system Inclusive of: - X axis cable-holder chain closed version in replacement of the standard one included in the base machine configuration - Mechanical, electrical and pneumatic prearrangement for tool lubrication system Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine BiesseNest (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2018, machine/vehicle number: 1000023651T, functionality: fully functional, power: 50 kW (67.98 HP), input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 3,200 mm, Equipment: documentation/manual, Selco WNAR 6 miter saw center. Pedpfx Afjzl T Hls Sorb

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Working area X: 3280 mm Working area Y: 1320 mm Working area Z: 170 mm 13.2 kW electrospindle Drilling heads for vertical drilling: 10 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 Blade for grooving in the X direction 12-position revolver tool changer Work table with 6 rows Programming software: BiesseWorks 90 m3/h vacuum pump Pedpoz A Iglefx Af Sjrb Safety mats Protective netting Approximate weight: 3000 kg Door and cone grooving unit with ISO30 connection available at an extra cost.

Condition: excellent (used), Year of construction: 2011, Edge banding machine Manufacturer: Biesse Type: Akkron 440 Year of manufacture: 2011 Edge band thickness: 0.4 - 3 /10 mm Workpiece thickness: 10-60 mm Feed rate: 18 m/min Workpiece thickness adjustment: Electric Overall length: approx. 5,100 mm Gluing unit: Yes Pedszltbispfx Af Serb Trimming saw unit: Yes Flush trimming unit: Yes Corner copying unit: Yes Radius trimming blade: Yes Straight trimming blade: Yes Scraping unit: Yes Spray device: Yes

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system Pjdpjzlz Svofx Af Sorb o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 22,000 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece length (max.): 4,600 mm, workpiece width (max.): 1,935 mm, overall weight: 6,200 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, This 5-axis BIESSE ROVER C9.5 Conf.3 was manufactured in 2010. Machine is still working in it original, first-time installation place here in Norway. All yearly services done by Biesse support. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 5 vertical and 2 horizontal spindles, 5-axis electric spindle 11 kW HSK F63 4-axis electric spindle 11 kw HSK 63 3 units for storing of the tools. ETS system for positioning of 8 support beams and 32 vacuum cups Pedpfxez Arvte Af Sjrb 250 m3 Busch vacuum pump. Central lubrication Biesse Work Advantage version . It boasts high travel speeds (X/Y: 100 m/min, Z: 30 m/min) For all technical specification please read included data sheet below. If you are looking to get high-quality woodworking capabilities, consider the BIESSE ROVER C9.5 machine we have for sale. Please contact Rekman Maskin & Service for future information. Rekman Maskin & Service work with Biesse machine since 1986

Condition: excellent (used), CNC CELL with AUTOMATIC panels handling for routering, boring, cutting and edge banding BIESSE Machine with a movable gantry (on the X-axis)–CNC with “bTouch” screen and “bPad” wireless console Software bSolid+bEdge, connection to SOPHIA, IoT (Industrial Internet of Things) platform N. 10 supports ATS (L = mm 1800), with automatic EPS (Electronic Positioning System) Automatic tool change system (Tools storage plate in X-axis / 16 positions) Useful working area (X - Y - Z) mm 6735 x 1650 x 245 (290) Useful working area (X - Y - Z) in edge banding mm 5780 x 1930 x 60 N. 2 Working areas - Vacuum pump (capacity m3/h 250) - Motorized carpet to evacuate wastes/chips 1st Y-axis)- 2 machining heads (upper) in 4 slots Slot 1 + Slot 2: N° 1 vertical HSK F63 electrospindle (13.2 kW) with C-axis (360°) and air blowers Automatic tool change system (Tools storage plate in Y-axis / 6 positions) N° 16 (or 20) independent vertical drilling spindles + N° 6 (or 8) independent horizontal drilling spindles N° 1 Circular Saw (grooving) 120mm diameter (on the X-axis) Pedpfjzxnphsx Af Sjrb Slot 11 + Slot 12: N° 1 vertical spindle HSK F63 (13.2 kW) with C-axis (360°) and air blowers Automatic tool change system (Tools storage plate in Y-axis / 6 positions) N° 16 (or 20) independent vertical drilling spindles + N° 6 (or 8) independent horizontal drilling spindles N° 1 Circular Saw (grooving) 120mm diameter (on the X-axis) 2nd Y-axis - Edge Banding Unit - GU60C Glueing Unit (Hot Melt EVA glue) / Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (for 2+2 = 4 reels) 200312) automated panels loading +unloading, using a KUKA robot (moving along the X-axis)

Condition: used, Year of construction: 2011, Colour: White Empty weight: 3.000 kg - Year: 2011 - Documentation available: No - CE certificate present: No Pjdezy Nb Ijpfx Af Serb - Serial number: 56604 - Drilling unit present: Yes - Saw unit present: Yes - Vacuum pump present: Yes - Tools included: Yes - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Podpfeuqw E Njx Af Sjrb Working range Y 2,260 mm Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete Extra The machine has a MULTIFUNCTION UNIT EQUIPPED with a drilling unit with four tool outputs. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER25 recordings, speed 5,000 rpm. Pedpfx Aezp Hbqef Ssrb (If this drilling unit is also to be used for sloping frames, only two exits (opposite each other) are used). The machine also has a MULTIFUNCTION UNIT EQUIPPED with a mortising unit with two tool outlets. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER32 recordings, speed 16,000 rpm. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Prsdjycvcxspfx Af Sjb

Condition: ready for operation (used), Year of construction: 2021, total width: 5,851 mm, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 245 mm, overall weight: 3,000 kg, controller manufacturer: BIESSE, controller model: HH660 PC-based control, spindle motor power: 13,200 W, product length (max.): 7,116 mm, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details. • Power supply voltage 400 VAC • Full load current 31.7 A • Number of power supply phases 3 • Installed power 18.66 kW • Frequency 50 Hz • Short circuit protection rating 10 kA RMS Sym • Working area X 3140 mm • Working area Y 1260 mm • Working area Z 245 mm • Max panel thickness: depends on vacuum module height (H74 / H29) and tooling • Workpiece support length 1200 mm • Vacuum pump capacity 90 m³/h • Vacuum pump capacity 108 m³/h at 60 Hz • Vacuum system dry pump • Electrospindle power 13.2 kW • Electrospindle speed 12000 to 15000 rpm S1 • Electrospindle speed 12000 to 24000 rpm programmable • Tool holder HSK F63 • Rotation clockwise and counterclockwise • Two separate magazines installed: • 8-position tool magazine (rear / Y-axis area) • 13-position tool magazine (main X-axis unit) • Maximum tool diameter 113 mm • Maximum tool length 110 mm Pjdpfxozugwps Af Serb • Maximum tool weight 7.5 kg • Maximum total magazine weight 32 kg • Vacuum system:Configurable vacuum pump system. Available configurations include:– 2 × 90 m³/h– 2 × 100 m³/h– 1 × 250 m³/h

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 5-Axis Machining Center Biesse C9.50 - Beam table – Material can be clamped with suction cups or hold-down clamps Dual tool magazine configuration – highly flexible for production Podpoyl Uuxsfx Af Sjrb Top magazine – Revolver type Bottom magazine – Chain carousel (additional saw blade for HSK mounting – spindle) 8 beam tables, supports 16 kW spindle Very large aggregate/saw unit Becker pump Year of manufacture: 2009

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Working area X: 6,400 mm Working area Y: 1,500 mm Number of milling spindles: 1 Main motor: 13 kW Maximum rotation speed: 24,000 rpm Tool clamping system: HSK-F63 Pedowlcqvopfx Af Sjrb Tool change positions: 8 Vertical drilling heads: 20 Horizontal drilling units X: 4 Horizontal drilling units Y: 4 2 vacuum pumps, each 360 m³/h Nesting Remote control Software: BIESSE WORKS Overall dimensions: 11,004 × 5,334 mm Weight: 4,900 kg

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Podpfoy U Naiex Af Sjrb Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland