Used Beveler for sale (512)

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Rsdpfx Adsyfnicjajn

Condition: ready for operation (used), Year of construction: 2015, This VOORTMAN V304 was manufactured in 2015. A robust plasma cutting machine, it's ideal for precision cutting tasks. Consider the opportunity to buy this VOORTMAN V304 plasma cutting machine. Contact us for further details. Machine Benefits Qualitative Machine Benefits • The plasma 3d bevel unit has a maximum acceleration of 2000 mm/s² on the z-axis, a maximum speed of 365 mm/s on the z-axis, a bevel angle of ±50° depending on the torch type, a positioning accuracy of ±0. 5°, and supports material thicknesses of 6–50 mm. • The oxy-fuel cutting unit is a nozzle mix type with a magnetic valve and backfire protection for gas supply, automatic external ignition, a maximum thickness of 200 mm for 1 or 2 pieces, 125 mm for 3 pieces, 100 mm for 4 pieces, 75 mm for 5 pieces, and 60 mm for 6 pieces, using acetylene gas as standard, propane as an optional gas, and o₂ as the cutting gas. • The voortman height control has a maximum acceleration of 2000 mm/s² on the z-axis and a maximum speed of 365 mm/s on the z-axis. • Voltage stabilizer: not included • Ambient temperature: 0–35°c, max. 95% relative humidity • Working height: 705 mm (±20 mm) • Working height: 705 mm (±20 mm) Technical Machine Benefits • Power per servo drive: 26 kw • Acceleration: 1000 mm/s² • Maximum pierce capacity: 40 mm • Dross-free cutting (maximum): 35 mm • Marking lines: yes, with the same consumables • Plasma gas (mild steel): cutting: o₂ (999% pure, clean, dry, oil-free); marking: argon gas or o₂/air (999% pure, clean, dry, oil-free) • Shield gas (mild steel): yes Rodox D I S Hjpfx Adajn • Automatic gas console: yes • Cutting speed for mild steel is approximately 3700 mm/min at 90a for 6 mm, 3600 mm/min at 200a for 12 mm, 1600 mm/min at 300a for 25 mm, 720 mm/min at 300a for 40 mm, 400 mm/min at 300a for 50 mm, and 100 mm/min at 300a for 80 mm • Grounding: maximum 6 m of the machine. Ac power, pe, and service grounds must comply with local and national codes. Extra Information Machine still under power

Condition: new, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, 70 mm thick wooden floor, 20 lashing eyes, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear bevel, laterally adjustable loading ramps, ramps with spring lift system, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, incl. axle load indicators, 450 mm drop sides. -- Subject to misprints, errors, and changes. Sample pictures. -- More data at: !, More details: ! Rjdpfxeydkwmj Adaon

Condition: excellent (used), Year of construction: 2009, Machine-Details: Stock-No. 1022-2352 Type of machine Gear Hobbing Machine - Horizontal Make MONNIER & ZAHNER Type KOEPFER MZ 120 Year of manufacture 2009 Type of control CNC Storage location Monheim (Germany) Country of origin Switzerland Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, Rjdpfoydc Haex Adajn worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: good (used), Year of construction: 2018, MACHINE STRUCTURE 2500X12000mm HEXA GV500 NUMERICAL CONTROL HEIGHT CONTROL PLASMA BEVEL HEAD 6-TOOL REVOLVER ISO30 DRILLING MACHINE INCLUDED: HYPERTHERM 400A GENERATOR NEW Redpsq Abwpjfx Adajn WARRANTY 6 MONTHS

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Rsdoxfh Tmspfx Adasn Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,000 mm, - CNC control Heidenhain TNC 415B - controlled 2-axes NC-milling head 2,5° - coolant device The machine will be sold without the plate field Accessories: ca. 20 pieces tool tapers DIN 2080 with bolts DIN 69872 some spare parts like bevel gears for the milling head and ball screw for X-axis. Technische Daten / technical details: Redpfx Aowrzkzjdajn Verfahrweg X längs / X-travel longitudinal 10000 mm Verfahrweg Y quer / Y-travel cross 1500 mm Verfahrweg Z vertikal / Z-travel vertical 3000 mm Werkzeugschaft / spindle taper SK50 Drehzahlbereich (2-stufig) / spindle speed (2-steps) 35-3000 UpM /rpm Vorschub / infeed 6-10000 mm/min Eilgang X,Y,Z / rapid feed X,Y,Z 10, 15, 10 m/min Antriebsleistung Hauptmotor 100%ED / drive capacity main motor 100%ED 37 kW Gewicht der Maschine ca. / weight 39300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: like new (used), Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: WLD-MODEL-SIZE, type of input current: AC, total height: 3,000 mm, total width: 3,000 mm, total length: 2,000 mm, input voltage: 240 V, overall weight: 8,000 kg, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, warranty duration: 12 months, type of cooling: water, continuous power: 22 kW (29.91 HP), Weld overlay cladding is an advanced welding process which provides an anti-corrosion or wear resistant surface on a less corrosion or wear-resistant base metals. A prime example involves the deposition of a stainless steel or nickel-based alloy layer onto a carbon steel base material, thus not only giving it corrosion resistance but also lower cost compared to the use of a monolithic stainless steel or nickel alloy components (stainless Rjdpfoyaw Ecjx Adaen steel or nickel-based alloy). With our advanced equipment and software, EQ Automation is able to deliver our customers a total weld overlay cladding solution that will give our customers better productivity and lifespan of their equipment. Welding Machine Sets: Robotic Welding, Quality Welding Consumables, Wires, Rods available!! Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters up to 3.0meters, vertical & horizontal Pre-Set Programmable, easy operation control panel. Friendly interface. Overlay welding for Balls, Valves, Flange faces, RTJ groove, Bevel etc. One touch, More Welding Solutions, Stocks for sale!!

Condition: excellent (used), The Formid Limited is a roll forming line with an electrically extendable support system for forming sets up to 800 mm. The drive is manual via a bevel gearbox. It can be combined into a single electric system and measures the width of the spacing. Mounted on 45 mm shafts, 12 keyways, shaft distance 145 mm. Axle spacing 250 mm. Shaft spacing minimum 200 mm from each other and 800 mm apart. Powered by a 380-volt electric motor with 15 kW. The system is suitable for profiles with frequently varying center widths. It features center roller supports to maintain the lower layer of the steel strip, which in turn supports the base strip substrate in a defined profile. The system also includes 16 stations. Rodpfewxv Izsx Adajn

Condition: excellent (used), Year of construction: 2003, max. wheel diameter 600 mm gear width 700 mm max. module 20 min. module 0,5 table diameter 300 mm x-travel 300 mm y-travel 600 mm z-travel 700 mm workpiece weight 300 kg Control Zeiss max. workpiece diameter 600 mm clamping length 20 - 1000 mm ical angle 90 ° total power requirement 2 kW weight of the machine ca. 2,5 t Rjdpfx Adowyxyceajn dimensions of the machine ca. 3,0 x 2,0 x 2,4 m Form measuring machine,gear measuring machine,coordinate measuring machine --> Primar MX 4 WL Suitable for transmission shafts, pinion shafts, gears, pistons, gearboxes, connecting rods, camshafts and crankshafts, crankcases, cylinder heads,... Air-suspended, centering and tilting table, support bearings, high-precision design! Software: Gear, hob, piston, bevel gear, crankshaft, tapered mandrel, drive bevel gear, connecting rod,... New software update 2014!

Condition: used, Year of construction: 2021, Suitable for fully automatic grinding or re-toothing and beveling of HSS and segment circular saw blades as well as solid carbide circular saw blades, cutting saw blades/thin-cutting saws with chip breaker (diameter of 200-500 mm, tooth pitch of 8-30 mm), using deep grinding techniques with CBN or diamond grinding wheels. Accessories: Total enclosure, Prepared for later installation of a device for grinding chip grooves, Automatic central lubrication, Automatic threading of the grinding wheel, including checking the diameter and tooth pitch, Device for fully automatic chamfering of regularly toothed saw blades (from Automatic sawblade holder movement to the entered saw blade diameter Programmes for all standard curved and pointed teeth, Circular grinding of sawblades to grind down the existing teeth Automatic switching of the peripheral speed between CBN and diamond grinding wheels Extinguishing generator Absolent extraction system Machine light 1 saw blade holder F1730, Coolant system with 300 l tank, Redoycu Itopfx Adaen Operating tools, Electricak cabinet chiller, Oil collection tray. saw diameter: ( 40 ) 130 – 850 mm Tooth pitch: 1 - 50 mm number of teeth: 2 - 998 saw blade thickness: max. 8 mm Grinding wheel diameter: 200 x 32 mm coolant pressure: approx. 6 bar Connected load: approx. 8,9 kW (400 V / 50 Hz) Weight: about 1260 kg Dimensions: L x W x H = 1250 x 1870 x 2250 mm colour: grey RAL 7045 / RAL 7047.

Condition: used, Year of construction: 2011, Suitable for fully automatic grinding, re-toothing, and beveling of HSS and segmented circular saw blades, as well as solid carbide circular saw blades, chamfering saw blades/thin-cutting saws with chip breakers (diameters from 200-500 mm, tooth pitch from 8-30 mm), using a deep grinding process with CBN or diamond grinding wheels. Accessories: Total enclosure Automatic central lubrication Integrated coolant system with coolant tank and pump Device for fully automatic chamfering of regularly toothed saw blades Programmes for all standard curved and pointed teeth CAD programme for designing your own tooth shapes and changing the speed sequences Automatic threading of the grinding wheel, including checking the saw blade diameter and tooth pitch Service software with error diagnosis display on the screen Automatic switching of the peripheral speed between CBN and diamond grinding wheels Grinding wheel thickness compensation, i.e. different tooth pitches can be ground with one grinding wheel Conversion kit for oil (pressure relief flap, electromechanical door lock, pressure monitor, etc.), Aerosol fire extinguishing system Oil drip tray Machine light Control cabinet cooling unit. Saw diameter: (40) 130 - 850 mm Tooth pitch: 1 - 55 mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200 x 32 mm Coolant pressure: approx. 6 bar Coolant tank: approx. 300 l Grinding motor: 3 kW Connected load: approx. 7.3 kW (400 V / 50 Hz) Weight: approx. 1600 kg Dimensions: L x W x H = 1250 x 1870 x 2250 mm colour: grey RAL 7045, RAL 7047. Rodpfx Aoycu Ersdasn

Year of construction: 2026, condition: new, functionality: fully functional, This robust professional cable stripping machine, model KM1-F, processes electrical cables with diameters ranging from 1 to 70 mm. This model features speed control via a frequency inverter. - The blades are hardened, ensuring they do not dull quickly when stripping armored cables. - The machine has 15 different cable feed entries. - The rollers feature grooves on their beveled surfaces for improved grip on the cables. - The cable is cut from both sides, allowing the copper core to be easily removed. - It is also suitable for stripping rubber and flat cables. - The machine meets all safety requirements. - A comprehensive service manual and user instructions are included. - Maintenance procedures are also detailed in the documentation. Rodpfjyfw Egex Adajn Technical specifications: - Power supply: 230 V ~ 50 Hz - Power: 2200 watts with geared drive - Dimensions: 60 cm long x 75 cm wide x 90 cm high - Machine speed: adjustable - Output: Depending on the cable type, between 400 and 1200 kg/day - Weight: 185 kg - Price includes VAT Spare parts such as blades, drives, bearings, etc., are also available. If desired, we can also perform maintenance on these machines. A machine that is ready for immediate use and easy to operate. If you would like to test it, please bring your own cable.

Condition: used, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Extendable Low Loader for Railcar Transport Approval Technical Data 1 Speed: 80km/h 65km/h Fifth-Wheel Load: 23,000kg 26,000kg Rear Axle Load: 10,000kg 11,000kg Total Weight: 83,000kg 92,000kg Payload: 52,500kg 61,500kg Unladen Weight (without accessories): 30,500kg Gooseneck: Length: 4,000mm Width: 2,480mm Construction Height: 235mm Fifth-Wheel Height: 1,350mm Front Underride Protection: 1,420mm Rear Underride Protection: 2,700mm King Pin: 3.5 inch Taper: Beveled 10 degrees Front Corners: Beveled 45 degrees Flooring: 50mm spruce Landing Legs: mechanical Width with sideboards: 2,550mm Hydraulic STZ gooseneck with externally mounted beams, hydraulically raisable and lowerable, with mechanical drop-leg supports and hydraulic support cylinders. Redpsyfvypsfx Adasn Hydromechanical forced steering (2-circuit steering system) in low-profile design (construction height 235mm) with adjustable guide elements and THP steering cylinders. Loading Platform: Type: Flatbed Adjustable Height: No Length: 13,000mm Width: 3,000mm Flooring: Steel/spruce 50mm Wheel Wells: No Wide Extensions: No Extendable: Single-stage telescopic First section length: 10,000mm Loading heights (loaded): Loading height 1: 815mm Telescopic loading platform, designed as a combination of outer and inner tube construction, with a fixed 1,070mm long front platform section. Integrated pin-eye coupling in the fixed platform section for connecting vessel bridge extension beams. The welded angle-section rails serve as a running track for rails with gauges of 1,000mm (rail distance 1,015mm) and 1,435mm (rail distance 1,450mm). Locking of the extension stages by spring-loaded cylinders and conical bushings. Platform height on the center tube (outer tube): approx. 815mm (+/- 130mm) Platform height on the embedded rail elements: approx. 790mm (+/- 130mm) Rear Undercarriage: Chassis type: Standard Loaded height: 815mm Width: 3,000mm Wheelbase: 1,360mm Flooring: Steel plate Wide extensions: No Wheel wells: No Excavator trough: No Axles: Number of axles: 6 Lift axle: see accessories Axle type: Offset stub axles Axle leveling: hydraulic Axle manufacturer: BPW/Eco Operating modes: 1 Axle lift (1) +/-: 130/130mm Axle lift (2) +/-: 0/0mm Raise/lower valve: Yes 1st axle pneumatically liftable with lift airbag Steering: Number of steered axles: 6 Steered axle arrangement: all steered Max. steering angle: 45° Steering type: Hydraulic, 2-circuit system Tyres: Size: 235/75 R 17.5 143/141 J Type: twin wheels Rim type: disc Rim centering: hub-centered Braking system code: According to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes With ABS delete: No Parking brake: Spring-actuated EBS: No ECAS: No Note: Brake calculation no.: GH 4324S Chassis remarks: Steering designed for extended condition with greater steering angle for the front axles Open wheel cutouts above the wheels with narrow transverse beams in between (ALU covers see below accessories) Control elements protected, located on the left in the direction of travel...

Condition: used, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Extendable Low Loader for Railcar Transport Approval Technical Data 1 Speed: 80km/h 65km/h Fifth-Wheel Load: 23,000kg 26,000kg Rear Axle Load: 10,000kg 11,000kg Total Weight: 83,000kg 92,000kg Payload: 52,500kg 61,500kg Unladen Weight (without accessories): 30,500kg Gooseneck: Length: 4,000mm Width: 2,480mm Construction Height: 235mm Fifth-Wheel Height: 1,350mm Front Underride Protection: 1,420mm Rear Underride Protection: 2,700mm King Pin: 3.5 inch Taper: Beveled 10 degrees Front Corners: Beveled 45 degrees Flooring: 50mm spruce Landing Legs: mechanical Width with sideboards: 2,550mm Hydraulic STZ gooseneck with externally mounted beams, hydraulically raisable and lowerable, with mechanical drop-leg supports and hydraulic support cylinders. Hydromechanical forced steering (2-circuit steering system) in low-profile design (construction height 235mm) with adjustable guide elements and THP steering cylinders. Loading Platform: Type: Flatbed Adjustable Height: No Length: 13,000mm Width: 3,000mm Flooring: Steel/spruce 50mm Wheel Wells: No Wide Extensions: No Extendable: Single-stage telescopic First section length: 10,000mm Loading heights (loaded): Loading height 1: 815mm Telescopic loading platform, designed as a combination of outer and inner tube construction, with a fixed 1,070mm long front platform section. Integrated pin-eye coupling in the fixed platform section for connecting vessel bridge extension beams. The welded angle-section rails serve as a running track for rails with gauges of 1,000mm (rail distance 1,015mm) and 1,435mm (rail distance 1,450mm). Locking of the extension stages by spring-loaded cylinders and conical bushings. Platform height on the center tube (outer tube): approx. 815mm (+/- 130mm) Platform height on the embedded rail elements: approx. 790mm (+/- 130mm) Rear Undercarriage: Chassis type: Standard Loaded height: 815mm Width: 3,000mm Wheelbase: 1,360mm Flooring: Steel plate Wide extensions: No Wheel wells: No Excavator trough: No Axles: Number of axles: 6 Lift axle: see accessories Axle type: Offset stub axles Axle leveling: hydraulic Axle manufacturer: BPW/Eco Operating modes: 1 Axle lift (1) +/-: 130/130mm Rodpfx Adoyfvf Ssasn Axle lift (2) +/-: 0/0mm Raise/lower valve: Yes 1st axle pneumatically liftable with lift airbag Steering: Number of steered axles: 6 Steered axle arrangement: all steered Max. steering angle: 45° Steering type: Hydraulic, 2-circuit system Tyres: Size: 235/75 R 17.5 143/141 J Type: twin wheels Rim type: disc Rim centering: hub-centered Braking system code: According to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes With ABS delete: No Parking brake: Spring-actuated EBS: No ECAS: No Note: Brake calculation no.: GH 4324S Chassis remarks: Steering designed for extended condition with greater steering angle for the front axles Open wheel cutouts above the wheels with narrow transverse beams in between (ALU covers see below accessories) Control elements protected, located on the left in the direction of travel...

Condition: good (used), Year of construction: 2005, Offer 24116 - Technical specifications: - Sheet thickness with spacer up to 160 mm - Standard bevel angles: 20°; 30°; 37.5°; 45° Redpfxoyfnq Ho Adajn - Bevel angle with special stripper: 55° - Max. bevel length, steel 400 N/mm²: 15 mm - Max. bevel length, steel 600 N/mm²: 9 mm - Max. bevel length, steel 800 N/mm²: 6 mm - Pipe processing from 30 mm inner diameter - Internal cut-outs from a diameter of 160 mm - Working speed approx. 1.5 m/min - Stroke rate approx. 250 1/min - Drive 400 V / 2000 Watts - Required space approx. W 550 x D 200 x H 300 mm - Weight approx. 19 kg - Wall mount included

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Rjdpfx Adevvkipjajn

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Rsdpeya Iqvefx Adaen

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Rsdpsya Iqijfx Adasn

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Rjdpfeyay H Aox Adasn Manufacturer: Microstep Model: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source incl. Optimix gas console 1 x drilling spindle 26 kW up to 40 mm diameter, incl. 8-position tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting software at the CNC control 20126 Availability: May 2026

Condition: new, Year of construction: 2026, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 5,500 kg, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! Rodpfx Aerh Iw Tedaen The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Condition: new, functionality: fully functional, machine/vehicle number: 01.1274197402.0001X08, power: 4 kW (5.44 HP), rotational speed (max.): 1,420 rpm, input frequency: 50 Hz, type of input current: AC, overall weight: 101 kg, protection type (IP code): IP54, Multiple available. Redpfx Aou Dkv Nodaon Operating mode: S1 (continuous operation) Voltage (V): 230 (rated voltage of the motor in delta operation) Current (A): 15.20 A Insulation class: F (higher temperature resistance of the insulation) Mounting form: IM M1AB Braking torque: 75 Nm The SEW-EURODRIVE K77 DV112M4/BMG/HR/TF/ASB8 gearmotor is a powerful and reliable drive solution that is ideal for demanding industrial applications. With a rated power of 5.5 kW and an operating voltage of 400 V, this motor offers high efficiency and excellent torque. The integrated bevel gear ensures a compact design and enables optimum power transmission, while the robust construction guarantees durability and reliability. This geared motor is particularly suitable for use in conveyor systems, mechanical engineering and automation technology where precision and performance are required.

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm Rjdpfx Adsrmulvoaen - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection ----- 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm N...

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Rjdpfx Aswka Ntsdajn Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: Machine with PLC control Feed speed: 12/16 m/min Edge feed for roll and strip material, automatic 1901 Glue application cartridge 1906 with sensing nozzle Pressure unit pneumatic, motorized adjustment to edge thickness 1926 End trimming unit, twin-motor, pneumatically tiltable 1918 Milling unit, fixed up to 30 mm 1962 Milling unit MOT 5 with multifunctional flush, radius, bevel 1966 Radius scraper 1927 Corner copying 1983 Surface scraper 1964 Buffing unit 1944 Air blow nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Redpfxsyamcwj Adasn Edging thickness max.: 13 mm Weight: 1,350 kg Machine dimensions: 5,850 x 1,000 x 1,750 mm Location: Röllbach Availability: short-term