Used Band Feed for sale (17,167)

Condition: used, Year of construction: 1991, Technical details: cutting diameter: 240 mm saw band length: 3000 mm saw band width: 20 x 0,8 mm cutting range 90 degrees: round: 240 mm band speed: 20; 35; 50; 70 m/min total power requirement: 1,8 kW machine weight approx.: 330 kg Fsdpfx Aju Nihuefnepb dimension machine xH: 1,9 x 1,1 x 1,1 m hydraulic operation clamping jaw size 150 x 100mm, manual clamping (hand wheel) 1 transport roller each before and after vice support incl. 4 pieces band saw blades incl. 2 pieces roller tables (2000 x 520 x 750mm and 1000 x 520 x 750mm) incl. limit 3000mm *

Condition: good (used), Year of construction: 2007, 1 used band saw manufactured by Bauer type SA 320 year 2007 Fodpfx Afsttbf Ronspb Technical data: Type Electrical connection 3 x 400 V / 50 Hz Motor power 3000 W Speed levels 2 Saw blade speeds 30- 120 m/min Saw blade dimensions 4150 x 34 x 1.1 mm Table height material feed 800 mm Cutting capacities Cutting capacity 0° round profile 320 mm Cutting capacity 0° round full 320 mm Cutting capacity 0° square material horizontal 320 x 320 mm Cutting capacity 0° square material upright Coolant pump

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, The USED MACHINE KASTO 260/400 U is a single miter band saw capable of cutting round material up to a diameter of 260 mm and square material up to 260 x 400 mm. Material is fed and clamped manually. The saw frame is raised hydraulically, while the cutting feed is performed automatically by a hydraulically controlled downfeed cylinder. Infinitely variable cutting speed via variator gearbox. Technical Data: • Cutting range: 90° round: 260 mm; rectangular: 260 x 400 mm 45° round: 260 mm; rectangular: 260 x 260 mm • Motor power Power supply approx. 3.2 kW / 400 V / 50 Hz Saw motor approx. 2.2 kW / 400 V / 50 Hz • Blade speed 18 to 110 m/min. (stepless) • Working height 835 mm • Minimum remnant piece length approx. 20 mm (90°) • Saw blade 4310 x 27 x 0.9 mm • Dimensions (in operation) 2410 x 1805 x 913 mm • Weight 920 kg Standard Equipment • Hydraulic control of the cast iron saw frame • Saw blade drive via variator • Stepless saw blade speed adjustment from 18 to 110 m/min • Saw frame height limit • Driven chip removal brush • Electric blade tension monitoring with blade breakage detection • Carbide saw blade guides and guide rollers • Cutting pressure regulation (solid material – tube) • Sturdy base with coolant tray Fpsdpfxex Sx D Eo Afneb • Bi-metal saw blade M 42

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Type: LZ 185 Swing diameter over bed: 365 mm, over cross slide: 225 mm Turning length: 750 mm Centre height: 185 mm Spindle bore: 40 mm Speed range: 20 – 1,600 rpm Digital display Heidenhain VRZ 773 B on 2 axes (scales on cross slide, longitudinal slide, and top slide) Dimensions: 1,900 x 900 x 1,700 mm Weight: approx. 800 kg Features: • Spindle brake operated by foot pedal • Adjustable stop on the cross slide (feed cut-off) • Splash guard Accessories included: - Operating manual Fodpfxsw Svtco Afnspb - Multifix B tool holder with 2 inserts - Coolant pump integrated in machine base (no coolant hose connected) - Forkardt 3-jaw wedge bar chuck 200 mm - Albrecht drill chuck 1-13 mm Total weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected under power. All information is given without guarantee and subject to error. All dimensions are approximate. This offer is non-binding. The machine can be inspected by appointment. Subject to technical changes, errors, and prior sale! All prices are net plus VAT. Payment by advance transfer including any shipping costs within 14 days after conclusion of contract. If payment in full is not received within this period, the seller reserves the right to cancel the contract. Sale only to businesses as defined by § 14 BGB. The machine is sold excluding any warranty for material defects. This exclusion does not apply to claims for damages from liability for material defects resulting from grossly negligent or intentional breach of duty by the seller or their agents, or in the event of injury to life, body, or health. Any remaining rights against third parties for material defect liability will be assigned to the buyer. Please understand that I cannot accept liability for compliance with any locally applicable and generally required safety regulations for the sold machine and its components. Compliance with such safety regulations is the sole responsibility of the final operator. All contracts concluded with me are subject exclusively to the law of the Federal Republic of Germany, excluding the UN Convention on Contracts for the International Sale of Goods. Place of jurisdiction agreed as Mannheim.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW Fsdjx Sw Upjpfx Afnepb 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: AU10665, saw band length: 6,100 mm, saw band width: 100 mm, total height: 2,200 mm, total length: 1,100 mm, total width: 1,700 mm, table height: 1,170 mm, The Stenner VHF 36 is a robust resaw bandsaw designed for vertical and angled cuts in wood processing. Renowned for its durability and precision, it features a tilting saw blade for mitre cuts. Technical specifications: Bandsaw wheel diameter: 915 mm Bandsaw blade length: 6,100 mm Bandsaw blade width: 100 mm Max. cutting height: 400 mm Cutting width to the right of the saw blade: 240 mm Fedpfx Asx Svzusfnopb Cutting width to the left of the saw blade: 270 mm Machine tilting range: 0° – 45° Feed speed: Infinitely variable from 0–60 m/min Saw motor: 22 kW Machine weight: 2,200 kg Table height: 1170 mm Saw wheels were overhauled in 01/2024 at a cost of approx. €12,000 – see PDF document. Ex works. Subject to prior sale.

Condition: used, Year of construction: 2019, functionality: fully functional, Main motor: 22 kW Feed motor with reducer: 0.75 kW Fpedjxyhz Tjpfx Afnsb Max. working width: 500 mm Max. edging thickness: 80 mm Min. edging thickness: 7 mm Min. board length: 800 mm Weight: approx. 1700 kg Infeed table: 3 m + 2 m Sliver separator, 2x sliver boxes Stepless feed, longitudinal pulling chain and upper pressure rollers, hydraulic pump, mechanical self-adjustment of upper pressure rollers according to board thickness, 2 saw heads movable independently or synchronously, 2 lasers for easier positioning of saw heads, electronic Unitronic control with Mebor software, various accessories (lath head, saw blades, ...) Dismantling must be carried out by the buyer, forklift available.

Condition: good (used), Year of construction: 1995, 1 used center lathe Make MCM Type TC 300 x 2000 Year of manufacture 1995 Technical specifications: Center height 300 mm Turning diameter 600 mm Center distance 3000 mm Bed width 400 mm Spindle bore 82 mm Spindle nose Spindle speeds (24) 9 - 1600 rpm Motor power 7.5 kW (option: 9.2 kW) Z-axis feed X-axis feed Metric thread Witworth thread Module thread Diametric pitch thread Fsdpfx Afevzllcjnopb Cross slide LxW 660 x 230 mm Cross slide stroke 340 mm Top slide LxW 350 x 150 mm Top slide stroke 150 mm Tailstock taper MK 5 Equipped with Three- and four-jaw chuck Multifix head with various inserts Chip tray Steady rest Technical specifications. Errors excepted. This machine comes from a company that exclusively processed plastic and is in excellent condition.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 6459105039, saw band length: 4,530 mm, saw band width: 34 mm, total height: 1,568 mm, total length: 1,755 mm, total width: 2,149 mm, cutting range round steel at 90°: 260 mm, table height: 700 mm, power: 5 kW (6.80 HP), saw blade length: 4,530 mm, empty load weight: 1,700 kg, Fully hydraulic production band saw for continuous operation, suitable for cutting materials ranging from easy to difficult to machine such as solid stock, tubes, and profiles. Modern, precise linear guides ensure high stability and maximum service life. A special feature of this machine is the dual bearing of the driven flywheel. This design provides ideal bearing alignment and thus optimal support for the driven flywheel. The standard KASTO Basic Control system allows for intuitive and efficient machine operation. Up to 98 jobs (length/quantity combinations) can be programmed. Once the set quantity is reached, the machine automatically shuts off. The material feed unit positions the material length with high precision via a ball screw. Fpjdex Sdyrepfx Afnob A frequency-controlled drive with bevel gears, jam protection, bandsaw breakage protection, and clamping force control are included as standard features. These ensure perfect operation for both single cuts and small to medium batch runs. KASTO’s universal hydraulics ensure optimal cutting results and long band saw blade life. Technical data: Saw capacity round [mm]: 260 Saw capacity square [mm]: 260 x 260 Saw capacity rectangular [mm]: 260 x 260 Maximum feed length [mm]: 750 with repeat function [mm]: 9,999 Shortest cut length [mm]: 6 Minimum cut diameter [mm]: 10 Remnant length: Semi-automatic operation [mm]: 15 Automatic operation [mm]: 100 Power: Saw motor power [kW]: 3 Total power [kW]: 5 Infinitely variable cutting speed [m/min]: 20–110 Saw blade: Saw blade dimensions [mm]: 4530 x 34 x 1.1 Dimensions and weights: Table height [mm]: 700 Length [mm]: 1,755 Width with chip conveyor [mm]: 2,475 Width without chip conveyor [mm]: 2,149 Height (saw frame bottom) [mm]: 1,568 Weight [kg]: 1,700

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, For sale is our GSW decoiler/abcoiler from our mechanical department in Hungary (Szügy). Model: MHM 2 / 1400. Year: 1999 (in very good condition). The decoiler is still integrated in the production line and can be inspected and demonstrated on site (Szügy, Hungary) at any time. We are happy to answer your questions regarding our machinery. Technical data available as PDF below. Fsdpfx Afjxy E Rfenspb

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Fpedpjxta Dyefx Afnob

Condition: used, Year of construction: 1997, saw band length: 4,150 mm, - Vertical bandsaw with double-sided mitre capability - Hydraulic feed through the cut - Hydraulic material clamping - Minimum quantity lubrication system - Digital mitre angle display ELGO Fpjdpex Saurefx Afnob - Including roller conveyor (partially driven) before and after the saw

Condition: good (used), For sale: Colchester Triumph 2500 lathe, fully functional and ready for operation. The lathe is equipped with a Fagor digital readout and has a coolant pump installed beneath the chip tray. Technical data: Center height: 167 mm, Distance between centers: 635 mm, Swing over bed: 330 mm, Swing over cross slide: 210 mm, Spindle bore: 40 mm, Drive power: 2.2 kW. The sale includes 15 tool holders, a live center, and machine feet. Loading is problematic. Fpsdpfxoxw N I Nj Afnsb

Condition: good (used), Year of construction: 2009, functionality: fully functional, 1 used automatic band saw Brand Amada Type HA 250 W Year of manufacture: 2009 Technical specifications: Cutting capacity: Round: 250 mm Square: 250 x 300 mm Max. bundle cut: 200 x 150 mm Fedpfev T Tglex Afnspb Saw blade dimensions: 34 x 1.1 x 3505 mm Blade speed, continuously variable: 24 - 90 m/min Table load: 1400 kg Working height: 700 mm Max. feed length per stroke: 370 mm Saw blade motor: 3.7 kW Hydraulics: 0.75 kW Coolant pump: 0.18 kW Hydraulic oil tank: 98 l Cutting fluid tank: 180 l Approx. weight: 1500 kg Features: - Automatic material feed - Coolant system - Emergency stop button

Condition: new, NEBES TM 275 Band Saw Machine - 400 v Three-phase NEW "CE" INDUCTION motor Cast iron structure Adjustable cutting angle from 0° to 60° All cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tensioning gauge Front controls and two cutting speeds Fodpfoh Nm Ncex Afnepb Deviator for exclusion of coolant pump Blade guide with carbide skids (H.M.) Round cut 0° 220 mm Square cut 0° 200 x 200 mm Flat Cut 0° 230 x 185 mm Round cut 45° 150 mm Square cut 45° 150x150 mm Flat Cut 45° 150x200 mm Round Cut 60° 90 mm Square Cut 60° 90x90 mm Flat Cut 60° 90x120 mm HP 1.3 Voltage 400 V Blade size 2450 x 27 x 0.90 mm Weight 265 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, For sale is our GSW feed unit / roller feeder from our mechanical department in Hungary (Szügy). Type: WV 65 / 80 Year: 2004 (very good condition). The feed unit / roller feeder is still installed in the line and can be inspected and demonstrated on site in Szügy, Hungary at any time. We are happy to answer your questions regarding our equipment. Technical data available as a PDF below. Fodpsxy E Uwefx Afnopb

Condition: new, Year of construction: 2026, Feed with uniform speed without loss of strength Metal gearbox with hardened gears Metal cover of the feed rollers Right - and left-hand rotation Fpsdpfx Ajcnxmzjfneb Powerful motor Durable PU feed rollers Tripod with an extended arm as standard Individual tilt and adjustable for horizontal and vertical use With counter Model VSA 48 L Item No. 5115500 Technical data maximum unloading 1050 mm Number 4 feed rollers Roll diameter 120 mm Roll width 60 mm Travel of the roll 25 mm 8-speed Circulator Speeds 2 / 4 / 5.5 / 6.7 / 11 / 13 / 16,5 / 33 m / min. Motor output 0,75 kW Connection 400 V / 50 Hz Weight 65 kg

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Fpodpswuqbbofx Afneb Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Fedpfx Aog S Ui Asfnopb

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Fpodpfjvk Sdkox Afnjb Work table dimensions: 495*356 mm Cutting speed: 650/400 m/min Flywheel diameter: 356 mm Max. cutting height: 200 mm Max. cutting width with stop: 321 mm Saw band length: 2562 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 550 watts/230 volts Weight: 80 kg Dimensions in mm: 610*445*1753 Extraction nozzle diameter: 100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: new, CNC automatic hydraulic sawing machine for cuts from 0° to 60° right, complying with all CE safety standards. The equipment has 9 programs, each of which consists of 99 steps, for a total of about 890 cutting positions with relative piece counter. Fpjdpsg Np Dxjfx Afnob Functioning: Material feed. Fixed vice closing. Blade rotation and dispensing of emulsifiable liquid. Arc descent until cutting is complete and return of the feeder carriage until the set size is reached. Arc return and stop blade rotation and coolant delivery. Fixed vice opening. Cycle repetition. Step by step advancement through ball screw. Numerical control of cutting quantity and length. Hydraulic unit with cutting pressure adjustment Blade tensioning obtained by manual rotation of the handwheel and guaranteed by electromechanical device. Brush cleaning device. Bimetallic belt 3010 x 27 x 0,9 mm. Hydraulic power pack motor 0.75 kW. Cutting thickness 1,2 mm. Material feeding stroke 600 mm. Electric pump 0.09 kW.

Condition: new, Year of construction: 2026, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Fsdpfegd Si Esx Afnjpb Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: new, Used MACC SPECIAL 411 CSO Gravity descent bandsaw New CE The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides, band tensioning) have been carefully studied to avoid the yielding of the band, increase its duration, improve linearity and cutting time. - Sawing machine with cut by falling arc regulated by a hydraulic circuit, manual bar feeding and vice closing, manual head return. - Vertical rotation on pivot with adjustable conical bearings without backlash - Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw - Appropriately sized flywheels - Sturdy belt guides made of watertight bearings and adjustable widia plates - Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control - Vice with rapid approach device - Accident prevention safety device on the flywheel cover, on the control knob and on the blade - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable stop for cuts of the same size - 24 V low voltage system Fjdpfxsficb To Afnepb - 0.06 kW electric pump for belt cooling - Pedestal with drawer for chips collection and extractable tank for the cooling liquid - Machine predisposed

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Fpodsvk Sd Depfx Afnob Technical data: Work table dimensions: 610 * 431 mm Cutting speed: 900/450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with stop: 370 mm without stop: 410 mm Saw band length: 3345 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 1550 watts/400 volts Weight: 130 kg Dimensions in mm: 680*512*2048 Extraction nozzle diameter: 2*100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 533 S. Heavy professional design with high dead weight for maximum running smoothness especially smooth and precise running thanks to torsion-free machine housing large dimensioned cast iron saw table in one piece, tiltable from 0° to +20° with ground and polished surface patented table tilting device with hand wheel and toothed rack saw band quick clamping ceramic saw band roller guide large cast iron parallel fence fast and precise cutting height adjustment via handwheel and toothed rack with millimetre scale safety switch for automatic shut-off when opening the door large cast iron parallel fence standard with angle stop flywheels made of grey cast iron with special coating on the running surfaces Inspection window for checking the saw blade running Professional saw table guide the heavy, massive saw table made of grey table is easily and comfortably adjusted by a handwheel rack and pinion guide system the inclination is steplessly adjustable from 0° to +20°. Patented working table dimensions 750 x 530 mm cutting speed 1400 m/min. Fpsdpeb S Uzkefx Afnob flywheel Ø 530 mm max. cutting height 350 mm max. cutting width with fence 465 mm max. cutting width without fence 510 mm band saw blade length 4190 mm precision guide top / bottom saw table inclination 0° - +45° motor power 400 V/50 Hz/P2 4,0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Suction port diameter 2 x 100 mm Location: ex stock Bitburg