Used Band Feed for sale (17,697)

Condition: excellent (used), Year of construction: 2022, operating hours: 2,500 h, functionality: fully functional, The sawmill is in very good technical condition and has 2,500 operating hours. - maximum cutting width: 1200 mm - maximum cutting length: 11,500 mm - main motor: 45 kW - side feeder: 5,500 mm - outfeed table: 5,500 mm Nledpfx Afexy Skforoi

Condition: good (used), Year of construction: 1995, 1 x Bandsaw Machine Meba 230 GAH Year of manufacture: 1996 with roller conveyor Technical data: Manual operation: Cutting range: Round material 220 mm, Flat material: 300 x 150 mm at 90° Njdpfjxy Si Iox Afrjli Manual operation: Cutting range: Round material 200 mm, Flat material: 200 x 200 mm at 45° Manual operation: Cutting range: Round material 120 mm, Flat material: 120 x 120 mm at 60° Automatic operation: Cutting range: Round material 220 mm, Flat material: 250 x 220 mm at 90° Automatic operation: Cutting range: Round material 200 mm, Flat material: 200 x 200 mm at 45° Cutting speed: 28 + 56 m/min Material feed: 1 - 500 mm The saw can be inspected under power.

Condition: used, cutting height (max.): 280 mm, MEP Shark 280 with micro spray unit chip drawer saw blade dimensions: 2950 x 27 x 0.9 mm maximum cutting capacity: 280 mm maximum vise opening: 280 mm vise height: 130 mm 2 cutting speeds swiveling cut from 0 to 60° automatic lowering manual vise clamping lubricant pump voltage: 380 V width: 900 mm depth: 1900 mm total height in raised position: 1900 mm weight: approx. 650 kg Nledpfx Aswza T Tefrsi

Condition: ready for operation (used), Year of construction: 2007, Available immediately ex site: Bandsaw Behringer Type HBP 310 – 523 G NC version Year of manufacture: 2007, last maintenance: 10/2025 Cutting range round: 10 – 310 mm Flat material: 10 x 8 to 520 x 300 mm Saw blade dimensions: 5,000 x 34 x 1.1 mm Infinitely variable cutting speed: 20 – 140 m/min Saw blade drive: 4 kW Roller conveyor infeed: 12,000 mm, outfeed: 12,100 mm, both hydraulically driven Chip conveyor Nedpfsxy N D Aex Afrsli Connected load: 12 kW Saw weight: 2 t, total system weight: 8 t Price: EUR 9,500 plus VAT, ex site

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Cast construction, doors with safety interlocking; coating of conveyor rollers in very good condition; outreach 500 mm; emergency stop (NOT-AUS); Nledpfx Aoxy Ngkofrsi

Condition: good (used), – Throat depth 900 mm Nledpfsxmllcsx Afrji – Tilting table – 2 speeds – Saw blade welding device – 380V

Year of construction: 2008, condition: excellent (used), Schüttelderdofen Vi301 Y.O.M. 2008 Nlodped Rxbzefx Afroi Salt quenching container GHS Y.O.M. 2008 Wash container LW Y.O.M. 2008 Wash machine Tras5+/21 LRS DES Y.O.M. 2008

Condition: used, incl. 3-roller feed incl. Aigner table extensions Storage location: Supplier Nledpjw N Sz Refx Afroi

Condition: used, Primultini cast iron band saw with 100 cm flywheel and tilting table, maximum useful board passage 90 cm. 10 HP motor power. Used. Nledpfstq Dl Tex Afroi

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, For sale is our GSW feed unit / roller feeder from our mechanical department in Hungary (Szügy). Type: WV 65 / 80 Year: 2004 (very good condition). The feed unit / roller feeder is still installed in the line and can be inspected and demonstrated on site in Szügy, Hungary at any time. We are happy to answer your questions regarding our equipment. Technical data available as a PDF below. Nsdpfx Ajxy E Uwofroli

Condition: good (used), Year of construction: 2012, functionality: fully functional, Kasto Functional U Metal Band Saw Manufacturer: Kasto Model: Functional U Year of Manufacture: 2012 Condition: Used, workshop-inspected Standard equipment: - Cutting speed: 20 – 110 m/min - Continuously adjustable mitre device (-45° to +60°) - Cutting capacities: - 90° round: 260 mm - 90° flat (W x H): 300 x 260 mm - 90° square: 260 x 260 mm - +45° round: 200 mm - +45° flat (W x H): 200 x 240 mm - +45° square: 200 x 200 mm - +60° round: 165 mm - +60° flat (W x H): 160 x 120 mm - +60° square: 150 x 150 mm - -45° round: 200 mm - -45° flat (W x H): 200 x 240 mm - -45° square: 200 x 200 mm - Weight: 510 kg - Saw blade dimensions: 2910 x 27 x 0.9 mm - Saw blade guides: Carbide, replaceable - Material clamping: Mechanical - Cutting feed: Hydraulic - Saw blade tension: Mechanical - Saw blade cleaning: By means of a driven, easily replaceable wire brush Scope of delivery: - Operating manual - Roller conveyor, 2 x 1 m Nlsdpfoxxl Hksx Afrei - Coolant system - Chip brush Machine is powered on. Video available.

Condition: excellent (used), Year of construction: 2008, Coil decoiler Max. load capacity: 2,000 kg Suitable for coil inner diameters: 370 - 630 mm Max. coil outer diameter: — Max. coil width: 500 mm Drive power: 4 hp Induction loop control Brake Infinitely variable unwinding speed Weight: 500 kg Nljdpfx Afexxlcxerji

Condition: as good as new (ex-display), Year of construction: 2024, Universal machines for a Nljdpfx Ajxyy Dmjfrsi wide range of applications Reliable and robust band sawing machines, machines for a long service life

Year of construction: 1988, condition: good (used), machine/vehicle number: 388236, Part number MA1160 Manufacturer Behringer Type HBP 220 A Year of manufacture 1988 Machine-No. Nedpfx Aslkdd Hsfrsli 388236 Length [mm] 1500 Width [mm] 2400 Height [mm] 800 Weight [kg] 1500 Connected load [mm] 380 Working range [mm] Round 220 Automatic feed YES Gear [rpm] 20-140 Saw blade diameter 3720 X 32 x 1,1mm Cutting area 350 X 220mm

Condition: repair required (used), Blade width (mm): 41 Blade length (mm): 5600 Blade thickness (mm): 1.3 Additional information: Manufacturer: Pehaka Model: PEHAKAMAT 360 ZP Working capacity: Nledpfx Aoxlab Nsfroi 90° round: 360 mm 90° square: 360 x 360 mm Note: There is some issue with the automatic feed, otherwise the machine is functioning well.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, For sale is our GSW decoiler/abcoiler from our mechanical department in Hungary (Szügy). Model: MHM 2 / 1400. Year: 1999 (in very good condition). The decoiler is still integrated in the production line and can be inspected and demonstrated on site (Szügy, Hungary) at any time. We are happy to answer your questions regarding our machinery. Technical data available as PDF below. Nljdpfoxy E Rfsx Afrsi

Year of construction: 2023, condition: new, The workline 510.350 DGH is a semi-automatic double mitre bandsaw in swivel frame design. Equipment details: - Double mitre 30° - 45° - 90° - 45° - 30°. - Hydraulic full stroke vice - Infinitely variable saw band speed - Infinitely adjustable saw feed and cutting pressure - Automatic cutting pressure regulation - Precision carbide saw band guides - Powerful drive motor with 3kW - Simple, easy to understand control system - Control panel in ergonomic position - Large dimensioned hydraulic unit - Machine designed according to current CE standards and safety guidelines inclusive: - Microspraying device Nledpfxehg Nvye Afrei - Hydraulic belt tension indicator

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 232597, - Operating voltage: 400 V - Guide rod (hydraulic stroke): 200 mm - Belt tension (hydraulic stroke): 60 mm Saw parameters: - Belt speed: 250 - 2000 m/min Equipment: Nljdpfx Afjv Irpzoroi - Incl. roller conveyor - Roller conveyor width: 350 mm

Condition: as good as new (ex-display), Year of construction: 2024, saw band length: 2,950 mm, saw band width: 27 mm, type of input current: DC, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, cutting height (max.): 285 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Njdpfoxyywmox Afrsli Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: good (used), WEILER DA 260x1000 Gap Bed & Leadscrew Lathe - 3-axis digital readout (new) - Centre height: 260 mm - Swing over bed: 535 mm - Swing over cross slide: 345 mm - Distance between centres: 1000 mm - Spindle bore: 71 mm - Speed range: 33 - 1500 rpm - Automatic longitudinal and cross feeds - Thread cutting: metric / inch / diametral etc. - Tailstock: MT 4 - Motor power: 7.5 kW - Chuck nut (new) - Multifix toolpost base with insert - 3-jaw chuck: 350 mm - 2x emergency stop - Electric chuck guard (new) - Chip guard (rear) - Coolant system - Drill chuck / live centre - Documentation Nlodpfsxyugcex Afrsi Dimensions (LxWxH): 2.7 x 1.5 x 1.7 meters / weight: 1700 kg Errors and omissions excepted.

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground Nledsd Ab H Njpfx Afrei - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Shaft diameter: 60Upper Roll Diameter: 215Bottom Roll Diameter: 215high performance hydraulic: 16working speed: 4motor power: 1,5length: 1000width: 1400heigth: 1650weight approx.: 950 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7 Nodpfsd Ab H Rex Afrjli         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Shaft diameter: 580working speed: 3-6motor power: 30length: 2760width: 2310heigth: 2680weight approx.: 14400 Technical specifications: Welded steel construction frame 3 rollers are driven Hardened and ground shafts made of high-strength special steel Rollers are hardened and ground Horizontal and vertical working position Hardened standard rollers Mobile control panel Angular side guide rollers Brake motor equipped for precision bending Digital displays (2 pieces) Options: Njdpjh Alh Hefx Afreli Digital display STANDARD NC unit 10 screen EURO 11,500.00

Condition: new, Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450 Technical specifications: - Steel frame - Two bottom rolls are powered - Direct drive power system with gears - Top roll is idle ( free turning ) - Hardened rolls - Rolls shafts are special steel material hardened and ground - Double speed motor - Standard rolls Nlodpfjd Eqq Aex Afroi - Adjustable guide rolls - Horizontal and vertical working position Options: - digital display EURO 858, -- Angular side guide rollers EURO 1,287, -- Double speed STANDARD Brake motor EURO 150, --                                                                                                                                                                                                                                                                                                                                                                                                                PK 30 file TypeSizeMin. DiaNotes150x10        20x61800        300Standard Rolls280x15        30x6700        400Standard Rolls330x30        10x10900        200Standard Rolls4Ø 30        Ø 10900        200Optional Rolls5Ø 60x1,5        Ø 25x1,51000        600Optional Rolls61 1/2”x2,9        1/4”x1,8600        300Optional Rolls750x30x3        40x20x21200        800Optional Rolls840x3        30x21200        800Optional Rolls940x40x5        30x30x4600        300Optional Rolls1035x35x5        30x30x4600        400Optional Rolls1150x6        20x3600        400Standard Rolls1250x6        20x3600        400Standard Rolls1350x6        20x3600        400Standard Rolls         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment        •Capacities are given for 260 N/mm² plate yielding strength       

Condition: new, angle iron / side length: 60 x 60 x 6double T-iron over x-axis: UPN 80 UNP 30U-iron over x-axis: UPN 65 UPN 30total power requirements: 3weight approx.: 1,4messurements (LxWxH): 1200 x 1100 x 800 Nljdpfx Aed Acazefrji