Used Band Resaw for sale (4,301)

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. Kdsdpfjzxrtqox Ahbju The machine is particularly suitable for cutting and resawing boards and planks and features stepless feed and cutting depth control. Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Stepless feed Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm length × 600 mm diameter Equipment: Resawing device for cutting boards and planks programmable cutting depth control ELGO Electric Type 87P pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm heavy-duty industrial design Condition and scope of supply as shown in the photos Important note regarding the control system: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site, but would be available shortly! Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Subject to errors, prior sale and changes. All information without guarantee.

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors Ksdodibw Aopfx Ahbodu work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Kdodpfxodcd Dle Ahbsu Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: good (used), Horizontal resaw, capacity 600mm wide x 150mm thick. In good working condition. Machine dismantled and loaded on truck. Can be seen running. Contact by telephone in French, or by email in your language. Kjdpfjxb D D Hox Ahbedu

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a professional, heavy-duty band resaw (slitting saw) from the renowned Italian manufacturer CENTAURO S.p.A., model SUPERCUT 80. The machine was manufactured in 2014 and comes from a line of technologically advanced saws designed for extremely precise cutting of wood into thin strips and veneers. Thanks to its robust construction and high frame rigidity, it guarantees perfect cutting geometry while maintaining high performance. Kjdpfxezti T Ro Ahbodu Full technical specifications (from the nameplate): Manufacturer: CENTAURO S.p.A. (Italy) Model: SUPERCUT 80 Year of manufacture: 2014 Main motor power: 15 kW (approx. 20 HP) – ensures stable operation even with hard exotic wood species and oak. Wheel speed: 680 rpm Diameter of cast iron wheels: 800 mm Certificate: CE (full documentation and compliance with safety standards)

Condition: new, Year of construction: 2025, Diameter of saw wheels mm 800 Max. cutting height mm 400 Kdsdpfx Ahsglfv Djbju Stationary working table mm 1290 x 800 Max. blade width mm 54 x 0,9 Max. and min. blade length mm 5530 / 5380 Motor power Kw 15 (HP 20) Sawdust hoods nr Nr. 2 Ø 120 Nr. 1 Ø 100 Compressed air consumption (wheels braking and feeder opening) bar 6 Net weight Kg 880 Feeder Height of feeding carpet mm 300 Length of carpet fence mm 750 Idle rollers dia. mm 160 Max. rollers-blade clearance mm 200 Max. fence-blade clearance mm 200 Variable feed speed rate mt/min 0-30

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 15 kW (20.39 HP), total height: 2,300 mm, total length: 1,500 mm, total width: 900 mm, overall weight: 1,500 kg, table height: 955 mm, Equipment: CE marking, documentation/manual, motor brake, Vertical band saw / resaw Manufacturer: Stenner Type: ST 9 Heavy-duty vertical band saw for resawing and trimming of squared timber, planks, and boards Typical applications: sawmill, timber trade, carpentry, pallet manufacturing, planing mill Saw blade and rollers: Diameter of saw blade rollers: 915 mm Saw blade width: 100 mm Minimum saw blade length: 5280 mm Maximum saw blade length: 5380 mm Cutting performance: Maximum wood width: 370 mm Maximum cutting width (standard): 230 mm Maximum distance from saw line to fence: 305 mm Fence swivels 0 – 35° Kodpfx Aoz Eigfshbjdu Drive and feed: Motor: 15 kW (optional equipment) Feed rate: variable, 7.5 – 30 m/min Dust extraction: Dust extraction port diameter: 150 mm Extraction volume: 1455 m³/h Dimensions and weight: Working height: 955 mm Dimensions (approx.): 1500 x 900 x 2300 mm (L x W x H) Machine weight (approx.): 1500 kg Basic concept: - Vertical band saw for resawing and trimming of solid wood - Fence swivels 0 – 35° for bevel and wedge cuts - Feed rate can be adjusted variably from 7.5 to 30 m/min - Saw blade rollers 915 mm, saw blade width up to 100 mm - Wood type: softwood / hardwood

Condition: used, Year of construction: 2009, For sale: Band-All BA32-102 Banding Tool The Band-All BA32-102 is a high-quality, durable banding tool designed for heavy-duty applications. It efficiently secures bundles with precision, offering ease of use and long-lasting performance. Perfect for industrial and commercial use, this tool ensures a tight and secure band every time. In excellent condition and ready for immediate use. Contact for more details or to arrange a viewing! Kodpfx Ajv Sq Hyehbedu More photos and full specifications: / For sale: Band-All BA32-102 Banding Tool

Condition: good (used), machine/vehicle number: Stenner Resaw Bandrack, functionality: fully functional, total height: 2,350 mm, total length: 5,410 mm, total width: 1,700 mm, table height: 1,100 mm, Equipment: motor brake, Good working condition and ready to use. Solid, reliable machine ideal for sawmill. Kdjdpszrpauefx Ahbou Please get in touch via my mobile, if you require any further information or would like to arrange a viewing. Can be seen working or please view it on the YouTube Link

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm Kdodpfsw H Rq Hjx Ahbou - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: new, Year of construction: 2026, A versatile saw for cutting wood for veneers, lamellas and the like. Height of workpieces up to 400 mm. The powerful feed rate gives a very high performance. The R800 is a solid saw. In the R800, it is possible to use tapes of different widths. It is equipped with a mechanical feed of the workpiece. It is designed so as to easily cope with work in conditions of high load of the main engine and high processing speed (up to 30 m / min). It is possible to use a tape with a width of 80mm. The sturdy frame of the machine is made of welded sheet steel. Massive flywheels made of cast iron ensure maximum efficiency, and the wheels are mounted on dustproof ball bearings. The lower part of the saw blade is specially reinforced, which allows a higher degree of inertia (inertia) to be achieved without excessive starting and braking loads. To further improve the evenness of work, the guides are specially ground so that they remain carefully balanced. Diameter of saw wheels 800 mm Max. cutting height 400 mm Max.cutting width 770 mm Height of table from 960 mm Table size 1060 x 800 mm Max. and min. blade length 5530/5380 mm Width of blade 80 x 0,8 mm Motor power 11 (HP 15) kW R.P.M. of wheels 680 R.P. M. Sawblade speed 28,5 mt./sec. Sawdust hoods 1 Ø 100 mm. 2 Ø 120 mm. Required capacity for extraction system (for air speed 20 mt./sec.) 3840 m3/h Compressed air consumption 60 Lt./min. Working pressure of pneumatic brake 6 - 8 bar Net weight 880 kg Kdsdpfxogp I U Nj Ahbeu RVP210 Height of feeding roller 50 mm Feeding roller diameter 200 nm Standard feeding rollers 2 nr. Height of standard rollers fence 300 mm Length of Rollers fence 600 mm Rollers fence tilt 0-45° Max. Roller-blade clearance 200 mt/sec Max. fence-blade clearance 420 mm Motor power 0,37 kW Variable feed speed rate 0-30 mt./min Compressed air consumption 30 Lt/min. Working pressure 3 - 6 bar Net weight 180 Kg

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Kjdpfx Ajyh Hc Rohbodu

Year of construction: 1970, operating hours: 10 h, condition: used, functionality: fully functional, We are offering this used belt dryer for sale. Category ID: 34 Type: Belt dryer I am selling my belt dryer. The belt dryer consists of 3 conveyor belts made of perforated stainless steel sheets. This makes it suitable for food products such as tea, herbs, corn, various types of crops, as well as pumpkin seeds and biomass such as wood chips, etc. The conveyor belts run smoothly, and a water-air heat exchanger is included. Height: 2.9m, Length: 8.5m, Width: 3.75m I had planned to operate the system with a wood chip heating system. Due to a project redesign, it is now available for sale. Ideal for farmers who want to process their raw products themselves. I can assist with the technical and practical implementation. Transportation is no problem. Kdsdpfxsz Nyvgj Ahbou Very robust construction, which will certainly provide reliable service for many years to come. Feel free to call if you have any questions. If you have any further questions or require more information, please send us a message or call us.

Condition: new, Technische Daten: Kjdpeby U Dpefx Ahbodu fly wheel DM 800 mm Max. cutting height 400 mm Max. max cutting width 780 mm tabel dimensions 580 x 810 mm tildable table 15 Grad Max. saw blade dimension 80 x 0,8 mm saw blade length 5380 - 5530 mm motor 11,0 kW, 400 V, 50 Hz suction 2 x 100 mm fly wheel speed 680 U/ min suction DM 1 x DM 100 mm & 2 x DM 120 mm compressed air 6 - 8 bar machine weight: ca. 850 kg machine dimensions L x B X H 1550 x 950 x 2500 mm welded steel structure, fully closed pneumatic brake table in cast iron upper & lower saw blade guide star triangle switch emergency push button telescopic saw blade guard/ guide work table tillable 20 deg. saw blade cooling/ cleaning device with diesel tank saw blade tension indicator cleaning brush for fly wheels solid work piece fence cast iron fly wheels motor circuit protection switch CE CENTAURO Model RVP200 feeder roller height 160 mm work piece fence with rollers height 160 mm var. feed speed 1 - 21 m/ min pneumatic opening / closing of feeder Max distance saw blade - feeder approx 220 mm Max. distance saw blade - work piece fenceapprox . 200 mm CE

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Saw band length: 4,700 mm Tool dimensions: 13 × 0.65 × 24 TPI Guide roller diameter: 630 mm Cutting height: 350 mm Cutting width without rip fence: approx. 610 mm Cutting width with rip fence: 150 mm Loading height: 1,065 mm Cutting speed: 10–100 m/min Table travel: approx. 600 mm Table feed rate: 0.03–0.3 m/min MACHINE DETAILS Dust extraction connection diameter: 1 × Ø 120 mm + 1 × Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1,725 m³/h Operating voltage: 400 V / 50 Hz Type of current: 3 × 400 V Kjdpfx Ahez Im Skjbedu Fuse rating: max. 16 A Minimum conductor cross-section: 1.5 mm² Motor power: 0.75 kW Dimensions & Weight Dimensions (L x W x H): approx. 1,850 x 1,200 x 2,300 mm Machine weight: approx. 550 kg

Year of construction: 2016, condition: excellent (used), This system was used to sort and convey small brushes. Kodpfxehit Rws Ahbodu It is in very good condition and has seen little use. There are two such systems available.

Condition: ready for operation (used), functionality: fully functional, cutting range round steel at 45°: 300 mm, saw band length: 3,660 mm, saw band width: 27 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Circular cutting capacity at 45°: 300 mm Circular cutting capacity: 300 mm Band saw blade length: 3,660 mm Band saw blade width: 27 mm Band saw blade thickness: 0.9 mm Band saw blade speed: 70 m/min MACHINE DETAILS Kdodpjz Niqyofx Ahbju Power: 1.8 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,100 x 1,600 mm Weight: 605 kg Transport packages: 1 unit EQUIPMENT Control: Conventional Saw type: Manual Saw direction: Horizontal Miter cut: Yes Workpiece clamping: Manual

Condition: good (used), Year of construction: 1991, Braun Canali band resaw TB 1100 Unimaster Roller diameter 1100mm With swivel table for diagonal cut Kdjdpsucnt Hjfx Ahbsu disassembled from our warehouse in 23936 Grevesmühlen

Condition: good (used), Artiglio ST 80 band resaw Kedpoucnt Tsfx Ahbsdu -technically tested and newly painted

Condition: good (used), Year of construction: 1964, number of straightening rollers: 17, roller diameter: 45 mm, straightening roller diameter: 45 mm, working width: 1,650 mm, Sheet width: 1650 mm Sheet thickness: 4 mm Kodpfj Aaya Ejx Ahbjdu Straightening roller diameter: 45 mm Support rollers: 140 pieces Straightening rollers: 17 pieces

Condition: good (used), Year of construction: 1981, machine/vehicle number: 24802, functionality: fully functional, Used band saw Ksde Aay Atjpfx Ahbedu Manufacturer: MÖSSNER Model: REKORD SSF /501 Year of manufacture: 1981

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,200 kg, Equipment: CE marking, documentation/manual, Kaltenbach bandsaw KBR 371 NA Ksdpfx Ahe Aavmzebjdu Chip conveyor Infeed side with roller conveyor, approx. 5 m Programmable material feed Saw band dimensions: 5920 mm x 41 mm Manual and CE marking available Further technical data can be found in the photo documentation Last used in a metalworking shop, not for mass production.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex works: Kjdpfx Aj Aa Iibohbedu Hydraulic horizontal band saw automation machine, Jaespa Type W 320 AZ – 6 Year of manufacture 1995 Cutting capacity: 320 mm round / 90 degrees Cutting capacity: 320 x 320 mm rectangular / 90 degrees Band speed, infinitely variable: 15 – 110 m/min Drive power: 4.9 kW Cutting lengths: 5 – 9999 mm Complete as shown in the picture, including all powered roller conveyors Weight: 2.2 tons Price: EUR 2,750.00 plus VAT, ex works

Condition: used, total height: 3,270 mm, total length: 2,700 mm, total width: 2,250 mm, Colour: Green Weight: 4.000 kg Price: On request - Serial number: U5624 - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1200 Ksdpfez Rz E Sex Ahbedu - Max. cutting to feed roller opening [mm]: 450 - Max. cutting to stop opening [mm]: 330 - Max. cutting height [mm]: 320 - Table width [mm]: 1000 - Table length [mm]: 1150 - Max. band saw width [mm]: 130 - Voltage [V]: 400 - Current consumption [A]: 46.5 - Fuse [A]: 63 - Power [kW]: 22.0 - Transport dimensions: 2700mm x 2250mm x 3270mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, control type: manual, total height: 1,400 mm, total length: 1,640 mm, total width: 750 mm, overall weight: 295 kg, table height: 900 mm, Equipment: CE marking, cooling unit, lighting, Technical specifications: Bevel cutting on two sides, Cutting speed: 40/80 m/min, Motor power: 0.9/1.4 kW; 400 V / 50 Hz, Machine dimensions (L x W x H): 1640 x 750 x 1400 mm, Machine weight: 295 kg, Saw blade dimensions: 2710 x 27 x 0.9 mm, Working height: 900 mm, Cutting range (90°): Ø 235 mm (300 x 200 mm), Main motor: 400 V, 50 Hz, 0.9/1.4 kW, Pump motor: 400 V, 50 Hz, 0.05 kW, Belt speed: 35/70 m/min, Vice working height: 900 mm, Coolant tank capacity: approx. 15 l. The saw is in very good technical condition and can be tested at our warehouse in Přerov. Kjdpfxez Tdcxj Ahbedu