Used Ballistic Seperator for sale (60)

Condition: new, empty load weight: 770 kg, maximum load weight: 2,230 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.8 m³, color: silver, construction height: 990 mm, working width: 1,860 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, incl. composite floor (ultra-reinforced honeycomb core floor) - extremely resilient and durable, * IMMEDIATELY AVAILABLE * incl. composite floor (ultra-reinforced honeycomb core floor) - extremely resilient and durable! Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available!!! - TÜV: 2 years - Floor: composite floor - Gross vehicle weight: 3,000 kg - Unladen weight: 770 kg - Payload: 2,230 kg - Interior dimensions: 335 x 180 x 30 cm (L x W x H) - Exterior dimensions: 468 x 186 x 99 cm (L x W x H) - Loading sill height: 69 cm - Tyres: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic 500 kg - Incl. Vehicle documents (letter) - 100 km/h: at extra charge Standard equipment: - New dropside hinges incl. very simple attachment option for a cargo net, among other things. - Anodized double-walled aluminium drop sides - All drop sides foldable all round - All drop sides removable - Sturdy welded steel frame - Frame completely hot-dip galvanized - Many sturdy cross members for high point loading - Additional longitudinal struts welded in throughout - 6 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV-certified - Lashing hooks on the frame - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy eccentric locks - Reinforced, V-drawbar - 13-pin plug - reversing lights Plug - Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Automatic center support wheel incl. Special equipment: - Parabolic suspension incl. shock absorber for 100 km/h fitted instead of rubber-sprung axles. - Parabolic spring axle with shock absorber for absolute driving comfort! - Composite floor (honeycomb core plastic floor) Composite is made up of various layers of these fibers, like a kind of lasagne. These two materials create a sustainable, extremely stable and lightweight board. The core of the composite floor consists of a honeycomb structure with a top layer on both sides. The whole is fused together to create a stable unit. The manufacturer of the composite panels comes from the anti-ballistic industry. The top layer is therefore constructed like that of a bulletproof vest. At HAPERT Aanhangwagens, all innovations are thoroughly tested. This naturally also applies to the new composite floor. It has been thoroughly tested by us under normal conditions of use for impact and tensile strength, shear force, wear and resistance to weather conditions, among other things. Take a look at the load test: ?v=_gpat0vbiTc Accessories optionally available: - Emergency hand pump mounted with electric operation (at extra charge) - Drive-on package: 2x aluminum drive-on rails integrated reinforced - 2 rotating crank supports reinforced version - Car2Trailer charging system (permanent charging of the battery in the tipper via towing vehicle) - High grille at the front, 70cm - Tarpaulin + bows in various heights, - Supports, grille, grids, bows in various heights, - Tiltable cover + bows in various heights, - Support, grille, bows, bows, bows, bows, bows. Supports, grids, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Bwjdsu Ht Nqopfx Ab Iok

Condition: new, Year of construction: 2024, neu 2024 2517 prompt, Zwischenverkauf v Deutschland 36720 € 701.35 € 1 1500x3000 mm Hypertherm Powermax 125 25 mm 25 mm 57 mm 25 mm 125 A Bwjdpfx Abowva Iaj Iok 24 m/min 1/10 mm 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) Height adjustment by arc voltage Set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTION: Suction bridge (prepared for suction diam. 160 mm)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25400 € 485.14 € 1250x2500 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.900,- € 28.400,- € 29.900,- € 32.800,- OPTIONS: water tank to quickly fill and drain thetrough € 2.870,- pneumatic marking pin € 770,- pneumatic engraver Bwodpewiryuefx Ab Isk € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm Bjdpfx Abjwiq Sco Iowk 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,000 mm, total length: 1,100 mm, total height: 550 mm, input voltage: 220 V, working width: 600 mm, infeed width: 650 mm, spindle motor power: 1,100 W, warranty duration: 24 months, power: 1.2 kW (1.63 HP), Equipment: CE marking, emergency stop, type plate available, DESTEK MAKİNE is the first and only company to establish a production facility in its field in Türkiye. All machines and hand tools we sell are produced in our own workshops using state-of-the-art CNC machinery from design to final product. With the strength we gain from production, we have been providing products and services to our valued customers in the standing seam roof & facade cladding sector for over 10 years. By conducting a thorough needs analysis with a customer-first approach, we bring all global technological innovations to our country simultaneously. Therefore, our vision can be summarized as: “ Whatever is Manufactured in the World, DESTEK MAKİNE can Produce the Same or Even Better ” With a solution-oriented engineering approach, an experienced team of experts in the field, and a reliable service network, we are here whenever you need us. Our company guarantees 100% customer satisfaction. Our commitment to quality is certified by: CE Conformity Certificate ISO 9001 ISO 14001 ISO 10002 ISO 45001 Every manufactured "DESTEK" standing seam machines goes through delicate tests. Bwedpfswzzlwox Ab Iok "DESTEK" Features - Standard standing seam height 25 mm - There is no problem of oil canning when working with the machine. - Automatic Cutting Guillotine (Standart) - Ribbing Attachments (Standart) - Dijital Counter (Standart) - Cabled Remote Controller (Standart) - Emergency Stop Button (Standart) - Forward and backward button (Standart) - Wrench Sets that will be required during use (Standart) - Weight: 260 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Material width adjusment (180 mm – 650 mm) (Standart) Please contact us for more information and prices.

Year of construction: 2025, operating hours: 550 h, condition: as good as new (ex-display), functionality: fully functional, Alzinger Lepton 5100 – Solution for the BioWaste Ordinance (BioAbfV) Ideal for biowaste separation: Effortlessly meet the statutory 1% limit! As of May 2025, biowaste may only be processed if the contaminant content is below 1.0% by weight. Our Lepton 5100 has been specifically designed for this requirement. Lepton 5100 Advantages: Separation Instead of Shredding Gentle Bag Opening: Waste bags are reliably opened without shredding. A pre-shredder (slow-speed shredder) is not required! Maximum Film Size: Films remain largely intact and are effectively separated during the first screening process, before they fragment in the compost windrow due to turning, heat, and UV light. Highest Purity: Prevents microplastics in the process and ensures final product quality. Cost-effectiveness: Regulatory Compliance: Reliably achieves the sub-1% contamination threshold per BioAbfV. Process Optimization: Reduced effort in downstream cleaning. Cost Efficiency: Significant savings on diesel and wear costs as no pre-shredder is required. Integrated Air Separator: No bulky additional machinery required, saving space and maintenance costs. Process Innovation (flexible control): Bwjdpfx Asycup Rsb Ijk Biowaste Processing (2-fraction): Reversible middlings conveyor combines medium and fine fractions for a homogenous result. Outcome: Clean target fraction for digestion/composting plus oversize fraction with films/contaminants. Compost Refinement (3-fraction): Separation into premium compost, structural material, and energy wood. The ballistic effect extracts stones, glass, and hard plastics via the stone fraction conveyor. Integrated air separators remove remaining film residues. Current Application: Successful biowaste processing for wet fermentation. The machine delivers a contaminant-free, homogenous fraction for the fermenter, preventing floating or sinking layers. Inspection & Demonstration: On-site demonstration possible while in operation at our partner facility in the Kelheim district. Processes can be discussed directly with the plant operator. Technical Data: Model: Lepton 5100 | Year of manufacture: 2025 | approx. 550 hours Location: D-84069 Schierling | Availability: short notice Screen decks: Deck 1 (52 mm), Deck 2 (43 mm) Features: Variable dosing roller, volume measurement, air separator preparation, compressor, LED package, radio remote control. Drive: Diesel-electric (Perkins 58 kW, no AdBlue) + option for external power supply (400V 63A). Transport dimensions: L: 11.97 m / H: 3.98 m / W: 2.53 m (No special permit required). Screening material: Compost, green waste, biomass, wood, municipal waste, RDF. Condition: Very good, immediately operational.

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm Bwsdpfxeu Idgco Ab Iok z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h operating hours - idle run: 49 845 h total power requirement: 20,6 kW Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit *

Condition: used, Year of construction: 2015, Used Buchi model B-290 glass mini spray dryer. Unit rated 1 kg/hour water evaporation capacity at 220°C maximum air inlet temperature. Heating capacity is 2300 W. Drying tower has inner diameter approximately 150 mm x 485 mm height of straight side. Includes nozzle, seperation flask, cyclone, filter. Bedpjx R Talsfx Ab Iswk

Condition: new, - incl. sideward drain Bwodpfod I Dqgox Ab Ijk - total volume of bowl 130 l - dimension approx. 1280 x 890 x 920 mm (h) - dim. of working trough approx. 1000 x 380 x 410 mm (h) - motor 1,1 kW - 380 V / 50 Hz - engine (rpm) 1500 - bottom P.U. layer of the trough 15 mm - side wall P.U. layer of the trough 10 mm - weight 300 kg - incl. dosing pump - incl. controlbox (speed control included, 1000 – 1500 rpm) - as option with noise isolation cover - as option with seperating walls

Condition: new, - incl. sideward drain - total volume of bowl 240 l - dimension approx. 1350 x 950 x 925 mm (h) - dim. of working trough approx. 1235 x 480 x 460 mm (h) - motor 1,5 kW - 380 V / 50 Hz - engine (rpm) 1500 - bottom P.U. layer of the trough 15 mm Bsdpfxed Nnuis Ab Iswk - side wall P.U. layer of the trough 12 mm - weight 500 kg - incl. dosing pump - incl. controlbox (speed control included, 1000 – 1500 rpm) - as option with noise isolation cover - as option with seperating walls

Condition: new, - incl. sideward drain Bjdpfod Nnupox Ab Ijwk - total volume of bowl 380 l - dimension approx. 1350 x 930 x 950 mm (h) - dim. of working trough approx. 1250 x 520 x 520 mm (h) - motor 1,5 kW - 380 V / 50 Hz - engine (rpm) 1500 - bottom P.U. layer of the trough 16 mm - side wall P.U. layer of the trough 12 mm - weight 750 kg - incl. dosing pump - incl. controlbox (speed control included, 1000 – 1500 rpm) - as option with noise isolation cover - as option with seperating walls

Condition: good (used), Year of construction: 1997, LAMEL MOULDER WEINIG HYDROMAT 22 BL Maximum working width : 220 x 140 mm Spindle diameter : 50 mm Bsdpfx Aoxa Hlkob Iowk Infeed : 30 Kw ( Separate Hydraulic station ) Seperate electric cabinet : L 2200 x W 600 x H 2000 mm 1. spindle : 5,5 Kw 2. 5,5 Kw 3. 7,5 Kw 4. 7,5 Kw 5. 7,5 Kw 6. 11 Kw 7. 15 Kw 8. 37 Kw 9. 7,5 Kw 10. 7,5 Kw Steel cage with gas pistons over machine. External pump for central lubrication( For 200 L lubrication oil barral ) 5 Europallets with spareparts/tools/extra spindles included

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Complete hydrogen pilot plant: electrical and automation systems for sale. The equipment is fully mounted and has been operational on-site. Mechanical parts also for sale in seperate ad. Bedpjxixtljfx Ab Iswk

Condition: refurbished (used), Year of construction: 2007, Looking to expand your existing Buhrs ITM (Winkler+Dunnebier) W+D envelope inserter with more feeders? We have all Buhrs ITM feeders available! The Buhrs / Winkler and Dunnebier AT25rotary and HF3 friction feeder are developed to be installed on the Buhrs-ITM BB300 envelope inserting systems The Buhrs / Winkler and Dunnebier HF2 friction and the RF2 vacuum rotary feeder are developed for the Buhrs-ITM BB600 and the Buhrs BB700 envelope inserting systems. The Buhrs RF2 vacuum rotary feeder can be retrofitted on most BB600 and all BB700 LL envelope inserting systems in the market The RF2 vacuum rotary will seperate the material with three suction cups and has bottom fed. This feeder is capable to feed material with high speeds. We have the following feeders available! AT25 Vakuum rotary feeder (BB300) AS25 Shuttle feeder (BB300) HF3 vakuum friction feeder (BB300) RF2 Servo vacuum rotary feeder (BB600 and BB700) AS2 Shuttle feeder (BB600 and BB700) Bjdpfxjq Ec Rgj Ab Ijwk HF2 Vacuum friction feeder (BB600 and BB700) All feeders we offer for sale are completely checked and tested. All parts which need to be replaced are new. We have multiple of the Buhrs ITM / Winkler & Dunnebier feeders available. Contact us for a quote.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Automatic Sheet Feeder A-20 (A-3): Mabeg Suction Head, Double Sheet Control Laminating Unit EK 104 (A-EK-3): Waterbased & Thermal Automatic Sheet Seperator TM-104 (TM-3) Seperating Unit: Quadruple Round Knife, Perforating Device Powder Spray Removal Device Automatic Stacker S-3 Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min Bsdporp D I Iefx Ab Iswk

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Bjdpsrp D Nljfx Ab Ijwk Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1420 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 70-100 m/min

Condition: good (used), Year of construction: 2000, Automatic Sheet Feeder Automatic Laminating Unit EK 130/180 Automatic BAT Sheet Seperator Automatic Stacker Bsdpsh H Dqhofx Ab Ijwk Max. Size : 1300 x 1800 mm Production Capacity Max : 50 m/min Technical data can vary according to job, consumables and possible other factors

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 20400 € 391.68 € 80 mm 245 mm Bwsdpfxswirvvj Ab Isk 3 4 kW 6 m/min 100x20 mm / 2000 mm; 80x2 125x25 mm / 600 mm; 60x5 45x45 mm / 500 mm; 15x15 Ø 50 mm / 500 mm; Ø 15 mm Ø 100x2,5 mm / 1.200 mm; 80x25x3 mm / 800 mm; 25x1 70x70x3 mm / 1.300 mm; 25 80x80x8 mm / 800 mm; 30x3 70x70x7 mm / 700 mm; 30x3 UPN 140 / 1600 mm; UPN 12 UPN 140 / 1.600 mm; UPN 1 IPN 120 / 600 mm; IPN 80 1450 mm 1000 mm 1400 mm 1700 kg 3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 210 REFERENCES!

Condition: used, ruhlamat QS-3 soft/BG1 / 888 213 65 / 2 seperating diverter - removed from Demag ET6EL EXIS S - removed from running machine Bwsdpfx Abjh Szl Ie Isk - fully functional - year of manufacture 2000 manufacturer: ruhlamat type: BG1 manufacturer no.: 2 sparepart no.: 888 213 65 Dition: gebraucht

Condition: good (used), total width: 375 mm, total length: 430 mm, total height: 95 mm, 2 magnetic Tables and 1 controll unit  Electropermanent magnetic clamping system Clamping all kind off jobs such as; Face milling, lateral drilling, Round bar facing and slots drilling Coupled parts machining ans forged parts machining Bsdswq Rutspfx Ab Iewk Edge milling and chamfering plates machining on right angle Flattening through drilling and pocket execution Seperate MCC Control box with quick connection Table Length: 430mm Table Width: 375mm Table Height: 95mm Number of poles:56 Length: 375mm Width: 430mm Height: 95mm Weight: 350kg

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Bodpfsrx Rxtsx Ab Ijwk Weight: 100000kg

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed Bwjdpfx Abjqprk To Isk - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Year of construction: 2017, condition: as good as new (ex-display), › ideal for all shirt fabrics (FX 1000) 1000mm belt › seperate feeding and transport belts, "cool feeding" › special insulation, little heat radiation › upper and lower heating individually controlled, with temperature limiters (1000 mm - 39 .37 inch long) Bwodpfxopfa Nhj Ab Ijk › seperate heating zones selectable, TOP (shirt), BOTTOM (outerwear) › special speed-heat up function, for fast heating of the machine › touch screen for program storage and service functions › optional air and compression cooling › failure diagnostic system

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm coil weight:ca, 6 t coil internal dia.:400 - 500 mm coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm Bwjdpfxeh Ra Spj Ab Ijk feed length:max. 10 m Feed speed:max. 75 m/min. diameter of the mandrel:360 - 420, 460 - 520 mm stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable.

Condition: used, machine/vehicle number: 2806-0743, x-travel:800 mm Bwedpfjcxxngsx Ab Iek y-travel:550 mm z-travel:500 mm table surface area:(B x T )1000x550 mm spindle turning speed - stepless:0 - 5000 U/min feed speeds - directly programable:2- 6000 mm/min rapid traverse:6,0 m/min quill stroke:80mm mm Tool bore:SK40 total power requirement:12 kW weight of the machine ca.:3,9 t dimensions of the machine ca.:(LxBxH) 2200x2800x2400 mmxmmxmm Deckel FP5 NC Universal Milling Machines - CNC - Swivelable left or right) 90 ° & Tilting Vertical Spilndle Head - Rigid Fixed Table: 1100 x 550 mm (Max. Load 450 kg) - High RPM on Both vertical and Horizontal Spindles - Powerful 9,0 kw AC drives for Main Spindle - Equipped with Electronic handwheel and handheld rapid travel attachement - Dialog 4 - 3D Path Control System. - Seperate Power cabin, Chip tray