Waterbased Laminating Machine

Billhöfer EK-HL-4

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Gedsuf Sy Aspfx Ab Dsit Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Year of construction: 2021, condition: new, Aluminum flat conveyor belt without substructure conveyor belt length: 4000mm drive roller: knurled deflection roller: crowned overturned Giedpfx Aohfwcbeb Dst Our core competence is to supply the customer exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and deliver corresponding systems from our own production. Please contact us by phone to find a suitable solution for your application. PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC white FDA compliant according to EU10/2011 Belt width 500mm outside corrugated edge welded on both sides 40mm high T-30 cleats- 400mm pitch * antistatic due to threads in the fabric of the running side endless welded with stepped finger joint food certificate is supplied V2A stainless steel carpet pad plate full surface drive: motor approx. 1,1KW * optional controllable with frequency converter connection 220/400V

Condition: ready for operation (used), Year of construction: 2008, A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible. Gjdpfx Ajt Eu Azsb Deit

Year of construction: 2000, condition: good (used), Barberan laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. the line includes - automatic loading of Tommassini (out of order) - brushing machine up and down - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps Giodeilqvrepfx Ab Dot - a line of steel calenders for pressing - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils

Year of construction: 2014, condition: used, functionality: fully functional, Type of machine REWER Manufacturing year 2014 Weight 2000 kg Power supply 14 KW Voltage 3x400 V Air pressure 7 bar Rewound material foil: OPP, PET, PVC, OPS, LDPE: 40-50 mkm. cardboard Width of material 500 mm Max. winding diameter 800 mm 1 shaft core 76 Max unwinder diameter 800 mm 1 shaft core 76 Winding speed 0-400 m/min Giedpfx Aekw Ufzjb Det Max weight 400 kg Wind direction right to left or left to right (both side) Lay-on shaft 2 psc. Rewinder and unwinder separate Web guide system with ultrasonic sensor 1 psc. Waste winder with splice table 1 psc. Slitting module rotary knife Control panel touch screen Adapter diameter 152 mm. 2 psc. Stroboscope with tape control sensor

Year of construction: 1988, condition: used, 480 x 325mm; 14,000c/h; 7 stations 6 feeders 279 Card gluer Giedpjbnczbofx Ab Dst 1 folder feeder 1529 Stapling station 300 Trimmer

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Gjdpfx Aeutni Rsb Deit Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. Giodpfx Abetrya Re Dot PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, immediately available - according to DIN EN 1539 for solvent-based substances - Maximum temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3-phase/PE 50Hz - Cable with 63A plug, also available as fixed connection (fuse protection 35 or 50 A required) - incl. 1 piece mesh shelf - Weight 550 kg - Documentation Giodpfx Aeiq Uv Nob Djt Inspection in our warehouse by appointment. Oven, ovens, industrial oven, circulating air oven, chamber circulating air oven, tempering oven, heat oven, drying oven, conditioning oven, paint dryer, solvent oven

Condition: used, Year of construction: 1991, machine/vehicle number: 19085, Falzmaschine - Folding machine Stahl T50/4-4-SAK66Year 1991 - Serial-No. 44429/91-184041 Folding Size min. 100 x 150mm Folding Size max. 500 x 820mm Folding Type: 1. Unit 4 Buckles - folding width 500mm 2. Unit 4 Buckles - folding width 500mm Pile height max. 690mm Stream delivery SAK 66 Include Compressor Gedpfxjh Axvce Ab Dsit Counter - Control PCS 100 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test