Used Ball Srew for sale (3,236)

Condition: used, mileage: 550,000 km, power: 316 kW (429.64 HP), first registration: 02/2002, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro3, Equipment: air conditioning, all wheel drive, * Mercedes-Benz 3343 Actros MP1 6x6 All-Wheel Drive Tractor Unit * First registration: 2002 * 550,000 km * Euro 3 * Telligent with clutch * Leaf-leaf suspension * 6x6 all-wheel drive * Air conditioning * PTO (power take-off) * Parking heater Lajdpfx Afex Ia N Ijfjk * Engine brake * Permissible GVW: 10,180 kg * Wheelbase: 3.60 m

Condition: used, mileage: 779,786 km, power: 480 kW (652.62 HP), first registration: 05/2007, fuel type: diesel, empty load weight: 7,500 kg, maximum load weight: 10,500 kg, overall weight: 28,000 kg, tire size: 315 / 60 R 22.5 / 11mm, axle configuration: 4x2, wheelbase: 3,500 mm, next inspection (TÜV): 04/2016, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, total length: 5,750 mm, total width: 25,500 mm, total height: 39,000 mm, front tire size: 315 / 60 R 22.5 / 11mm, number of seats: 2, operation weight: 18,000 kg, Equipment: air conditioning,

Condition: used, functionality: fully functional, total length: 1,000 mm, load capacity: 2,500 kg, Bale Clamp Condition: Ready for use and fully functional Technical Condition: good Description: Bale Clamp / Rotating Clamp – suitable for forklifts Lifting Capacity: 2,500 kg | Condition: good, fully operational Robust bale and rotating clamp designed for professional use in warehousing, recycling, manufacturing, and paper handling. The unit is fully functional, immediately ready for operation, and in good technical and visual condition. Technical Data: Type: Bale clamp / Rotating clamp Capacity: 2,500 kg Length: approx. 1,000 mm Opening width: as specified by device (see photos / inspection) Back width: on request Lasdpfx Asx Aw Syjffek Projection: on request Dead weight: on request Condition: technically good, visually good Location: available immediately Notes: Sale as-is in current used condition. All prices are net plus 19% VAT. Sale exclusively to commercial buyers with valid VAT ID. No warranty or guarantee. Charger note does not apply to attachments, but is systemically retained.

Condition: good (used), Welger Type: RC 660 Roller compactor with Brück suction Compact and fully automatic Used exclusively for producing pressed bales from low-density packaging materials. Application variants Press materials Paper edge trimming (strips and endless) Paper and film bags PP film edge trimming Film strips Clothing protection film (PP/PE films) PP/PE fiber material Insulating and nonwovens Foam mesh Packaging foam Tetrapak Length 2100mm, width 940mm, height 1755mm Dimensions of filling shaft 330 mm x 600 mm Lsdodtxbiopfx Affjak Bale format max. 400 mm x 600 mm Bale weight 20 - 30 kg depending on the material being pressed Press density 250 - 400 kg/m³ depending on the material being pressed Throughput daily output 30 bales / day Feed speed 0.36 m/s RC 660 3X 400V 50Hz 16A 2.2 kW 5.0A 700 kg Brück extraction Series: KFA Size: 60-30-3000 Air output: 6,000 m³/h Motor output: 0.3 kW Filter area: 30 m² Negative pressure: 3,100 Pa Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, empty load weight: 9,500 kg, maximum load weight: 50,500 kg, overall weight: 60,000 kg, axle configuration: > 3 axles, first registration: 08/1996, loading space length: 9,300 mm, loading space width: 2,550 mm, loading space height: 1,130 mm, loading space volume: 26 m³, total length: 9,300 mm, suspension: air, color: yellow, Year of construction: 1996, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40200 Goldhofer, TN-L6-50/80 * Year of manufacture: 1996 Ledjw U Nivspfx Affeak * ABS (Anti-lock Braking System) * Air suspension * Self-tracking steering axle * Air connection coupling heads (red & yellow) * Connection plug 2x 7-pin * Connection plug 15-pin * Lifting and lowering device * Heavy-duty lashing eyes * Suspension: Air * Gross vehicle weight: 60,000 kg * Unladen weight: 9,500 kg * Payload: 50,500 kg * Permissible gross weight: 60,000 kg * Axle manufacturer: BPW * Internal dimensions: L = 9,300 mm, W = 2,550 mm, H = 1,130 mm * Internal volume*: 27 m² * Pallet spaces: 23 * Heavy-duty trailer * Platform height: approx. 1,130 mm * Axles 5 & 6 self-steering * Tire condition all around approx. 60% * Drawbar: 50 mm Disclaimer: Subject to change, prior sale, and errors. Find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing solutions * Processing of all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained sales staff, we are happy to assist you.

Condition: used, mileage: 43,398 km, power: 132 kW (179.47 HP), first registration: 05/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2026, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), LED lighting, rear step over half the width, rear wing doors without window cut-outs, sliding door on the right, multifunction steering wheel, double passenger seat bench, hill start emergency braking lane change side wind assistant, reversing camera, DAB+, USB data socket only, MAN Media Van, cell phone interface, winter package, wooden floor in the load compartment with rear loading edge protection, C-rails on the side walls, partition wall with sliding window, lashing eyes Lsdpfexw A Rkex Affjak

Condition: used, maximum load weight: 69,220 kg, overall weight: 84,000 kg, axle configuration: > 3 axles, first registration: 01/2009, * ES-GE 6-axle ballast trailer * First registration: 2009 * Air suspension * 2 lift axles Lasdpox Hckfjfx Affok * 4 steering axles * SAF axles * Connection via NATO socket -> own hydraulic pump * Length: 15.10 m * Unladen weight: 14,780 kg * Gross vehicle weight: 84,000 kg * Payload: 69,220 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. Ljdpfxoq Nxrxo Affoak 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: excellent (used), axle configuration: 3 axles, first registration: 06/2022, loading space length: 11,060 mm, loading space width: 2,480 mm, loading space height: 1,500 mm, total length: 113,500 mm, total width: 2,480 mm, total height: 1,500 mm, suspension: air, tire size: 385/65/22.5, color: red, Year of construction: 2022, Equipment: ABS, = Additional options and equipment = - Air suspension - Central lubrication = Further information = Axle configuration Tyre size: 385/65/22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Max. axle load: 10,000 kg; Steerable Rear axle 3: Max. axle load: 10,000 kg; Steerable Weights Empty weight: 8,370 kg Payload: 39,630 kg Gross vehicle weight (GVW): 48,000 kg Functional Platform height: 150 cm Condition Technical condition: very good Visual condition: very good Lsdpfxjv I R N Ts Affsak NOOTEBOOM OVB-48-03 3-AXLE LOW-BED SEMI-TRAILER AIR SUSPENSION SAF AXLES 2ND AND 3RD AXLE WITH ELECTROHYDRAULIC ADDITIONAL STEERING REMOTE CONTROL CENTRAL LUBRICATION L=1106CM W=250CM 34 x FLOOR ANCHORS 20 x STAKE POCKETS

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Complete specifications available upon request. Chassis: * Frame construction made of welded longitudinal beams and inserted cross beams * Underrun bar width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams * Maximum crossmember spacing 400 mm (for longitudinally laid floor) * 3.5-inch king pin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside * Technical saddle load 26,500 kg Landing Gear: * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension system with 10 t load capacity each * Lifting and lowering device with 1 rotary slide valve Knorr/Wabco * Bracket for lifting and lowering device, bolted design Brakes: * Smartboard/TIM/Infocenter on bracket for lifting and lowering, in addition to the lift/lower valve * Without battery (operable only with towing vehicle) * Bracket for lights and brakes at the front of the underrun bar, total height approx. 700 mm * Basic version of tire pressure monitoring, connected to the EBS CAN bus system * With dual-release valve for brake and spring actuator * Test nipple for brake cylinder pressure at the front right brake cylinder * 1 coupling head each red and yellow * Lifting and lowering device mounted at the rear left (in the direction of travel) * EBS brake system by Wabco * EBS diagnostics via CAN bus (EBS plug), no external diagnostic cable provided! Tyres: * 8 x 445/65 R 22.5 - brand of our choice * Hub centering Lubrication: * Grease nipple strips on bogies and at the front of the steering system Lajdpfjwx Dctjx Affjk * No central lubrication Body: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of the front wall (facing rearwards), switch on lift/lower bracket * Heavy-duty front wall for platform * Side contour marking in yellow, rear in yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * 2x LED work lights mounted in the lamp plate, switched via reverse gear * 2x LED work lights, switched via reverse gear, 1 each side near landing gear * 2x LED reversing lights, 1 per side in front of 1st axle * Lighting/wiring system brand of our choice * License plate illumination * The towing vehicle must provide sufficient power for the selected lighting (esp. reverse light) * Front position lights, lower, white, 1 each right and left (LED) * 24 Volt lighting system with large multifunctional lamp * Side marker lights (LED) flashing * 1 x 15-pin and 2 x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane departure lights (LED) Floor: * Hardwood floor approx. 28 mm, alternately with galvanized omega steel profiles Paint/Coating (no metallic colors): * Chassis painted in RAL 3002 flame red * Front wall (steel construction) painted in RAL 3002 flame red * Axle hubs in chassis color * Axles and landing gear in black * Wheels in aluminum/silver, similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted in RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates welded into the outer frame per side. Lashing load max. 3,000 daN * 12 per side

Condition: used, empty load weight: 7,800 kg, maximum load weight: 42,200 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 04/1995, loading space length: 8,000 mm, loading space width: 2,500 mm, loading space height: 1,750 mm, loading space volume: 35 m³, total length: 8,000 mm, suspension: steel, color: yellow, Year of construction: 1995, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40199 Goldhofer, TN-L6-50/80 * Year of manufacture: 1995 * ABS (Anti-lock Braking System) * Self-tracking (rear-steering) axle * Air connection coupling head (red + yellow) * Connector plug 2x7-pin * Connector plug 15-pin * Lifting and lowering mechanism * Heavy-duty lashing eyes * Suspension: leaf springs * Gross weight: 50,000 kg * Unladen weight: 7,800 kg * Payload: 42,200 kg * Authorized gross weight: 50,000 kg * Axle manufacturer: BPW * Internal dimensions: L=8000 mm, W=2500 mm, H=1750 mm * Internal volume*: 35 m³ * Pallet spaces: 20 * Goldhofer 5-40/62 2+3 * Platform height: approx. 1170 mm * Tyres all round approx. 40% * Towing eye 50 mm Disclaimer: Subject to alterations, prior sale and errors excepted. More photos and videos can be found on our homepage. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles Ledpfx Afsw U Nipefsak * Fast and uncomplicated financing * Assistance with all (export) documentation * Procurement of export / customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists—we are happy to advise you.

Condition: used, tank capacity: 1,500 l, GENERAL Design: vertical Heating/cooling: available Insulation: available Max. allowable operating temperature: 145 °C Max. allowable operating overpressure: 4.0 bar Max. overpressure: 3.5 bar Agitator: beam agitator Base design: feet Ljdpexqahyjfx Affoak Location: outdoor storage Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: milk VESSEL Max. operating temperature of vessel / °C: 145 °C EQUIPMENT Manhole/dome: in the top Outlet: available

Condition: used, mileage: 1,054,044 km, power: 353 kW (479.95 HP), first registration: 02/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, emission class: euro4, loading space length: 5,650 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, all wheel drive, * MAN TGA 26.480 6x4H - 2BL Hydrodrive All-wheel drive 4x4 * Flatbed with tarpaulin and wooden stakes * Air conditioning * Manual transmission * Auxiliary heater * Removable crane mount * 6-stage retarder * 2 beds * Electric windows * Electrically adjustable mirrors * Trailing axle / with articulated axle * VIN: WMAH35ZZ38L050607 * Engine type: D2676LF05 * kW: 353 * Euro 4 * Displacement: 12,419 cc * Unladen weight: 14,580 kg * Payload: 11,345 kg * Gross vehicle weight: 26,000 kg * Wheelbase: 4,500 / 1,300 mm * Body internal length: 5.65 m Laodpfx Afjkq Ap Tsfek * With tailgate open, internal length: 6.40 m * Body internal width: 2.45 m * Body internal height: 2.70 m * Vehicle length: 9,250 mm * Vehicle width: 2,550 mm * Vehicle height: 4,000 mm * Tires: 385 / 65 R 22.5 * Net price Tel./WhatsApp:

Condition: new, Year of construction: 2024, Conow bale transport wagon BTW V9 Demo machine, built in 2024 Equipment: DEKRA 40 km/h approval 24 t permissible total weight 3-axles Dual-circuit pneumatic brake system Lsdexq H E Sopfx Affoak Parabolic suspension in FR left hydraulic locking, opens downwards Additional equipment: Tires BKT 550/45-22.5 Tool box Rounded loading edge Extendable center support Broom holder | Internal no.: 11192185

Condition: used, Year of construction: 2021, operating hours: 9,305 h, load capacity: 4,000 kg, fuel type: diesel, gearing type: automatic, Equipment: cabin, head guard, * Linde H 40 D - 02 front forklift * Year: 2021 * Operating hours: 9,300 h * Air conditioning * From first owner Laodpfx Afsxpmqxsfsk * Full service!! * More pictures and videos via Whatsapp * Information without guarantee, subject to prior sale.

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. The following is an extract from the specification. Complete specification available on request. Chassis: - Welded construction made of high-quality steel profiles with through-go crossmembers, designed for high point loads - Outer frame made of UNP steel Coupling equipment / fifth-wheel load: - 2-inch kingpin - Technically permissible fifth-wheel load: 26,500 kg Underrun protection: - According to EU regulations, bolted design Side impact protection: - According to EU regulations Landing legs: - Landing legs with single-side operation, support load approx. 66 t / lifting capacity approx. 24 t Axles: - 5 x 10 t air suspension axle units, make: SAF, with drum brakes approx. 400 x 200 mm - ABS - Wheel attachment, center-bored, 10-hole, offset ET 0 - Total air suspension stroke: approx. 200 mm, lift approx. 140 mm, lowering approx. 60 mm; control via rotary valve with detent function Steering: - 1 axle with leading steering, 2nd axle rigid, 3rd, 4th, and 5th axle with mechanical forced steering (Tridec) - Greasing points are routed centrally to the outside Axle lift: - First and second axle automatically liftable, with additional cut-off at the chassis Brake system: - Two-line pneumatic brake system according to EU regulations with EBS and RSS, automatic load-dependent control, make: Wabco 4S/3M - Spring-actuated cylinders as parking brake - Interlocked coupling heads mounted securely on the front crossmember, no connecting line to the towing vehicle - Aluminum air tank Tyres: - 10 x 445/65 R22.5 164J on rim 11.75 x 22.5 ET 0 – brand of our choice TPMS: - Tire pressure monitoring system - TPMS according to ECE R141, with data transmission to towing vehicle Fenders: - According to EU regulations: 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with 1/4 PVC fender - Rear fender with mud flaps Load securing: - 5 pairs of folding lashing rings, evenly distributed (pulling force approx. 14 t) - 11 pairs of hook plates welded into the outer frame (pulling force approx. 3 t) - 10 pairs of lashing rings in the side outer frame, evenly distributed (pulling force approx. 8 t) Stake pockets: - 10 pairs of stake pockets set into the outer frame - 6 pairs of stake pockets set into the floor (at the outer longitudinal beam) Removable stakes: - 16 pieces galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stake magazine: - One magazine per side in front of the front wall, each for 8 plug-in stakes approx. 80/80 mm Front wall: - Bolted corner stakes filled with aluminum hollow profiles, inside with a steel collision plate across the entire width and height Laodpfx Afewx Dcasfsk Floor: - Approx. 28 mm Z hardwood flooring, let into the outer frame, flush-mounted Lighting system: - According to EU regulations, 24 V with multi-chamber lamps - LED side marker lamps - LED position lamps white front - LED outline marker lamps rear - License plate lamps - 1x15 and 2x7-pin plug connections on the front crossmember Equipment: - Wheel chocks with double holder - Warning sign in accordance with ECE 70 - Work spotlight on lamp mounting (activated via reverse gear) - Holder for rotating beacon at the rear (incl. rotating beacon) - 1 piece climbing ladder mounted rigidly on each side left and right, incl. removable climbing aid - Smart Board - Sticker indicating vehicle swing-out - Sticker indicating load cen

Condition: used, empty load weight: 1,950 kg, maximum load weight: 8,050 kg, overall weight: 10,000 kg, axle configuration: 1 axle, first registration: 01/1998, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 1,300 mm, loading space volume: 9 m³, total length: 3,000 mm, suspension: steel, tire size: 385/65 22,5, tire condition: 50 %, color: green, Year of construction: 1998, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40323 Goldhofer, Ballast * Year of manufacture: 1998 * ABS (Anti-lock Braking System) * Air connection with coupling heads (red + yellow) * Double 7-pin connector * Suspension: leaf springs * Gross vehicle weight: 10,000 kg * Unladen weight: 1,950 kg * Payload: 8,050 kg * Permissible total weight: 10,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% / 50% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=3,000 mm, W=2,500 mm, H=1,300 mm * Internal volume: 10 m³ * Pallet positions: — * Manufacturer: Obermaier TFB 100 Disclaimer: Subject to change, prior sale, and errors. More pictures and videos are available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing options * Handling of all (export) documentation Laedpfxjxv Rtwj Affsk * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, graphics, coatings, etc. * Professional loading and load securing * TÜV inspections, registration service * Transport of commercial vehicles Contact our trained specialists — we are happy to advise you.

Condition: new, Reglaj Attachment( Ballast Leveling Bucket) Laedpfxjv Spfzs Affsk Designed to improve sub-rail stability, our Reglaj Attachment is used for ballast leveling operations. For more detailed information, please feel free to contact us.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), empty load weight: 12,000 kg, volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Lodpfx Ajvtpq Hoffjak Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: like new (used), Year of construction: 2020, operating hours: 100 h, input voltage: 220 V, total length: 2,750 mm, total width: 850 mm, total height: 2,000 mm, type of input current: three-phase, overall weight: 500 kg, Almost unused machine. Ledexayxkjpfx Affsak

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Laodpjxttc Aofx Affok Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: used, empty load weight: 3,400 kg, maximum load weight: 15,300 kg, overall weight: 18,700 kg, axle configuration: 2 axles, first registration: 02/2006, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 1,300 mm, loading space volume: 9 m³, total length: 3,000 mm, tire size: 385/65 22,5, tire condition: 60 %, color: red, Year of construction: 2006, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference No. for inquiries: 40205 Goldhofer, Ballast • Year of manufacture: 2006 • ABS, Anti-lock Braking System • Air connection coupling heads (red + yellow) • Electrical connectors: 2 x 7-pin plugs Lajdpfx Aoxatwgjffok • Gross weight: 18,700 kg • Unladen weight: 3,400 kg • Payload capacity: 15,300 kg • Permissible total weight: 18,700 kg • Tyre condition, axle 1: 50% – 50% — Tyre size: 385/65 R22.5 • Tyre condition, axle 2: 60% – 80% — Tyre size: 385/65 R22.5 • Tyre sizes: 385/65 R22.5 • Internal dimensions: L = 3,000 mm, W = 2,500 mm, H = 1,300 mm • Internal volume*: 10 m³ • Pallet spaces: • Goldhofer • TX2-15/80 Disclaimer: Specifications subject to change; intermediate sale and errors excepted. More photos and videos available on our website. Our comprehensive service portfolio includes, for example: • Purchase / sale / rental of commercial vehicles • Fast, straightforward financing • Assistance with all (export) documentation • Ordering of export / customs number plates • Vehicle preparation: new tarpaulins, branding, painting, etc. • Professional loading / load securing • TÜV approvals, registration service • Transfer / delivery of commercial vehicles Consult our trained professionals — we are pleased to advise you.

Condition: used, empty load weight: 3,160 kg, maximum load weight: 14,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2001, tire size: 385/55 22,5, tire condition: 60 %, color: black, Year of construction: 2001, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference No. for inquiries: 40207 Hueffermann, HTA1800 * Year of manufacture: 2001 Lajdpoxatwtsfx Affsk * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Air suspension * Air connection coupling head (red & yellow) * 15-pin connection plug * Lifting and lowering device * Heavy-duty lashing eyes * Gross vehicle weight: 18,000 kg * Unladen weight: 3,160 kg * Payload: 14,840 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 60% -- 60% - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: 60% -- 60% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Manufacturer: Hüffermann Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Handling all (export) documentation * Ordering export and customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained professionals—we will be happy to advise you.

Condition: used, empty load weight: 3,460 kg, maximum load weight: 14,540 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2008, tire size: 385/55 22,5, tire condition: 40 %, color: black, Year of construction: 2008, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40208 Hueffermann, HTA1800 * Year of manufacture: 2008 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Duomatic air connection * 15-pin connector plug * Lift and lowering device * Gross weight: 18,000 kg * Unladen weight: 3,460 kg * Payload: 14,540 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 40% -- 40% - Tire size: 385/55 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 Disclaimer: Specifications subject to change, prior sale, and errors excepted. Further photos and videos are available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Arranging all (export) documentation * Ordering of export / customs license plates Lasdjxatwyspfx Affsk * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TüV inspections, registration service * Transfer / delivery of commercial vehicles Consult our trained specialist staff — we will be happy to advise you.

Condition: used, empty load weight: 7,800 kg, maximum load weight: 42,200 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 04/1995, loading space length: 8,000 mm, loading space width: 2,500 mm, loading space height: 1,750 mm, loading space volume: 35 m³, total length: 8,000 mm, suspension: steel, color: yellow, Year of construction: 1995, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 401991 Goldhofer, TN-L6-50/80 * Year of manufacture: 1995 * ABS (Anti-lock Braking System) * Self-tracking steering axle * Air connection coupling head (red + yellow) Laedpfx Afsw U Nkgefok * Connector plug 2x7-pin * Connector plug 15-pin * Lifting and lowering device * Heavy-duty lashing eyes * Suspension: Leaf spring * Gross vehicle weight: 50,000 kg * Unladen weight: 7,800 kg * Payload capacity: 42,200 kg * Permissible total weight: 50,000 kg * Axle manufacturer: BPW * Internal dimensions: L=8,000 mm, W=2,500 mm, H=1,750 mm * Internal volume*: 35 m³ * Pallet spaces: 20 * Goldhofer 5-40/62 2+3 * Platform height: approx. 1,170 mm * Tyre condition all round approx. 40% * Drawbar 50 mm Liability disclaimer: Subject to alterations, prior sale, and errors excepted. More photos and videos are available on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Processing of all (export) documentation * Ordering of export licence plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer/transport of commercial vehicles Please contact our trained staff—we will be happy to advise you.