Used Ball Srew for sale (3,171)

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Fgedsv D Rg Depfx Akysh Working...

Condition: new, Number of motors 1 Stück 0 , mm Control , 0 cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg Graule KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg Fgsdpoy T R Sqsfx Akyeh ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: 7,290.00 Electronic length stop with support plate EUR Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: EUR 600.00 Manual length stop Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-30 m/min. control Powercom Weinig Powermat 500 (Window Version for window producers) ----- The machine will be a partial renovated at our warehouse prior to delivery. The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated. Technical Summary: ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4: CNC-controlled axial adjustment - Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment - Window package for glazing bead separation: pneumatic cycling for right and top spindles for bead separation Detailed Description: ----- Tool arrangement no. 018 for window production Technical Data: ----- Working width: 20 – 230 mm (with tool cutting circle 93 – 125 mm) Working height: 8 – 120 mm (with tool cutting circle 93 – 125 mm) 1. Tool Spindle ----- First bottom spindle Diameter: 40 mm Motor with brake: 7.5 kW Speed: 8,000 rpm Tool cutting circle: 125 – 180 mm Tool cutting circle (rebate cutter): 130 – 160 mm Axial adjustment range: 17 mm Rebating device MarathonCoating for table insert before 1st bottom spindle 2. Tool Spindle POWERLOCK/HSK ----- First right spindle Motor with brake: 7.5 kW Speed: 8,000 rpm Includes high-performance ball bearings Tool cutting circle: 93 – 200 mm Maximum profiling depth: 35 mm Axial adjustment range (PowerLock): 55 mm Radial adjustment range: Min. tool diameter at fence level: 93 mm Max. tool cutting circle behind fence line 200 mm Right tool spindle: axial positioning (55 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm Fsdjzp Rxyjpfx Akysgh CNC-controlled axial adjustment CNC-controlled radial adjustment 3rd tool spindle POWERLOCK/HSK ----- First left tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Maximum profiling depth 35 mm Axial adjustment range for PowerLock 55 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Pressure shoe in front of left tool spindle, incl. 2 spring-loaded lateral pressure rollers 4th tool spindle POWERLOCK/HSK ----- First top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Tool cutting circle for straight-knife cutterheads max. 163 mm Maximum profiling depth 35 mm Axial adjustment range 40 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Top tool spindle: axial positioning (40 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm 5th tool spindle POWERLOCK/HSK ----- Second top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Tool cut...

Condition: used, Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x H7 max. table load 700 kg number of toolpositions 60 pos. tool taper HSK-A63 Fsdpfjx A H Rlex Akysgh total power requirement 49,7 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 4 axes (+ NC dividing head) - Swivel-Millinghead - Spindle refurbished - NEW X, Y, Z guideways - NEW ball screws - NEW X-axis bellows

Condition: used, Year of construction: 2002, x-travel 2.200 mm y-travel 560 mm Fedpfxstqmr Re Akyegh z-travel 720 mm control 840 D Powerline ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper SK 40 internal coolant system feed 40 bar work table: table surface area 2.600 x 600 mm max. table load 2.200 kg number of T-slots 6 T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 30 pos. max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm feeds: feed speeds 20.000 mm/min input unit 0,01 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min measuring system Resolution 0,001 mm total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 6,0 x 3,7 x 2,9 m CNC - Machining Center Vertical DECKEL MAHO - DMF 220 linear - from individual part production (aluminium, brass and stainless steel) - incl. workroom wall - M26 function (switching to blown air through spindle center) - new ball screw Z-axis incl. bearing (April 2015) - new milling spindle (2016) - Spindle hours: ca. 11,966 h - WITHOUT vices

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Fgjdpfx Akou Ndbpjyeh Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. Fgsdpsu Icpcjfx Akysh - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Condition: used, Valves, gate-valves, butterfly-valves, ball-valves, security-valves Fjdpfx Akstunb Aoyjgh

Condition: new, Year of construction: 2026, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Fgedpfx Aksr Eli Toyeh Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve Fjdpfxoz E U Die Akyjgh - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: used, functionality: fully functional, Year of construction: 1989, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 3 Year of manufacture: 1989 Technical data Manufacturer: Fasti Type: 212-20-3 Year of manufacture: 1989 Working length: 2040 mm Sheet metal thickness: 3 mm Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Fsdpez Hayxsfx Akyogh Equipment - Controlled rear stop 1000 mm with ball rollers, extendable to 1500 mm - Siemens S7 control system for bending angle + rear stop - Manual adjustment of bending dies - Bending rail 12 mm - Support rail, height 130 mm, length 1,600 mm, segmented All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2016, Overview This ABE KEG COMMANDER DUAL HEAD is an automatic keg washer built in 2016 by American Beer Equipment (USA) for craft breweries. Two kegs are processed side by side in a PLC-controlled cleaning cycle, with an output of 24-30 kegs per hour. The compact stainless steel unit carries its tanks, pumps and piping in its own frame and is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) Fgsdoz Hc Ulopfx Akyoh - Model: KEG COMMANDER DUAL HEAD - Year of manufacture: 2016 - Machine type: automatic keg washer with 2 washing stations - Output: 24-30 kegs/h - Operating mode: automatic, PLC with HMI display - Tank volume: 25-30 US gal (approx. 95-115 l) - Maximum power consumption: 11.3 kW - Electrical supply: 3-phase - Feed water: min. 4.1 bar (60 psi) at approx. 57 l/min (15 gpm) - Compressed air: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Air drain pressure: 1.4-2.1 bar (20-30 psi) - CO2 supply: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Machine weight: 220 kg Equipment - Two washing stations with height-adjustable keg holders and wash heads - Control panel with HMI display, a cycle start button per station, cycle cancel and emergency stop - Integrated stainless steel tanks - Two Goulds pumps with 3-phase motors - Stainless steel piping with water and drain connections and manual ball valves - Operator's and technical manual (English) Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain.

Condition: reconditioned (used), Working width 3600 mm Working height 2600 mm Number of cylinders 5 St. loading dimensions L x W x H 4400 x 1150 x 2970 mm weight 3000 kg Schafberger + Sproedhuber Bavaria Frame Press ----- Machine will be partially reconditonned by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment Fgsdpsw T Un Uofx Akyeh via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoiding cylinder collisions. Lower abutment adjustable in several positions for the most favorable insertion height. 3 vertical press cylinders, double-acting, stroke adjusted to working height 2 horizontal press cylinders, double-acting Abutment and pressure plate depth 80 mm Working size: Length x Height = approx. 3,600 mm x 2,600 mm Space requirement/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (Length x Width x Height) Option: ALWA pressing supports for sloped windows (Technical specifications according to the manufacturer – no guarantee! Images may differ from the original. Prices are net, plus VAT (domestic))

Condition: used, Year of construction: 2000, sheet length: 4.100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000New Price: approx. 100,000 EURO Condition: Used, very good condition Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch Fgodpfjwiatvox Akyeh - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: - Operating manual in GERMAN - Machine and equipment comply with CE regulations

Condition: new, mileage: 21 km, power: 88 kW (119.65 HP), fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, - Isuzu M21 T E MT Single (track width 1.4m!) Steinmetz aluminum flatbed with loading crane, the vehicle is available for rent with an option to purchase. Chassis: Isuzu 21 T E MT Single - Gross vehicle weight 3500kg, payload of the finished vehicle with loading crane and aluminum flatbed approx. 650kg - 6-speed manual transmission - Trailer coupling, ball hitch 3500kg with wiring harness (factory installed) - BI-LED lighting - Electric parking brake - Air conditioning - Carplay radio - Rearview mirror with rearview camera - Multifunction steering wheel - Auxiliary drive, factory installed - Tires 205/75/R16C - Safety Pack 1: - ABS: Anti-lock braking system with BAS - ASR: Anti-slip control on the rear axle - EVSC: Electronic stability control - LDWS: Lane departure warning system - MOIS: Moving object detection - DWS: Distance warning system - MAM: Emergency braking in front of an obstacle - FVSN: Front field detection - DDAW: Driver drowsiness detection system - TSR: Traffic sign recognition - TPMS: Tire pressure monitoring system - AEBS: Autonomous emergency braking system - RM: Rearview camera with monitor - AEBS: Autonomous emergency braking system for pedestrians and cyclists Aluminum flatbed: - Inside: 2720mm x W 1820mm x H400mm - Bottom plate 18mm - Bottom frame with airline track all around - Airline track also in the front panel - Aluminum side walls, anodized, with folding step, easily removable - Tool box - Work lights - Other flatbed dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of origin: Italy) Fgjdsyt Rttspfx Akyjh - Lifting capacity according to manufacturer: Max. 995kg at 3.2m=815kg, at 4.40m=575kg, at 5.60m=400kg, at 6.80m=300kg, at 8.05m=220kg - Design according to CE directive (EN 12999) - Slewing range 370° (mech. slewing range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard chrome plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs extendable on both sides, special support legs, support width 3.10m - Hydraulic support legs pivotable 30° and 180°, CE, incl. M.O.L. (Maximum Operating Load) - Load hook and mounting brackets - Onboard voltage 12V - Electrical modules for Danfoss S800 control block, 4 functions - Danfoss control block S800, 5 functions incl. high-pressure filter - Special support legs, support width 3.10m, 1 piece - Additional cost for shortened support legs by 80mm - Mechanical arm extension N » reach 1.30 m (7.0k - Stainless steel screws and stainless steel hose clamps - Dinitrol application (cavities) - Zinc primer - Switch for work lights near the control block, factory installed - LED work lights on the swivel arm, factory installed - LED for 2 support legs - Optional: Shovel holder, 90° rope, ladder carrier/transport frame on the front or rear panel, additional storage boxes available Errors and prior sale are reserved. ... Air conditioning, climate control, VAT can be shown, ABS, electric windows, central locking with remote control, trailer coupling, power steering, spare wheel, cab: day cab, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, particulate matter badge: 4 - Green.

Condition: used, mileage: 71,350 km, power: 55 kW (74.78 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: orange, gearing type: mechanical, emission class: euro5, Equipment: ABS, all wheel drive, soot filter, Your MULTICAR authorized dealer, with expertise, service, and advice, offers you: MULTICAR M27 C compact 4x4, optionally with snowplow + salt spreader First registration: 02.12.2020 Mileage: 71,350 km Operating hours: 2,570 engine hours / 406 hydraulic hours Optional total weight of 3,500 kg or 4,500 kg Condition: Serviced, oils, filters, and wear parts replaced, workshop-tested, visually and technically fully refurbished, newly preserved Equipment: - 2.0 liter VW turbo diesel, 55 kW / 75 hp, Euro V - 4x4, switchable all-wheel drive - 5-speed manual transmission with crawler gear reduction - 4-channel ABS, 4-wheel disc brakes, internally ventilated - Short wheelbase 2,450 mm - Mobile hydraulics H03 with a second working circuit (for driving attachments and superstructures, including the operation of a front lift. Volume flow 2 x 40 liters/min. at a diesel engine speed of approx. 2800 rpm, pressure max. 200 bar, driven by an electro-hydraulically switchable, engine-dependent auxiliary drive and tandem gear pump, distribution of the oil volume to 2 independent main consumer circuits, each with up to 40 liters/min and the control functions. In the standard equipment, 2 double-acting control functions and 1 working circuit at the front, as well as 1 working circuit (behind the cab on the right) with flat-sealing hydraulic couplings, simultaneous control of the volume flow for a continuous consumer axis (1 working circuit) with 0-80 liters). - 2nd working circuit - Front attachment module 03-5 - 4-pin socket at the front - Leak oil line at the front - Quick-change mounting bracket SWV 500 - Three-way tipper 2,060 x 1,495 x 400 mm with angled front wall - Light bar with superstructure spotlights - Rotating beacon, extendable, warning markings - Electric windows, heated exterior mirrors - Ball hitch - trailer coupling - Daytime running lights - Driver's air-suspension seat, headrests, interior mirror - Tires 285 / 65 R16C M+S - Comfort steering wheel, CD - radio - Reversing camera with monitor Optional attachments for winter services: Spring flaps - snowplow FIEDLER FRS Width 2.00 m, clearing width 1.70 m, hydraulically pivoting, quick-change mounting, spring flaps, rubber scraper blade, warning flags, used unit, year of manufacture 2020, net price: 1,750.00 EUR Salt spreader type HILLTIP IceStriker 1100 (new unit with 12 months manufacturer's warranty) Electrically driven spreader made of plastic with integrated vibrator and folding top 1100 liter filling volume, speed-dependent control License plate and rear lighting Rotating beacon, LED - spreader lighting Sensor for material end alarm Telescopic chute, stainless steel grid Weight 145 kg Net price: 12,950.00 EUR Other versions of winter service equipment are available on request. Errors, changes, and prior sale reserved. Our general terms and conditions apply. Benefit from our many years of experience in sales + service and have us prepare your individual offer. Also, take advantage of our leasing and financing options. We promise you competent advice and support from our qualified staff. Fjdpfez I Ha Isx Akyegh You can find further offers from the commercial vehicle manufacturers MULTICAR and ISUZU as well as a wide range of attachments at Tel.:

Condition: used, mileage: 39,300 km, power: 107 kW (145.48 HP), first registration: 01/2017, fuel type: diesel, overall weight: 5,600 kg, next inspection (TÜV): 06/2026, color: blue, gearing type: mechanical, emission class: euro6, Equipment: ABS, all wheel drive, soot filter, Your MULTICAR authorized dealer, with expertise, service, and advice, offers you: MULTICAR FUMO CARRIER 4x4 with snowplow + spreader Initial registration: January 24, 2017 Mileage: 39,300 km / 2,693 operating hours Condition: Inspected, oils, filters, and wear parts renewed, workshop-checked, visually and technically completely refurbished, newly preserved Equipment: - 3.0 liter Iveco turbo diesel, low emission according to Euro VI, 107 kW / 145 hp - short wheelbase (2,930 mm) - 4x4 drive including crawler gear - 10 forward and 2 reverse gears - Power steering - Fully synchronized 5-speed manual transmission (90 km/h) Additional equipment: - 2-circuit mobile hydraulics H03-3 with simultaneous control of the working circuits - Leak-proof, flat-sealing quick-release couplings - Rear hydraulic connections - Leak oil line at the front, socket at the front Fjdez Iidiopfx Akyegh - Quick-change mounting frame SWV 500 - Increased load capacity to 5,600 kg gross weight, reinforced front axle 2.7 t and rear axle 3.8 t - Tires 285 / 65 R16 M+S - Light bar on the cab roof with adjustable auxiliary headlights and work lights (for use with front-mounted equipment) - LED rotating beacon, telescopic - LED work lights at the rear - Equipment mounting kit 2, snow removal function - Electrically heated and adjustable exterior mirrors, electric windows - CD radio with MP3 function, FM, RDS, mute, Bluetooth - interior mirror, comfort steering wheel - Ball head - trailer coupling (3.5 t trailer load) - Driver and passenger - suspension seat, headrests - Warning marking red - white, 1 set = 4 pieces Three-way tipper 2,720 x 1,495 x 400 mm with angled steel front wall extension Optional winter service attachments: Snowplow SIMED Type PMS 170 - 1 (year of manufacture 2019) net price 1,750,- € Total width 2.00 m, clearing width in oblique position approx. 1.70 m, blade height 0.60 m, hydraulically pivotable, quick-change attachment, overload protection by deflection spring, rubber scraper strip, warning marking, warning flags Flatbed spreader KIF SS - 1200 / E (year of manufacture 2011) net price 4,500,- € Filling volume 1,200 l Equipped with 2 conveyor screws and rotary spreader Spreader and chute made of stainless steel, incl. folding roof, protective grille, warning marking, "winter service", adjustable spreading rate and spreading width via control panel in the cab, spreading width from 1-6 m, spreader stop when vehicle stops, 4 support legs or Spreader superstructure FIEDLER FSS 1100 (year of manufacture 2020) net price 6,900,- € Filling volume 1,200 l Equipped with conveyor screw and rotary spreader Spreader and chute made of stainless steel Incl. folding roof, protective grille and spreader lighting Adjustable spreading rate and spreading width via control panel in the cab Spreading width adjustable from 1-6 m Spreader stop when vehicle stops 4 support legs Other models of winter service equipment are in stock. Errors, changes and prior sale reserved. Our general terms and conditions apply. Benefit from our many years of experience in sales + service and have us create an individual offer for you. Also take advantage of our leasing and financing options. We promise you competent advice and support from our qualified staff. You can find more offers from the commercial vehicle manufacturers MULTICAR and ISUZU as well as an extensive range of attachments at: Tel.:

Condition: used, mileage: 11,491 km, power: 175 kW (237.93 HP), first registration: 08/2020, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2027, color: orange, gearing type: automatic, emission class: euro6, loading space length: 4,200 mm, loading space width: 2,350 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Well-maintained, like-new 12-ton Mercedes-Benz Atego 3 dump truck with a 6-cylinder engine, Meiller three-way tipper, payload of 5,740 kg, 3-seater, air conditioning, high-performance engine brake, automatic transmission, differential lock, trailer hitch with pintle hook and ball hitch for trailers, hydraulic connections for the tipper, reversing camera, only approximately 11,491 km, and more. Equipment: S-cab Classic-Space short with rear window 3 seats Wheelbase 3,260 mm Weight variant 11.99 tons (4.9/8.1) Fgodez I Hnrspfx Akyeh Unladen weight 6,250 kg Payload 5,740 kg Engine OM936 R6 7.7 L with 238 hp and 1,000 Nm Engine Euro 6 D Drive 4x2 Meiller three-way tipper, 4.20 m x 2.35 m side boards, 0.50 m high Front wall 700 mm high Lashing eyes in the tipper bed Automatic transmission type G 90-6/6.70-0.73 Mercedes-Benz PowerShift 3 Differential lock in rear axle Front and rear axles with leaf suspension Stabilizer for extreme heavy loads on rear axle Front axle 5.3 tons, rear axle crown wheel 390 hypoid 11.0 tons Front spring 5.1 tons, rear spring 8.1 tons Axle ratio i = 4.300 Air conditioning Electronic braking system with ABS, ESP and ASR High-performance engine brake Lane keeping assist Active Brake Assist Disc brakes on front axle and drum brakes on rear axle Cruise control Reversing camera Trailer hitch with pintle hook and air pressure connections Trailer load with continuous braking system 12,000 kg Hydraulic connections at the rear for tipping trailers Trailer hitch with ball hitch for trailers up to 3.5 tons Sun visor outside Roof hatch Work lights Electrically adjustable side mirrors and electric windows Driver's comfort suspension seat with velour seat cover Very well-maintained and in very good condition with only 11,491 km Price NET, plus 19% VAT. We will be happy to provide you with attractive financing options. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2624

Condition: new, mileage: 36 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 3,655 kg, maximum load weight: 3,835 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 5,700 mm, loading space length: 4,000 mm, operating hours: 90 h, Equipment: ABS, additional headlights, air conditioning, central locking, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, trailer coupling, - Fuso 9C18 City Roll-off Tipper with GSR. Also available for rent from 6 months with purchase option - The displayed images are sample reference photos – exact equipment on request - Not in stock; delivery time depending on configuration: 2 to 5 months - Automatic transmission (Duonic) - Air conditioning - Differential lock - Trailer hitch with 3,500 kg ball coupling - Comfort seat - 1x tool box - 2x work lights - Rotating beacons, warning light bars, special signal system, front & rear flashers available optionally by arrangement - Gross vehicle weight: 8,550 kg, unladen weight: 3,655 kg, payload without container: 4,895 kg - Downrating to 7.5 t GVW possible, then payload approx. 3,850 kg - Wheelbase: 3,400 mm - Continental M+S tyres - Roll-off body, 6,000 kg lifting capacity, available with articulated or slider arm and hydraulic container locks - Body for 900 mm or 1,570 mm hook height according to DIN standard 30722-1 available - New City roll-off container with swinging tailgate available optionally from €2,900 plus VAT - Subject to error and prior sale! - More information and XXL images on our homepage - For inquiries in English please call Fgodpfxszv Ntvj Akyjh Features: air conditioning, climate control, automatic transmission, VAT deductible, ABS, multifunction steering wheel, radio, onboard computer, heated mirrors, electronic immobiliser, central locking with remote control, trailer coupling, fog lights, power steering, differential lock, tinted windows, rear fog light, tachograph, short-distance cab, air-suspended driver seat, electric windows, work lights, additional lights, PTO (power take-off), rotating beacon, new condition, Emissions class: Euro 6, diesel, rear-wheel drive, very good condition, HSN 7149, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, available for rent, particulate badge: 4 - green, reversing camera.

Condition: used, mileage: 135,000 km, power: 250 kW (339.91 HP), first registration: 02/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that we have aroused your interest with our offer and can assure you that you will be able to buy a good and inexpensive vehicle with a traceable service history from us! Certified Orten SafeServer structure with 4-row rear load securing AHK MAUL AHK ball LBW 2,000 KG FULL AIR SUSPENSION Rear view camera Automatic AIR CONDITIONING Differential lock Lane keeping assistant Brake assistant Roof polisher Sun visor GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer declaration for export. Fedpfx Aetvt R Dskyegh FINANCING If you wish, we will be happy to make you a LEASING-RENTAL PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-TEST / Speedometer test / Installation of OBU device and service by our BRAND WORKSHOP on site TOLL / ROAD TOLLS TOLL can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 KM away Frankfurt-Hahn Airport 40 KM away Luxembourg Airport 75 KM away Sale in accordance with our terms and conditions. The information on the Internet is non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for tips and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 137,197 km, power: 132 kW (179.47 HP), first registration: 09/2016, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 2 m³, loading space length: 3,500 mm, loading space width: 2,070 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle No. for customer inquiries: 158 ----Special Equipment: * Automatic climate control * Trailer hitch: ball head on trailer coupling * Speed control system (cruise control) * Storage compartment on dashboard with USB port * 13-pin trailer socket * Audio system: radio with CD player, MP3-compatible, USB and Bluetooth hands-free system * Roof storage compartment with DIN compartment additionally * Rear axle suspension: parabolic (reinforced) Fgsdez Id U Nopfx Akysh * Grab handle on A-pillar * Cold compressor 170 ccm * Fog lights with static cornering light * Spare wheel in driving condition * Spare wheel holder between chassis longitudinal member ----Standard Equipment: * Airbag driver side * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Drive type: rear-wheel drive * Version: S-series * Exterior mirrors, electrically adjustable and heated * Brake assistant * Electronic brake force distribution * Electronic Stability Program (ESP) * Front axle suspension: transverse leaf spring * Power windows * Windshield and side windows tinted * Generator 150 A * Transmission 6-speed * Body/superstructure: standard platform body * Instrument cluster with pixel matrix display * Fuel tank: 70 liters * Headlight range adjustment * Engine 3.0 L - 132 kW diesel * Radio preparation with speakers * Wheelbase 3450 mm * Diesel particulate filter * Low emission according to exhaust standard Euro 6 * Power steering * Seats in the cab: co-driver double seat with headrests * Daytime running lights * Maintenance indicator * Immobilizer * Central locking with remote control * Permissible total weight 3.50 t ----Technical Data: * Wheelbase: 3,450 mm * Load compartment dimensions: L: mm W: mm H: mm * Payload: 1,147 kg * Tire size: 235/65R16C * Tire tread: approx. 20% ----German vehicle! * 13,850 Euro net plus VAT * Inspection/emission test (TÜV) valid until 02/2027 * A security deposit will be retained for export to third countries or the EU. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly take your used vehicle in part exchange! * Financing/leasing also possible in difficult cases * This description serves only for the general identification of the vehicle & does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/pictures provided are non-binding and do not serve as guaranteed characteristics. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently convince himself of the condition and equipment of the vehicles before the purchase. * Subject to price changes, typing errors, errors and prior sale * Dear customer, please understand that we prefer to sell the vehicle to businesses or dealers due to its age and mileage. Thank you very much. * We speak: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-mail: * Internal number: 158

Condition: used, mileage: 9,240 km, power: 110 kW (149.56 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: grey, gearing type: automatic, number of seats: 3, total length: 6,400 mm, total width: 2,190 mm, total height: 3,020 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, tail-lift, * MB Premium Touchscreen Multimedia System * NAVIGATION/BLUETOOTH/DAB+/4G/SOS * Voice control * MB leather steering wheel with multi-function touch system * Rear view camera system * 3 HAAGSTEDT & ROOFS Premium leather seats with headrests * Automatic climate control * Central locking * Start/Stop system ----* DUNLOP auxiliary air suspension on the 2nd axle with control panel & pressure gauge * Automatic daytime running lights * Cruise control ----SODIAK HORSE TRUCKS Sport horse body* side loading ramp * 2 variable horse stalls * Water trough with water tank & pump & feed bucket * Ventilation system in the body * BRIGADE camera system in the body * Adjustable stall divider (grille) * Separate tack room with changing area & shelving system in the rear * Ball hitch ----* Tire size: 225/65R16 * Fuel tank: 80 * AdBlue tank: 15 * Technical total weight: 3500 * Unladen weight: 2500 * Permissible trailer load: 2000 * Overall length: 6400 * Wheelbase: 3924 ----Vehicle number: 12523----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport----YOUR VTS TEAM Fgodpfxez Igd Ho Akyeh

Condition: used, Year of construction: 2016, operating hours: 3,200 h, power: 232 kW (315.43 HP), next inspection (TÜV): 09/2024, Equipment: air conditioning, all wheel drive, cabin, front linkage, * Deutz-Fahr 9340 TTV * First registration: April 29, 2016 * Year of manufacture: 2016 * Operating hours: 3,184 h * Electrically adjustable and heated mirrors * Automatic climate control * LED work lights * 60 km/h top speed * Performance Steering ready with ''EASY-STEER'' function * Upper link CAT III for front hitch with automatic locking device * External operation for front hitch with 7-pole and 3-pole front socket * Load-Sensing with 210 l/min * Additional electric control unit at the rear with 2x double-acting valve connections * Suspended and braked front axle * ISOBUS preparation * i-Monitor 2 12'' screen with color camera Fgedevht Hnjpfx Akyoh * K80 ball hitch -----Internal vehicle number: 9251----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: new, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Fgodou Uvalepfx Akysh Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: ready for operation (used), HFB 6/360.07.637.01 thread SN 8E298 KGT type 50x5x1325 + 2x ball bearings, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fsdpoqdm Nnsfx Akyegh