Used Ball Mandrel for sale (3,489)

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar Hodju Ibvhspfx Ah Njfb total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) i.D. *

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Hfedpfsndn Agsx Ah Nob This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: used, Year of construction: 1996, functionality: fully functional, total length: 2,050 mm, total width: 1,020 mm, total height: 2,820 mm, overall weight: 3,050 kg, rotational speed (max.): 1,480 rpm, Offered are two ball mills, model Cobra 751, from manufacturer Bühler. Both machines come together with a pre-mill (model SRK-690) from the same manufacturer. All machines are in used condition but are fully operational. All machines comply with up-to-date safety standards. An inspection of the machines is possible upon request and by appointment. We are available for any further questions. Hfsdpfexldumsx Ah Nsb The stated price is for one pre-mill and one ball mill together, not for all 4 machines!

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 9314, controller model: Beckhoff mit Addison DataBend, wall thickness: 3 mm, working length: 6,000 mm, workpiece diameter (max.): 76 mm, Equipment: CE marking, TECHNICAL DETAILS Max. diameter: 76 mm Max. wall thickness: 3 mm Max. bending length: 6,000 mm MACHINE DETAILS Control: Beckhoff with Addison DataBend Dimensions & Weight Dimensions (L x W x H): 8,000 mm x 2,000 mm x 2,000 mm Transport weight: 6,100 kg Transport packages: 1 EQUIPMENT incl. several mandrels and bending formers Documentation Hodpfex Rbf Njx Ah Nefb CE marking

Condition: excellent (used), Balancing valve, shut-off valve, ball valve, ball valve -Manufacturer: Castel, ball valve, unused, original packaging -Type: 6590/M12 -Connections: 12 mm ODS -Cardboard dimensions: 130/85/H40 mm -Weight: 0.3 kg. Hfodpefyh Dlofx Ah Nob

Year of construction: 1992, condition: new, Brand NSK Model: 6203 C2 Year of construction: Unused Weight (kg) approx. 12460 gross / 11880 net Number of pieces in stock 170.280 ( approx) Made in Japan Hedpfx Ahoqa Anfs Njfb Comments single row deep grove ball bearing , packaging by 360 pieces in carton Sales condition Please contact us for min quantity

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Hfjdpfxeu Ibvuj Ah Nob Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension Hedpfsng Exaox Ah Nofb 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 2008, condition: used, functionality: fully functional, empty load weight: 690 kg, total length: 1,350 mm, load capacity: 12,000 kg, construction width: 300 mm, Tragedorn Load Centre: 745 Condition: As new Technical Condition: Very good Hjdpfx Ahsx Im Ane Nofb Description: In addition to this MAKE - MODEL, we have around 150 heavy-duty forklifts, container handlers, reach stackers, forklifts, and terminal tractors in stock at our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase, and financing at fair conditions are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Please call me, Marco Levermann, for detailed advice on this MAKE - MODEL. By the way: Our forklift specialist workshop is specialized in the repair and maintenance of large equipment from 8 tons upwards. We are also pleased to offer your vehicle for consignment sale at our premises.

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: Hfjdpotr U Hljfx Ah Nsb → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: excellent (used), Axial groove ball bearings, axial groove ball bearings, axial ball bearings, axial bearings -Manufacturer: ISB, axial ball bearing 51144M -Main dimensions according to: ISO 9001:2000 -Outer diameter: 270 mm -Width: 37 mm Hfodpjf Ngcgofx Ah Nob -Inner diameter: 220 mm -Number: 4x ball bearings available -Price: per piece -Weight: 4.5 kg

Year of construction: 2019, condition: new, Brand NXZ Model: 6316, 6318, 6319, 6320, 6326, 6328, 30224, 30315, 30316, 30324, 30328, 30330, 32221, 32315, 32316, 32317 Year of construction: Unused Weight (kg) approx 11360 Hfjdpfx Aheqa An Uj Njb Made in China Comments Single packed or wrapped, packed in cartons by multiple pieces Selling condition Selling as full quantity only

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Used rotary hearth furnace with mandrel hardening press Make: Aichelin and mandrel hardening press MAP DHM 1-350 S / year of manufacture: 2004 Type: Rotary hearth furnace Aichelin RDGs 270 Hfedpfx Asw Rrxfsh Nob Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS

Condition: used, Unknown test mandrel 50,000 mm with cone holder. Information 1: H=35.643 Hfsdpfx Aow Ut D Roh Nsb Statement 2: ø 50,000

Condition: new, "Properties: Bending radii: R10 to R200 (min. R= 1.8xD) (depending on the wall thickness, the material and the pipe diameter) Max. Bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 per 9 bends Control: NC1 Bending direction: counterclockwise Effective length (available in different lengths as required): 1,5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3m mandrel) NOTE: The price quoted refers to a length of 1.5 m. Other lengths available on request! Premature mandrel retraction Positioning and rotation with mechanical stops and precise digital display Hfedpfx Aouudrkoh Neb Pneumatic four-jaw chuck Performance: Hard copper and aluminum : 60 x 4 mm Steel tube : 60 x 3 mm Stainless steel : 60 x 2 mm Scope of delivery: Machine Standard accessories (e.g. foot switch, operating instructions, 2 hex, 4 sets of chuck jaws, bending grease, 25 mm mandrel bar) Delivery without hydraulic oil"

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° Hedpfx Aettah Rjh Nofb → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: excellent (used), Ball valve internal thread Hfodpfx Aev Tm Sneh Nob -Internal thread: 2 -Full bore, solid sphere -Quantity: 195 pieces in stock -Packaging unit: 12 pieces -1 carton at: 84.00 euros -Price shown: piece

Year of construction: 1990, condition: new, Brand SKF Type 6202-Z/QE6 Hfodoqa Am Tepfx Ah Nsb Year of manufacture: Unused Weight (kg) approx. 9400 gross / 8780 net Number of pieces in stock 193.200 ( approx) Made in France Comments Contact us for min. quantity Verkoopcondities Contact us for min. quantity

Year of construction: 2010, condition: good (used), 3.piece ball screw ( from HURON BAZ ) make SCHNEEBERGER Diameter 63 mm Diameter 50 mm Hedpfx Ahsh I T Nro Nefb Diameter 40 mm In good condition.

Condition: used, 10 spacer rings with an inner diameter of 40 mm and a width of 10 mm. Image similar Sets available: 1 Price per set: €35.00 + VAT Hjdpfxoxmh Rhj Ah Nofb Inner diameter (d): 40 mm Outer diameter (D): 60 mm width: 10 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, SALA DFF02/B CNC Sphere Machining Transfer Machine + Integrated Conni Automatic Loading Saw Hjdpfx Ajx H T D Neh Njfb For sale: Italian-made SALA DFF02/B fully automatic sphere machining transfer machine, ideal for the valve and fittings industry. The machine is capable of processing both bar stock and forged brass parts and is equipped with an automatic loader system. Thanks to its capability for direct bar machining, it offers high material efficiency. Renowned for its reliability and precision, this model was thoroughly inspected and overhauled by the manufacturer SALA in 2011/2012 and is therefore in excellent working condition. General Features: Manufacturer: SALA Srl (Brescia, Italy) Model: DFF02/B Year of Manufacture: 2003 (Main Machine) Condition: Excellent functional state, overhauled. Technology: CNC Controlled System Application: Production of brass spheres, valves, and faucet components. Technical Specifications: Number of Axes: 10 Number of Stations: 8 Part Transfer: Linear manipulator (linear transfer) Machining Range (Bar Diameter): Can machine bar diameters up to a maximum of 1" (inch) Material Processed: Brass Parts Per Cycle: 2 Machining Capabilities: Drilling (3/4-way), re-drilling, rough machining, diamond finishing, angle chamfering, milling. Integration: Able to work with a Conni automatic loading saw for bar cutting operations. Other: Minimum lubrication and cooling system for tools, remote assistance adjustment available.

Condition: good (used), Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: Storage plate with ball casters, height-adjustable aluminum frame -Sheet: 1310 x 710 mm -Elevation: 940 - Dimensions: 1310/710/H940 mm -Weight: 43 kg Hfedpfx Aheupphgj Njb

Year of construction: 2019, condition: new, Brand C&U Group Shanghai Bearing Co Ltd Hjdpfx Ahsqa Anqj Nsfb Model: TM6307/41RS Year of manufacture: Unused Weight (kg) approx 6790 net Number of pieces in stock 17350 ( approx ) Made in China Comments Contact us for min. quantity Terms of sale Contact us for min. quantity

Condition: used, D: 70 mm diameter: 70 mm drilling: 50 mm length: total 340 mm d: 50 mm Hfsdpewmbtxofx Ah Neb L total: 340 mm

Condition: good (used), Ball screw with nut, transfer roller screw, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod Manufacturer: Rexroth Type: R150257086 -Type: 69115 40H -Thread diameter: 48 mm Hjdpfxecp Anpe Ah Nofb -Thread pitch, two-stage: 20 mm -Total length: 1995 mm -Weight: 26 kg