Used Automation for sale (12,996)

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Pjdetz Dkyjpfx Amkopt

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Ppedpfxowb E Sbo Amkot

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT Psdjxf Hm Sspfx Amkspt 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW

Condition: excellent (used), Year of construction: 2010, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. With 56 shelves, this results in a total storage area of ​​197.68 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 28,000 kg for all 56 shelves. Ppsdpfx Ajx E Aplsmkjt Manufacturer: Modula Year of manufacture: 2010 Model: Modula Lift ML 50D Height: 6900 mm Carrier width: 4100 mm Carrier depth: 857 mm Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 70000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 carriers/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 56 Can be shortened to 4900 mm Dismantling costs of over €6000 already included Item location: 37308 Geisleden Product video Product video 2 Datasheet: see Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new And used items – find them in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2013, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. With 58 shelves, this results in a total storage area of ​​204.74 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 29,000 kg for all 58 shelves. Manufacturer: Modula Year of manufacture: 2013 Model: Modula Lift ML 50D Height: 7350 mm Carrier width: 4100 mm Carrier depth: 857 mm Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 70000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 carriers/hour (depending on configuration) Pedpfx Amjx Ezxlokspt Height increments: 200 mm Storage grid: 25 mm Number of trays: 58 Can be shortened to 4700 mm Dismantling costs of over €6000 already included Item location: 37308 Geisleden Product video Product video 2 Datasheet: see Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2021, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. With 60 shelves, this results in a total storage area of ​​211.80 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 30,000 kg for all 60 shelves. Manufacturer: Modula Year of manufacture: 2021 Model: Modula Lift ML 50D Height: 6700 mm Carrier width: 4100 mm Carrier depth: 857 mm Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 80000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 carriers/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 60 Can be shortened to 4700 mm Dismantling costs of over €6000 already included Item location: 37308 Geisleden Product video Product video 2 Datasheet: see Documents tab Psdpfex Ey Avox Amkjpt Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new And used items – find them in our shop! International shipping costs on request!

Year of construction: 2020, condition: used, Manufacturer: Rocla Oy (Logisnext Group, Finland) Type: Automated Guided Vehicle (AGV) – counterbalanced model with bale clamp (AWTsc) Industrial Applications: Pjdpfxsw Ec Eas Amkjpt Automated handling of bales, rolls, pallets or cylindrical loads in paper mills, packaging plants, logistics hubs, and automated warehouses. Designed for 24/7 operation in narrow aisle and high-density racking systems. Main Technical Specifications: - Model: AGV AWTsc – 40TF8300E - Year: 2020 - Nominal capacity: - 3200 kg at 760 mm load center - 6400 mm lift height - Battery type: 420 Ah - Unladen weight: 4520 kg - Power supply: 24 V DC - Rated power consumption: 6.8 kW - Drive control: fully automated - Turning radius: compact for narrow aisles - Safety equipment: - 360° laser scanners - Obstacle detection sensors - Intelligent automatic braking - Control interface: centralized software-managed fleet system - Autonomy: ~8–16 hours (depending on battery configuration) Machine Usage The Rocla AWTsc is a heavy-duty AGV designed to handle bales or rolls without pallets using its integrated clamp. Its counterbalanced design enables rack access without side supports. It is ideal for environments requiring precise, repetitive handling of cylindrical loads and provides fully automated operation with zero human intervention. Features / Differentiators - Bale clamp attachment for direct roll/bale handling - Full autonomy with intelligent fleet control - High load and lift capacity (up to 3200 kg at 6.4 m) - Advanced safety package included as standard - Suitable for high-density and narrow aisle operations - Integrates easily with warehouse management systems (WMS)

Condition: ready for operation (used), B&R Automation 8MSA3M.E3-30 servo motor Rev. D0 SN:68320217821, used, normal signs of use, 100% functional, scope of delivery as per photos Ppjdpekwig Ujfx Amkot

Condition: ready for operation (used), B&R Automation 8MSA3M.E3-30 servo motor Rev. D0 SN:68320217820, used, normal signs of use, 100% functional, scope of delivery as per photos Pjdpfswta Iuox Amkept

Condition: like new (used), functionality: fully functional, Year of construction: 2023, degree of automation: automatic, laser hours: 2,800 h, laser power: 6,000 W, positioning speed: 280 m/min, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TruLaser 5030 fiber L76 6kW + LiftMaster Linear + Material Buffer small storage system BASIC MACHINE: TruLaser 5030 fiber (L76) Machine • Working area: 3000 × 1500 mm • Box-type frame • Longitudinal conveyor belt • Precision motion unit for high-accuracy processing • Gantry drive with linear direct drives • Process chiller for machine and laser (water/air) • Work area lighting • Pilot laser • Spraying system • Automatic nozzle cleaning • Integrated electrical enclosures • Integrated cabinet • Enclosed beam guidance via fiber optic cable (LLK) • Machine status indicator light • Transport and installation device TRUMPF laser • Pump diode excitation • Laser power regulation Cutting unit • Universal cutting head with fully adaptive lens system • Protective glass • Online condition monitoring for protective glass • Dynamic Focus Control • Automatic nozzle centering Control • Rapid post-production • SINUMERIK CNC • Ergonomic control panel with 21.5" wide-format multi-touch color display • Integrated technological parameters • Automatic shutdown • Programmable pressure/cutting gas selection • Microweld • Remote maintenance interface • Production planning • Multi-sheet processing • Condition Guide • Cutting Guide Functions • AdjustLine • BrightLine fiber • Smart Nozzle Automation • DetectLine • Drop&Cut • Integrated camera 1 for process monitoring • ControlLine • FastLine • FlyLine • FocusLine • NitroLine • PierceLine • PlasmaLine • Fusion Cut Performance Package • Highspeed Cutting Package • Copper Cutting Package • Brass Cutting Package Data transmission • USB port • RJ45 network interface • Online Update Manager Safety • CE marking and EC Machinery Directive compliant • Light barriers • Multi-chamber compact dust extraction unit • Electric rolling roof • Enclosed protective housing with certified viewing panels on both right and left sides Advanced standard configuration • Compact dust extraction • Mild steel slats • Laser powered via the machine • Automatic longitudinal pallet changer • Machine ambient temperature range 5-35°C / up to 45°C • Smart View MT ready • Data usage agreement • Nanojoints • Smart Rerun / Purchase • External solid-state laser TruDisk 6001 with BrightLine fiber OPTIONS: Highspeed Eco cutting package • High-speed cutting with reduced gas consumption Ppedpfx Ameyah Rceket Thick plate cutting package Prefilter for nitrogen and oxygen • Particle filtration for nitrogen/oxygen process gas lines, prefilter with external filter element Easy Filter • For annual maintenance of spent cooling water • Eliminates regular water changes Wireless Operating Point

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) Ppjdett Dqpepfx Amket SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 1-00 keyboard + 3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in photos. Ppedpsx Equ Nofx Amkot

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Base Machine - Dynestic 7521 20.6 Dynestic Table For classic nesting processing with wear plate Processing length 6250 mm (DYNESTIC 20.6 comes with additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles Gantry-type design Rack and pinion drive, helical-toothed, in X and Y directions, Ball screw spindle in Z direction for precise positioning Technical Data: The technical data refers to the DYNESTIC 7521 - 20.6 Please refer to the respective datasheets. Processing Dimensions: Max. workpiece size for trimming: X = 6250 mm Y = 2100 mm Max. travel distances: X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height on DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm from table surface (without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and observation window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system Windows XP 80 GB hard disk / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD writer) Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection required. Requirement: High-speed internet connection at the machine. DYNESTIC Table Fixed, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for fixing the wear plate 1 processing field with stop rails / stop Height 30 mm, pneumatically retractable 2 stop rails each in Y-direction and 1 stop in X-direction right side (from machine front edge perspective) Vacuum Fields Single-circuit vacuum system Drilling Unit 7976, 24 spindles Motor power 3.0 kW 18 vertical spindles, individually selectable Podpfjw I U Ecex Amkept L-shaped arrangement: 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on board thickness) Spindle extension stroke: 70 mm Rotation: Alternating right/left n(max.) 1000 - 5710 rpm steplessly adjustable Mounting: M10 thread - 11 mm fitting Without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction (Distance 32 mm between 1st and 2nd horizontal spindle) 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Max. total drill length 70 mm from mounting end Without tool, without holder Free slot 1 for: Optional double drilling spindle in X-direction or Vertical adapter with double pressing force Free slot 2 for: Optional saw in X-direction or Vertical adapter with double pressing force Milling Unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, two-stage feed stroke max. power at 12000 rpm to 24000 rpm Air-cooled with HSK-F 63 tool holder with right-hand rot...

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Automation system of the Wittmann brand was newly installed in 2016 and used on a Netstal Synergy 2000. All documents, operating instructions, maintenance plans, measurement diagrams etc. included as well as control modules, power supply units and control panels. The Wittmann Picker can be used as a stand alone. TECHNICAL DETAILS travel X / Y / Z: 900 / 1800 / 3000 mm payload: 15 kg Scope of delivery: robot, console, support V/2614-3104, adapter, conveyor system standard MB belt, SE protective enclosure incl. safety door with SIPA MACHINE DETAILS dimensions plant (LxWxH): 6560 x 4423 x 4154 mm Robot weight: 560 kg Mains connection: 3PH/N/PE mains voltage: 400 V tolerated voltage fluctuations: up to 10% connected load: 11 kVA frequency: 50-60 Hz tolerated frequency fluctuations: up to 2% Ppjdpfx Aepm Htgsmkjt supply line fuse: 16 A air pressure: max 6 bar maintenance of system functions: up to min 5 bar

Year of construction: 2001, condition: good (used), functionality: fully functional, Machine extensively overhauled worth EUR 18,000 Optional configuration QCRI 54/8: available, see pictures placement automation: available, see video Pressure flushing: 1 x through workpiece 1 x through electrode, 2 x lateral Suction flushing: 1 x through workpiece Central lubrication system automatically via NC in all axes TECHNICAL DETAILS Travel (X, Y, Z): 350, 250 300 mm Max man. Feeding speed: 900 mm/min Ppedpsn Arnxefx Amket Weight of electrodes: max. 20 kg Weight of workpieces: max. 40 kg Magazine configuration: 54/8 electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Plates: 8 pieces workpiece dimensions: (4x) 320 x320 x 270 mm, (4x) 320 x 320 x 170 mm work table: 500 x 400 mm T-slots: 3 x 12 mm distance of grooves: 125 mm Available clamping systems: Erowa IST 3R Macro Megatool GPS 70 MACHINE DETAILS Dimensions (H x L x W): 2400 x 1900 x 1690 mm

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed. Podjwgbw Rjpfx Amkopt

Year of construction: 2000, condition: excellent (used), Weinig High-Mech A4 bundling system Pjdoq Rvrbopfx Amkept Bundle forming packaging unit possible to combine with other Weinig outfeed handling systems available from stock such as buffers and stackers. Consisting of 1. Weinig 815-300 high speed bundling unit 2. Weinig 812-200 outfeed roller conveyor with crossfeed 3. Control panel with Siemens S7-300 CPU

Year of construction: 2010, condition: excellent (used), I sell the complete line for production of solid wood panels. Product size max. 2600X2100mm Podpfx Aog D Uuqsmkjpt Complete line consists of: 6-spindle Weinig Unimat fourside moulder Cross chain conveyor Automatic Glue spreading unit with cycle programming Entry table before the press Italpresse GB/13 Super Press size 2600mm (Parallel dimension / element length) x 2100mm (Cross dimension / Working width) Output table with rollers and cross chain outfeed conveyor Available as a complete line or sellable also separately. Because of that, the price is on agreement. Available immediately. Possible to test. Suitable also for another jobs. Products like parquettes, floor inputs, etc.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Fresenius Kabi Lovo Automated Cell Processing System PN: 6R4900 Condition: Used in excellent condition. Ppjdpjq Avtgofx Amket PROCESS FAST. MAXIMIZE CONTROL. Only Lovo delivers automated, functionally closed cell processing through spinning membrane filtration. Product Features: The Lovo Cell Processing System is a benchtop cell processor that automates labor-intensive tasks of washing and concentrating white blood cell products. Using spinning membrane technology, Lovo allows for non-pelletizing cell concentration and reduces the need for manual re-suspension. Additional Features: Processing volume range: 1 mL to 21 L Operator-defined processing parameters including levels of supernatant removal and final product volume. The LOVO system is for laboratory use only. Cells processed on this system are not intended for diagnostic purposes, for direct transfusion, or for use in the production of a therapeutic product(s) or vaccine(s) for clinical use, unless the user has obtained advanced regulatory clearance or approval from the appropriate regulatory agency. Cell types Fresh, cryo-preserved, and culture-expanded white blood cells, including, but not limited to, leukapheresis CD34+ cells, CAR T-cells, TILs, NK cells, and MSCs Volume range Source Up to 22 L Output* 50 mL – 50 L Wash-out range Up to 99.9999%* System components • 73 lb, 35.3” x 17.6” x 24.5” (W x D x H) benchtop instrument • Single-use processing kit with spinning membrane module We have two units in stock, both fully functional. Password need to be changed. Please check out our other listing as well.

Condition: good (used), Year of construction: 2005, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, BYSTRONIC, RB-NTB-2.20x4.00-L-AL Autom. Frame Bending Machine Bystronic / Lenhardt Max. frame dimensions: 2200 x 4000 mm Ppjdexyk R Ropfx Amkst Profiles: aluminum and TGI (the machine is not built for TGI but it works ok.) Inkjet printer Domino A520i and bending tools included. Connection: 3/N/PE-50 Hz, 400V, 6 kW | Year: 2005. In good technical condition. Available: NOW

Condition: new, Frequency converter Psdpfxohqhx Ts Amkopt Manufacturer: Danfoss Typ: VLT Automation Drive - FC-302P1K5T5E20H1 Max. Power: 1,5 kW Input: 3x380-500V, 50/60 HZ, 3.7/3.1 A Output: 0-100 HZ, 4.1/3.4 A

Condition: new, Frequency converter VLT Automation Drive Manufacturer: Danfoss Typ: FC-302P3K0T5E20H1B Ppjdpfx Ashqh Hpomkot Input: 3x380-500 V, 50/60HZ, 6.5/5.7A Output: 0-590HZ, 7.2/6.3A

Condition: new, Frequency converter Manufacturer: Danfoss Ppjdohukxqopfx Amkot Typ: VLT Automation drive Model code: FC302P1K5T5E20H1XGXXXXSXXXXA0BXCXXXXD0 (P1K5) 1.5 KW / 2.0 HP, Three phase 380 - 500 VAC, (E20) IP20 / Chassis

Condition: used, functionality: fully functional, Leica ASP300 Automated Vacuum Tissue Processor. This advanced solution combines cutting-edge features and a user-friendly interface, redefining routine clinical and research histopathology applications. With an innovative touch-screen display, smart reagent compatibility monitor, and customizable cleaning programs, the ASP300 ensures optimal processing conditions and sample quality. Enhanced security, remote fill and drain capabilities, and a maximum capacity of 300 cassettes guarantee efficiency and reliability. Discover an intuitive user experience through the solvent-resistant color touch-screen display of the Leica ASP300. Its user-friendly interface guides you seamlessly through each step, ensuring hassle-free operation. The graphical process representation displayed on the touch-screen adds a visual dimension to your workflow, enhancing clarity and control. Psdpfxoupv Nke Amkopt Experience the innovative reagent compatibility monitor that ensures your reagents are perfectly suited for the task, minimizing errors and maximizing efficiency. Instrument performance control (QC) is integrated to maintain top-notch performance standards, guaranteeing consistent results with each processing cycle. The ASP300 Tissue Processor introduces a remote fill and drain system, further simplifying your laboratory operations. With four pressure vacuum options – P/V, P, V, and ambient – you have the flexibility to choose the ideal setting for your specific needs, optimizing processing conditions. Customize your workflow with four user-defined cleaning programs, adapting the processor to your laboratory’s requirements. The active paraffin cleaning program ensures the longevity of your paraffin, prolonging its service life and enhancing cost-efficiency. Good working condition. Please check out our other listings as well.

Year of construction: 2019, condition: used, functionality: fully functional, Miltenyi Biotec Clinimacs Prodigy Automated Cell Processing System. Dimensions 73.5 cm × 40 cm × 48 cm (w × d × h) Weight approx. 70 kg Input voltage 100–240 V~ Power consumption 810 W Frequency 50/60 Hz Pump speed 2–400 mL/min Atmosphere control Gas mix unit for CO2, compressed air, and N2; min. pressure: 1 bar, max. pressure: 2.5 bar Temperature control +4 °C to +38 °C Centrifugation Max. 2,500 rpm (400×g) Microscope camera Max. magnification: 400-fold Monitor 10.1” TFT touchscreen MACS tube sealer For sealing CliniMACS Prodigy Tubing Sets PVC tubes Ppodpfxjttwx De Amkjt Types of starting material Leukapheresis, bone marrow, cryopreserved PSCs Available cell processing steps Cell washing, density gradient centrifugation, cell activation, fluorescent antibody labeling of cells, cell depletion and / or enrichment via magnetic cell separation, viral transduction, cell expansion, expansion and differentiation of adherent cells, cell culture and medium exchange, formulation of final cell product Tubing Sets and accessories Dedicated CliniMACS Prodigy Tubing Sets and Accessories available IPC/QC Integrated IPC/QC sampling pouches allow sterile sample removal Manufacture and availability Manufactured in Germany and shipped worldwide. Good working condition. Please check out our other listings as well.