Used Automation for sale (13,337)

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Ncsdpfx Amoux Shvsyow Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Ncodpfsxrgvmox Amyew Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24VDC power supply). - REO controller type REOVIB R6 / 439 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses - Mounted on base frame made from aluminum profile system Required space Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which the parts are aligned 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations and thereby moves the parts.

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibration bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Bowl internal height: approx. 70 mm Sorting track width: 30 mm Total height (drive + bowl with sorting track): 390 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - RNA control unit, type ESG 90 for adjustable vibration speed - Vibration bowl with rubber lining - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 50 kg Good condition A bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates mechanical vibrations in the sorting bowl to move the parts. Ncjdpfeuqrahjx Amyow

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition Nodpou Ailgofx Amyscw A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 68086, Machine can make rolls with paper core. And Coreless rolls (Without cardboard tubes) Semi-Automatic Coreless Prestretch Rewinding Machine Specification • Maximum parent roll diameter 500mm • Maximum web width 600mm. Master roll core 76mm diameter. 4 roller stretcher train geared to give a stretch of 335% • Servo driven rewind to vary collection tension from 240% to 335%. Adjustable external electronic rewind Variable speed drive up to 450 meters per minute. • Single position coreless rewind station for either 50, 60 or 76mm ID rolls. (with change parts) • Programmable electronic roll length counter. Maximum rewind roll diameter 250mm. Slitting blades for multiple finished roll winding (with change parts) Rolls can be produced with or without oscillation and edge guiding Film break sensor. 3 - phase 400 volt supply. / Air requirements - 4 cfm max. at 80 psi. Guarding to suit current C.E. requirements Ncsdpfx Asxpq T Rsmysw

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Nedsxvxqdepfx Amyjcw Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Condition: new, B&r ps 794 power supply module b&r br-automation 2005 ps 794 0gh-ps794 5vdc 24vdc input: 230v ac, 0.4a 8-30vdc weight: 620 gm Nsdpsh Ruldsfx Amyjcw

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Nsdpem H Uqkefx Amyjcw

Condition: ready for operation (used), Year of construction: 2001, With documentation, an inspection is possible. Ncodpfxef Ddrls Amyjw

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Nedpfxem Nckfe Amyocw

Condition: excellent (used), Year of construction: 2009, Robot GHS-Automation Type: SL 25/Easycontrol Year of manufacture: 2009 Nsdpeff Hdtofx Amyecw Electrical cabinet

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Nedex Elfcepfx Amyecw Coil conveyor WFL 200 IU (200 mm) with singulator Aluminum chassis with plexiglass enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: new, Manz Automation aico.panel 80036808 Touch-Panel 19" aico.box.IPC V2 81009594 Set Item condition: New as shown Possible traces of storage, installed but not put into operation. Type: aico.panel Art-No.: 80036808 24VDC/2A Type: aico.box.IPC V2 Art-No.:81009594 REV: 2.1; 100-240 VAC / 4-2A; 50/60Hz Incl. accessories 30kg Further articles - new and used - you will find in our store! International shipping costs on request! Njdpfx Amepug Aysyscw

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. Nedpfsibichjx Amyjcw The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Year of construction: 2001, condition: ready for operation (used), Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods. Njdpetqtw Uofx Amyscw

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: Zeroclamp Zerobot 100P automation system, commissioned in 2015. (Perfectly suited for a Haas UMC 750, but also compatible with other machine types.) This automation system allows for either vice handling or raw part handling. Offers completely flexible configuration options. Large workpiece storage for many raw parts (fully customizable). Compact footprint. Features: * Various mounting plates for raw part handling * Raw part gripper * Second rack for increased part capacity Nodpfx Aoyk D Dysmyecw * and much more This solution enables both raw part and clamping device handling. There are numerous possible applications, and we are happy to provide advice.

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Nodpfxsydd Acs Amyocw

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. Nsdpfx Aeya H S Sjmyscw The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Ncjdpfxsx Elkfj Amyew Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, Year of construction: 2021, 3 units of driverless transport systems, SAFELOG. AGV M4 – used: Price per unit: €12,500.00 (net)! Manufacturer: SAFELOG GmbH Type: AGV M4 Year of manufacture: 2021 Includes inductive charging station and wireless station Manufacturer data: Forward and reverse travel possible Wear-free charging during the process using an inductive charging system Scalable battery capacity with LiFePo4 batteries to adapt to process requirements Flat design with only 220 mm height – ideal for driving under 7” touch display for easy operation Agent-based control for communication between AGVs and their environment Electric lifting pin for automatic pickup and release of trailers Nodpszpf Rwofx Amyocw up to 1.5 t Travel speeds from 0.02 m/s to 1.6 m/s Hybrid navigation consisting of magnetic track, contour navigation, camera navigation, and odometry Safety laser scanner in each direction of travel Technical data Designation SAFELOG AGV M4 Article number 106148 Electrical data Operating voltage AGV [V] 24 DC Charging time with inductive charging system (with 1 / 2 / 3 / 4 batteries) [min] 30 / 40 / 60 / 80 * Capacity (with 1 / 2 / 3 / 4 batteries) [Ah] 21 / 42 / 63 / 84 Operation Temperature operating range [°C] 5 - 35 Positioning accuracy [mm] + / - 5 * Min. turning radius [m] 1 Maximum speed (with trailer/without trailer) [m/s] 1.0 * / 1.6 * Continuous operating time without load (with 1 / 2 / 3 / 4 batteries) [h] 4 / 8 / 12 / 16 * Mechanical data Housing material Steel Dimensions (L / W / H) [mm] 1460 / 450 / 220 Weight AGV [kg] 235 Max. payload AGV (top load) [kg] 200 * Max. towing weight (trailer) [kg] 1500 * Condition: good Available: immediately Location: Erfurt area, later warehouse Frankenberg / Saxony

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 5AC800.EXT1-00 keyboard + 5AC800.EXT3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ncsdpsx Equ Nefx Amyow

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 35,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 1260x490 mm, with an impressive spindle speed of up to 36,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details. • Table size: 1260x490 mm Ncsdpfx Amjyizugeyew Additional equipment • incl. EROWA Robot Multi automation • Item 20 (Article No. 3391-176): 1 Pc. Continuous Path Control Heidenhain iTNC 530M (Standard Base Version) Item 30 (Article No. 3360-181): 1 Pc. Software Option 1 for iTNC 530M (Rotary table machining in mm/min, programming of contours on the cylinder surface, tilting of the working plane, including circular interpolation in 3 axes) Item 40 (Article No. 3360-182): 1 Pc. Software Option 2 for iTNC 530M (3D machining: smooth movement, 3D tool compensation, TCPM, 5-axis linear interpolation, splines, block processing time 0.5 ms) Item 50 (Article No. 3391-211): 1 Pc. Standard Clamping System Item 60 (Article No. 3390-220): 1 Pc. Machine Table 1260x490 with 9 T-slots 12H8, 50 mm distance Item 70 (Article No. 3391-240): 1 Pc. Tool Changing System with 28 magazine slots HSK-E50 Item 80 (Article No. 3390-270): 1 Pc. Side Enclosure of the machining area made of stainless sheet metal, with wide-opening sliding doors at the front and polycarbonate panes. Incl. 2 anti-stroboscopic lights. Right side door manual or optional automatic opening. Item 90 (Article No. 3390-272): 1 Pc. Right Side Door with window, lockable Item 100 (Article No. 3390-275): 1 Pc. Automatic Enclosure Door left to P90 for workpiece loading. Incl. 2 pneumatic cylinders, guides, control valve and control circuit for CNC control. Item 110 (Article No. 3390-288): 1 Pc. Full Enclosure of the machining area towards top (32/28 tools), with lockable recess for loading crane. Item 120 (Article No. 3360-506): 1 Pc. Extended Energy Saving Function via electronic timer. Automatic standby switching of machine drives after completion of NC programs and restart of the plant. Item 130 (Article No. 3360-842): 1 Pc. Oil Mist Extraction System for machining area Item 140 (Article No. 3390-851): 1 Pc. Standard Coolant System 3 bar / 30 l/min with 2 submersible pumps, chip drawer, additional fine chip filter insert and stretch mesh filter. Coolant tank 240 l capacity. Item 150 (Article No. 5130-101 Special): 1 Pc. Preparation for Minimal Quantity Lubrication system. Hoses routed through machine head to spindle. Switchable via M-functions. Item 160 (Article No. 3363-872): 1 Pc. 3D Touch Probe System Renishaw MP 40 incl. spindle insert HSK E50, touch stylus Ø 6 mm, signal transmission wireless via infrared system. Self-calibrating with 360° radiation. Item 170 (Article No. 3390-877): 1 Pc. Laser System NT for high-precision measurement and monitoring of tools D 0.15 to 63 mm. Cycle-supported measurement of diameter and length as well as contour stability. Includes automatic alignment and checking of CNC tool table. Item 180 (Article No. 3360-918): 1 Pc. FEHLMANN HSC Settings (Cycle 327) for dynamic optimization of digital axis drives. Item 190 (Article No. 4875-114): 1 Pc. Automatic CNC Indexing and Swiveling Unit ATS 160 CNC-SDKD--ITSPC in digital execution with Erowa quick-clamp chuck ITS Power Chuck. Center height: 160 mm. Swivel range: +18° to -5°. Max. workpiece diameter: 300 mm. Max. workpiece weight: 50 kg.

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: SIEMENS, controller model: 840, overall weight: 11,500 kg, number of axes: 5, This 5-axis Gleason PFAUTER G320 CNC + Promot Automation was manufactured in 2001. It features a Siemens 840 control unit, a maximum workpiece diameter of 380 mm, and a module range of 0.5-7.0. The system includes Promot Automation handling, a robotics system, and a cooling belt system. If you are looking to get high-quality gear grinding capabilities consider the Gleason PFAUTER G320 CNC machine we have for sale. Contact us for more information about this machine. • Operator panel: included • Module range: 0.5–7.0 • Workpiece diameter: min 10 mm, max 380 mm • Number of teeth: 10–600 • Axis travels: Z (vertical) 200 mm; X (horizontal) 230 mm; Y (tangential/shift) 135 mm • Clamping head swivel (A): ±45° • Tailstock stroke: 125 mm • Dressing travels: V (tangential) 180 mm; U (radial) 110 mm • Grinding wheel speed: up to 3000 rpm, stepless • Linear axis speed: 10,000 mm/min • Max. table rotation speed: 240 rpm • Table resolution: 0.001° • Feeds: machining and working feeds stepless • Grinding wheel dimensions: diameter 270–350 mm; width up to 104 mm; bore 160 mm • System weight: approx. 11,500 kg • Space required (machine): approx. 3.7 m × 2.4 m × 2.75 m Additional equipment • Promot Automation handling unit (robotics handling) • Operator panel/handheld (for automation) • Conveyor belt Ncsdpfx Amjyf E R Djyjw • Cooling belt system • Hydraulic unit • Space required (automation): approx. 4.5 m × 1.6 m × 4.0 m • Accessories as shown in photos

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2795, power of the servo motor: 750 W, input voltage: 230 V, pneumatic connection: 7 bar, For sale is a high-performance Brother automated sewing unit equipped with a JAM TC 762 F automation module, offered as a complete industrial workstation. This system is specifically designed for automated pocket setting and precision sewing operations, making it highly suitable for denim, trousers, and workwear production. The integrated automation module enables accurate material positioning, clamping, and repeatable stitching cycles with minimal operator input. The unit combines a heavy-duty Brother sewing head with JAM International automation technology, delivering consistent production quality and significantly improved efficiency compared to manual processes. The machine has been used in a professional garment factory environment and was fully operational until factory shutdown. The unit has also been video recorded in full working condition on 01.04.2026. Key advantages: • Automated pocket setting and J-stitching • High repeatability and production consistency • Reduced labor dependency • Suitable for continuous industrial production • Complete workstation ready for integration • Production Capacity: Approximately 2,600 pockets per 8-hour shift. • Maximum Speed: Operates at up to 3,600 RPM. Njdjy Inyhepfx Amyocw • Quick-Change System: Features a pneumatic mold change system, allowing for fast transitions between different pocket sizes and styles. • Versatile Operation: Capable of both semi-automatic and fully automatic modes, handling both pre-ironed and unironed pockets. Includes: • Brother automated sewing machine head • JAM TC 762 F automation module (material handling and positioning) • Electronic control system (TC 762 interface) • External PC workstation (monitor, keyboard, control unit) • Pneumatic system with regulators • Dual foot pedal controls • Industrial table and heavy-duty frame • Safety guards and integrated lighting • Fabric support and output handling system Technical details: • Manufacturer: Brother Industries, Ltd. (Japan) • Automation module: JAM International TC 762 F (Italy) • Type: Programmable automated sewing workstation • Power: 220V • Pneumatic system required • Integrated control and external PC operation Condition: • Used industrial condition • Fully operational prior to factory shutdown • Video recorded in operation (05.03.2026) • Maintained and serviced, latest maintenance 27.02.2026 • Typical signs of use consistent with production environment • Sold as-is, where-is, without warranty Typical applications: • Automated pocket setting • Denim and trouser production • Workwear manufacturing • Reinforcement stitching • Repetitive precision sewing operations Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2014, load capacity: 1,520 kg, lifting height: 3,800 mm, fuel type: electric, mast type: duplex, For sale is an automated guided vehicle (AGV) from the manufacturer Euroimpianti, type LGV. The item is in used condition. Manufacturer / Brand: Skilled / Euroimpianti S.p.A. Machine type: LGV Serial number: 3138 Year of manufacture: 2014 Rated voltage: 48 V DC Max. oil pressure: 15 MPa Max. lifting height: 3800 mm Load capacity: 1500 kg Battery weight (traction): 640 kg Unladen weight without battery: 2070 kg Max. load dimensions: 1075 x 500 x 235 mm Rated power: not specified CE marking: present Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Inspection is possible by appointment. Contact us, and our team will be happy to assist you. Njdpfx Amjzl Akasyocw Trade-in or exchange is possible! Machine purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.