Used Servo for sale (3,802)

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. Hnedpfx Ahsmk S Sle Nog In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: ready for operation (used), Servo-driven tapping and threading machine, Used machine Manufacturer: Electric Servo Hsdpfx Aoxdfaujh Njng Model: M12H Dimensions: Width: 700 mm Depth: 150 mm Height: 520 mm Radius: 1100 mm Comes with Tap Torsion GT 12-0316 chuck set: 3.5 × 2.7 M3 4.5 × 3.4 M4 8 × 6.2 M8 M6-8 Torsion u-6.3 M5 Torsion u-5 M10 Torsion u-8 M12 Torsion u-9

Condition: used, TECHNICAL DETAILS * Spindle speeds : 200-20000 [rpm] * Travel : 38 [mm] - Distance table/spindle axis : 89 [mm] - Table dimensions : 182 x 300 [mm] - Machine height : 342 [mm] EQUIPMENT - Collets set Hnjdpouhab Hefx Ah Njg

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SCV-40-G8-6-KW3, total width: 406 mm, overall weight: 4,000 kg, control voltage: 400 V, sheet thickness steel (max.): 6 mm, Completely new machine, never put into operation due to failed work. Motorized unwinding unit with loading carriage. Electric feeder (AE400). Drive (motor) + control from SIEMENS. The measuring roller is located in the front of the machine, which monitors the correct feed with an accuracy of +/- 0.1 mm. The unit complies with CE standards. Coil weight: 4,000 kg Coil width: 406 mm Hedpev Dumbofx Ah Nsng Coil outer-inner diameter: Ø1400 mm - Ø508 mm. Material thickness: 0.6mm - 6mm Voltage: 400 V - aux 24V

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle (max.): 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. Hnjdpfxev Hchlo Ah Nsg 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: new, functionality: fully functional, Year of construction: 2025, throat depth: 400 mm, warranty duration: 24 months, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Hnsdpfx Aewzqx Hjh Neg Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,910 mm, total width: 900 mm, total length: 650 mm, pressing force: 150 t, table width: 900 mm, table length: 650 mm, operating speed: 220 mm/s, overall weight: 6,000 kg, reverse speed: 220 mm/s, ram plate width: 750 mm, ram plate length: 500 mm, working height: 950 mm, stroke length: 400 mm, pressure: 290 bar, pressing speed: 8 mm/s, Equipment: documentation/manual, safety light barrier, TECHNICAL DATA: Force: 150 t Motor power: 11 kW Cylinder stroke: 400 mm Variable working speed: 8 - 0 mm/sec Approach speed: 220 mm/sec Return speed: 220 mm/sec Working pressure: 290 bar Table size: 900 x 650 mm Ram size: 750 x 500 mm Open height: 650 mm Working height: 950 mm Width: 1,360 mm Depth: 2,135 mm Height: 2,910 mm Weight: 6,000 kg We have developed motorized screw pumps of the CR/SERVO series with low energy consumption and energy savings of up to 60%. These were specifically designed for tasks that require high production output in the fields of stamping, drawing, and punching. The latest generation CR-SERVO presses have been advanced for versatile applications, including the option to integrate these units into automatic production lines. FRAME STRUCTURE: The steel frames of this series are made from a fully welded structure manufactured exclusively from S355JR grade steel. They are stabilized and machined after welding to ensure perfect parallelism and precision. The design and calculations are performed using finite element software to guarantee our high standards of precision and quality. They feature upper and lower table/ram platens made of C45E steel, fitted with T-slots according to DIN 650. The upper plate ensures perfect parallel alignment via two side guides with a 50 mm diameter and maintenance-free bearings. HYDRAULICS: Single-acting main cylinder with a guide bush, chrome-plated piston and maintenance-free wear-resistant guides. For fast approach and rapid return, two side-mounted double-acting cylinders have been installed, enabling quick movement with chrome plating and guidance. REXROTH hydraulic unit with servo motor and prefill valves, including prefill valve for approach and return, and pump with constant output and constant speed operated via the servo motor system, check valve, pressure relief valve, spindle shutoff valve and air cooling. Hedpewkvktofx Ah Nsng ELECTRICS: Standard equipment includes a SIEMENS PLC model SIMATIC S7 1200 and a 7” touchscreen panel model MPT-700. This allows for programming of force, stroke, and speed, with capacity for storing up to 300 programs. The electrical and hydraulic valves are redundant and automatically controlled. An additional safety block and autodiagnostic devices for valve and safety monitoring are included. Inspection and certification of correct function and safety distances for light curtains is performed. Operation is via a low-voltage electric foot pedal. To ensure operator safety, there are type 4 PLe electrical safety interlocks in the front working area, two hinged side safety guards with safety valves, and internal LED lighting. Complies with all essential safety and health requirements according to CE standard.

Condition: ready for operation (used), Year of construction: 2019, A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats diameter/height: 42.4mm/17.15mm, 50mm/12mm. 6) Can and bottle labeler IMA Sensitive 350, year of construction: 2009, labeling capacity: 350 labels/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot stamping Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and bottle cartoner Uhlmann C100, year of construction: 1988, cartoning capacity: 70 cans/min, max. Can/bottle diameter and height: 60mm/120mm, folding carton length range: 30mm-113mm, folding carton width range: 15mm-85mm, folding carton height range: 70mm-130mm, the machine was converted to cans and bottles in 2017 and equipped with a Mitsubishi D700-SC control system, including GUK Cartonac 91 folder, 3x code reader and luminescence control. 8) Wipotec TQS-HC-A coding and inspection device for serialization, temper evident and weighing, year of manufacture: 2017, inspection capacity: 300 products/min, including 2x Herma 400 label dispenser, dual print head (2 cartridges), camera for print inspection, load cell with weighing belt and hand scanner. 9) Christ FilmTeq 3030 banding machine, year of manufacture: 2011, infeed capacity: 50-200 folding boxes/min, outfeed capacity: 7-50 packs/min, folding box length range: 15mm-400mm, folding box width range: 15mm-90mm, folding box height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, bundle height range: 30mm-230mm. Documentation available. On-site inspection is possible. Hnedpjwa Tixsfx Ah Nog

Condition: new, Year of construction: 2024, chamfer lenght 0900 mm distance between columns 900 mm pressure 20 t column arm 230 mm stroke length max. 150 mm Hsdpfxswp Ti Re Ah Nsng travel -x axis 350 mm

Condition: like new (used), functionality: fully functional, Fanuc A06B-0501-B205#7000 AC servo motor Spare parts for sale Spare part condition: - unused Warranty: - no Payment conditions: - payment in advance Delivery: - packed in wooden box Hjdpjv Ah Ivjfx Ah Nsng - ex Works - excl. delivery cost #Servo motor #drive motor

Condition: good (used), Servo motor, geared motor, electric motor -Manufacturer motor: Siemens type 1FK7042-5AF71-1SGO -Voltage: 267 V Hsdpfx Ahohyutue Njng -Torque: 3.0 / 2.6 Nm -Speed: 9000/3000 rpm -Manufacturer gearbox: alpha type LP 090-M02-30 -111-001 -Translation: 1:30 -Shaft: Ø 22 x 35 mm -Construction: B14 -Dimensions: 345/95/H143 mm -Weight: 10.1 kg

Condition: new, Year of construction: 2024, chamfer lenght 0900 mm distance between columns 900 mm Hedjwp Th Hspfx Ah Neng pressure 20 t column arm 230 mm stroke length max. 150 mm travel -x axis 350 mm

Condition: good (used), Motor spindle, milling spindle, motor spindle, AC spindle motor, electric motor, DC motor, servo motor, milling motor -Application: Milling/Drilling -Motor spindle: was tested on a robot -Operating hours: 4350 hours -Motor spindle: 55 kW -Servo inverter: Lenze Servo Drives 9400 -Recording: HSK32 -hydraulic tool clamping OTT Type: 95.102.779.0.2 V01 Hnsdpodntf Hefx Ah Neg -Spindle cooling BKW type: WRK07/PC41 -Control cable -Dimensions of control cabinet: 1118/800/H2430 mm -Weight: 694 kg

Condition: good (used), Year of construction: 2011, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-0269-B400 -Power: 5.5 kW -Speed: 3000 rpm -Technical data: see photo type plate -Shaft: Ø 35 x 75 mm -Dimensions: 360/175/280 mm -Weight: 30 kg Hnsdpfowvfgnox Ah Nog

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Controller MOD13/1X0331-486 -Contr: TD M3 ..- 020-300-WO -Component: from a DMT CD 480 lathe -Dimensions: 320/70/H390 mm -Weight: 6.5 kg Hodpfxefrlt Re Ah Nong

Condition: good (used), Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: SEW-Eurodrive, Servomotor Permanent Magnet Motor -Type: CFM71L/TF/RH1M/SM50 -Speed: 0 - 3000 rpm -Voltage: 400 V -Shaft: Ø 19 x 35 mm -Technical data: see photo of the type plate Hnedpem Sk Hvofx Ah Neg -Number: 3x servo motors available -Price: per piece -Dimensions: 350/117/H190 mm -Weight: 11.8 kg/pc.

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller, servo module -Manufacturer: Bosch, servo module -Type: SM 4.7/20-GC16 T161-902 -Un: 325V DC Hnsdpfx Ahshagpco Njg -Dimensions 250/60/H260 mm -Weight: 2.3 kg

Condition: good (used), servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: Isoflux, servo motor with encoder -Servo motor: Type 544,4,25,98/90 -Speed: max: 2500 rpm -Voltage: 96 V -Shaft: Ø 16 x 50 mm -Bolt circle: Ø 130 x 10 mm -Protection class: F -Encoder: Heidenhain ROD 426 1000 -Dimensions: 490/127/H150 mm -Weight: 14.9 kg Hnedpfxjww Twqs Ah Neg

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply, servo amplifier -Manufacturer: Hauser, servo controller servo amplifier 2 pieces with rack -Type: HBV 750 SEO HBMR 55 A4-445 -Price/charge: complete Hjdpfen Nbmtjx Ah Neng -Total dimensions: 390/250/H310 mm -Weight: 8.4 kg

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor Hnedpexr A Avefx Ah Njg -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7083-2AF71-1RG0 -Voltage: 308 V -Speed: 3000 / max: 6000 rpm -Gearbox: Wittenstein SP 100S-MC1-4 -1K1-2K i= 4 -Shaft: Ø 32 x 60 mm -Number: 5x geared motors available -Price: per piece -Dimensions: 450/155/H200 mm -Weight: 25.1 kg/pc.

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: SEW-Eurodrive, servo geared motor with brake -Type: WF37 CMP50M/BK/DI/PK/AZ2Z/SD1 Hnjdpfx Ahoxt D Hxe Nsg -Motor: Speed: 4500 / max: 9000 rpm -Gearbox: i= 18.94 -Shaft: Ø 20 x 40 mm -Protection class: IP65 -Brake: 2.4 Nm -Technical data: see photo of the nameplate -Number: 5x geared motors available -Price: per piece -Dimensions: 455/180H170 mm -Weight: 10.5 kg/pc.

Condition: good (used), Geared motor, electric motor, electric geared motor, three-phase synchronous motor -Manufacturer: Sew-Eurodrive, geared motor servo motor Hnedpfxjg A I Efj Ah Nog -Gearbox: Type KHF47/A 11 rpm i 131.87 -Motor: Type CMP71S/PK/RH1M/SM1 -Speed: 0 - 2000 rpm -Design: B5 -Hollow shaft: Ø 35 x 175 mm -Protection class: IP 65 -Dimensions: 600/205/H210 mm -Weight: 33 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: Andrive, Servo Drive Type A4 ZAM 006 -Number: 3x servo module available -Price per piece Hnjdpfehu Hwxsx Ah Neg -Dimensions: 310/220/H105 mm -Weight: 5.7 kg/pc.

Condition: good (used), Year of construction: 2011, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-0269-B100 -Power: 5.5 kW Hsdpfjwvfgzex Ah Nong -Speed: 3000 rpm -Technical data: see photo type plate -Shaft: Ø 35 x 75 mm -Dimensions: 320/175/280 mm -Weight: 23 kg

Condition: good (used), servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: Isoflux, servo motor type 544,4,25,96/13 -Speed: max: 2500 rpm -Voltage: 96 V -Shaft: Ø 16 x 50 mm -Bolt circle: Ø 130 x 10 mm Hodpfx Ahewwqi Re Neng -Protection class: F -Dimensions: 500/128/H150 mm -Weight: 16 kg