Used Automatic Rigid Box Making Machine for sale (85,563)

Condition: used, Year of construction: 2008, Roll production line König Classic Rex Combiline 800 This system is currently being refurbished (the photos are from the bakery). Kdjdpfjz A Slfsx Ah Eot Suitable for the production of round, oval, and stamped rolls, as well as other dimpled rolls. Year of construction: 2008 Dough divider and rounder, type: Classic Rex T6 Proving cabinet, type: Combiline 800 Weight range: 45–100 g (stamp size: SK 61) Capacity: max. 9,000 pieces/h Pre-rolling for oval products before feeding into the proving cabinet Proving cabinet with climate control (temperature, humidity) Side discharge conveyor for subsequent production (e.g., downstream wrapping machine) Stamping station including 2 stamping dies (Kaiser and salted rolls) Deposition machine for baking trays up to a maximum length of 100 cm.

Condition: used, Year of construction: 2009, Roll production line WP Multimatic MUS Rollmeister SC 51 Kdedsz A Sd Ijpfx Ah Est Year of manufacture: 2009 Suitable for sliced rolls, round rolls, and long rolls Maximum hourly output: approx. 5,100 pieces Weight range (without proofing): 30-90g Weight range (sliced rolls): 40-65g Pre-proofing cabinet I (before long rolling): 6 minutes Pre-proofing cabinet II (after long rolling, before cutting): 6 minutes Dough divider and rounding machine Multimatic MUS, 4-row Pressure roller on spreading belts after the head machine Long rounding station Pressure roller before the cutting station, height-adjustable Cutting station Bypass for green operation without proofing cabinet Discharge device for Euro pallet sizes With heating and humidification With tunnel dryer

Condition: used, Year of construction: 2004, Roll production line König Mini Rex G2000 Year of manufacture: 2004 Compact system G2000 with Mini Rex 4000 heading machine Compact proofing cabinet with an hourly output of approximately 2,500 pieces For higher output without proofing cabinet operation, Mini Rex, swiveling, up to a maximum of 4,000 pieces/hour Weight range: 35-85 g Dough divider size: SKG58 and RK58 Dough dividers for round and square rolls Kodpfx Aoz A R Apsh Esdt Lateral discharge conveyor Proofing time approx. 6 min at an output of 2,000 pieces/hour Dough rounding unit incl. one dough rounding tool of your choice, subject to availability Integrated infeed and long roller

Condition: used, Year of construction: 2005, Roll Production Line König Mini Rex G2000 Kjdpfez A Sh Hsx Ah Eedt Year of manufacture: 2005 Compact system G2000 with Mini Rex 4000 forming machine Compact proofing cabinet with an hourly output of approximately 2,500 pieces For higher output without proofing cabinet operation, Mini Rex, swiveling, up to a maximum of 4,000 pieces/hour Weight range: 35-85 g Dough divider size: SKG58 and RK58 Dividers for round and square rolls Lateral discharge conveyor Proofing time approx. 6 minutes at an output of 2,000 pieces/hour Dough rounding unit including one dough rounding tool of your choice, subject to availability Integrated infeed long roller

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Kdedewd Emwjpfx Ah Eot Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached.

Condition: used, Year of construction: 2013, Roll forming line König Artisan SFC Year of manufacture: 2013 Ksdpfez A Smpsx Ah Eodt Condition: functional, bakery condition Suitable for the production of ciabatta and square rolls Hourly output: max. 300 kg of dough Dough belt height: min./max. 12mm/32mm, depending on the dough Dough belt width: 170 mm Dough belt flour applicator for the top and bottom sides Guillotine and punch for a wide range of products Touch panel with recipe management Molder with water bath, type: MOC-C300 Includes 3 cutting rollers for 1 to 4 row operation Includes 1 punching tool of your choice, subject to availability

Condition: used, Year of construction: 2002, Roll production line König Mini Rex G2000 Year of manufacture: 2002 Compact system G2000 with Mini Rex 4000 forming machine Compact proofing cabinet with an hourly output of approximately 2,500 pieces For higher output without proofing cabinet operation, Mini Rex, swiveling, up to a maximum of 4,000 pieces/hour Weight range: 35-85 g Die size: SK63 and RK58 Dies for round and square rolls Lateral discharge conveyor Proofing time approx. 6 minutes at an output of 2,000 pieces/hour Dough divider included, with one dough dividing tool of your choice, subject to availability Kdedpfxez A Sfxe Ah Eot Integrated impact roller for shaping

Condition: used, Year of construction: 2002, Roll production line König Mini Rex G2000 Year of manufacture: 2002 Kjdsz A Si Rjpfx Ah Eedt Compact system G2000 with Mini Rex 4000 forming machine Compact proofing cabinet with an hourly output of approximately 2,500 pieces For higher output without proofing cabinet operation, Mini Rex, swiveling, up to a maximum of 4,000 pieces/hour Weight range: 35-85 g Die size: SK63 and RK58 Dies for round and square rolls Lateral discharge conveyor Proofing time approx. 6 minutes at an output of 2,000 pieces/hour Dough divider included, with one dough dividing tool of your choice, subject to availability Integrated impact roller for shaping

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2MAZL000283, power of the servo motor: 350 W, input voltage: 230 V, clearance between the columns: 70 mm, type of input current: AC, throat depth: 120 mm, feed length X-axis: 22 mm, feed length Y-axis: 78 mm, feed length Z-axis: 10 mm, pneumatic connection: 6 bar, JUKI MOL-254 – Automatic Belt Loop Attaching Machine High-Speed Denim Production Unit – Video Verified (03/2026) Description For sale is a JUKI MOL-254 automatic belt loop attaching machine, designed for fully automated production of belt loops in jeans, trousers and workwear. This is a specialized high-speed production unit, not a standard sewing machine. The machine automatically feeds, cuts, positions and bartacks belt loops with consistent precision and strength. The unit has been used in a professional garment production environment and is offered as a complete industrial workstation. Video recorded in operation on 05.03.2026 Serviced on 27.02.2026 Production-ready condition Production performance Cycle time approx. 1.2 seconds per loop Up to 2,000–2,500 belt loops per shift Simultaneous top and bottom bartacking Consistent symmetry and reinforcement quality Key features Fully automatic belt loop feeding, cutting and attaching Integrated bartack stitching system Pneumatic material handling system Digital JUKI control panel Adjustable loop size settings Stable performance on heavy fabrics such as denim and workwear Designed for continuous industrial use Includes JUKI MOL-254 machine unit Kodpey Nd Hgofx Ah Eodt Integrated motor and drive system Pneumatic system Industrial table and stand Operator control panel Thread stand Technical details Manufacturer: JUKI, Japan Model: MOL-254 Type: Automatic belt loop attaching machine Control: Electronic JUKI control system Drive: Industrial motor with pneumatic system Application: Belt loop production Condition Used industrial production condition Fully functional Serviced 27.02.2026 Video proof available Typical signs of use from factory environment Sold as-is, where-is, without warranty Applications Jeans manufacturing Workwear production Trousers production Automated garment production lines Location Valga, Estonia Logistics Buyer responsible for dismantling and transport

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, Lamella Production Machine The automatic acoustic panel stapler is equipped with an advanced three-axis NC control system, providing exceptional precision and flexibility in the manufacturing process. Below are the detailed advantages of each axis: 1. X-Axis: Precise Stapler Positioning Along the Horizontal Axis - The X-axis ensures accurate horizontal positioning of the staplers along the panel. This guarantees that staples are precisely applied at designated points, ensuring consistent stitching quality across the entire length of the panel, regardless of its size. 2. Y-Axis: Vertical Movement - The Y-axis allows vertical movement of the stapler, enabling stapling at various locations on the panel, regardless of its dimensions or shape. This enables the stapler to work with non-standard sized panels while maintaining full accuracy. 3. Z-Axis: Depth and Stapling Force Control - The Z-axis controls the depth and force with which the staples are driven into the panel. This allows the process to be precisely adjusted according to the thickness and hardness of the acoustic panel material. As a result, staples are embedded with optimal strength, ensuring the durability and aesthetics of the finished product while minimizing the risk of material damage. ### Automatic Changeover Automatic changeover is a key feature that significantly enhances production efficiency. With this function: - Changeover of the X, Y, and Z axes is fully automatic. ### Production Process Optimization Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control Over the Manufacturing Process: - Thanks to MES and ERP integration, every stage of production can be fully monitored and managed. 2. Optimization of Media and Material Consumption: 3. Optimization of Production Plans: ### Significant Relief for Operators Ksdsy Sw I Nopfx Ah Eodt Automation of the acoustic panel stapling process directly reduces manual workload: - Elimination of manual control requirements - Increased work efficiency ### Capability to Develop Algorithms for Media Demand Analysis Thanks to advanced integration with manufacturing management systems, the stapler allows for the creation of sophisticated algorithms to analyze production media demand: 1. Media Demand Analysis: 2. Adapting Production to Variable Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also facilitates advanced OEE analysis, a key performance indicator in production operations: 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: - The MES system automatically calculates the OEE value based on collected data, allowing immediate assessment of the stapler’s operational efficiency. This tool enables rapid identification of areas requiring optimization, such as downtime reduction, product quality improvement, or machine performance enhancement. 3. Early Detection of Problematic Areas: 4. Optimization of Production Plans: ### TPM (Total Productive Maintenance) and Automated Condition Monitoring The stapler also supports the implementation of TPM philosophy, focusing on maximizing machine efficiency and reliability...

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Ksdpfx Ahjzu Ryhe Esdt Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, input voltage: 380 V, For sale: pasta divider and long-forming machine in excellent condition. Dividing range: 25-140 grams. Recently serviced and ready for use. Original machine manual and complete documentation are available. Kdodpfx Aez Dx Aysh Ejt

Year of construction: 1995, condition: good (used), The bender can bend aluminum and plastic, Total length: approx. 11500 mm, depth: 1600 mm. Kdedpfsrif U Eex Ah Eet

Condition: used, Weinig Univar 10 automatic moulding machine for profiling and milling windows and doors, individual components and similar items with circumferential profiles, including a mechanism for single-person operation Kdjdpfx Asztv Eaoh Eot Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device - 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,893 mm, total height: 1,585 mm, total width: 1,240 mm, warranty duration: 12 months, type of input current: AC, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, Pratika 56 MPE X2 The Minipack Pratika MPE X2 is a proven, fully automatic machine for manufacturing shrink film packaging. This machine is highly versatile and user-friendly, making it suitable for a wide range of products in both food and non-food sectors. • Fully automatic L-sealer with brushless motors and modern PLC control with a 7” color display • Simple operation • Storage of up to 128 recipes including product images • Quick product changeovers • Up to 3,600 units per hour • Convenient and fast product changeovers Ksdpfox Tp H Tjx Ah Eedt • Max. product dimensions: 600 x 400 x 240 mm • Machine dimensions: 2,480 x 1,240 x 1,675 mm • No compressed air required! • Doors on both sides of the machine • Machine interior equipped with lighting

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 36316, Carousel packaging and filling machine with three filling nozzles, designed for automated filling and sealing of cups. The machine ensures a complete process: - automatic cup feeding - filling using 3 filling nozzles - placing and heat-sealing of the lid film - automatic lid placement - discharge of the finished, sealed product The machine is equipped with a product transfer device with a CLAMP/DN32 connection. Suitable for food production and other operations using cup filling. Kdsdpfozua Nrex Ah Eot

Year of construction: 2010, operating hours: 196 h, condition: excellent (used), functionality: limited functionality, bending cheek thickness: 100 mm, additional equipment features: Separate Bending Arm Available, bending radius (min.): 700 mm, The Machine is VERY Sparingly used, Exactly used for bending 196 Bends. Available in Dismantled Condition in Southern Part Of INDIA, for a Very Attractive Price . Kodpfxszc Uu Hj Ah Eedt

Condition: used, Year of construction: 2023, operating hours: 100 h, machine/vehicle number: R91, Used SRAML RBB-LT300 bag in box filler machine - Year 2023Technical Specifications & Performance DataThe Sraml RBB-LT300 is a compact, single-head Bag-in-Box filling machine engineered for reliable hot-fill applications in beverage production. Designed for industrial packaging environments, this unit supports a wide range of bag sizes and delivers consistent, hygienic fills that meet modern quality expectations. As part of a used bottling line or as a standalone filler, it offers dependable throughput and straightforward integration with downstream packaging machinery.Manufacturer: SramlModel: RBB-LT300Year: 2023Production speed: Up to 260 bags/hour (at 5.0L)Formats: Compatible with 3.0L to 20.0L Bag-in-BoxFilling heads: 1Neck/fitment: VitopPower: 1.5 kWVoltage/Frequency: 400 V / 50 HzDimensions (L x W x H): 930 mm x 1170 mm x 2090 mmWeight: 120 kgAdvanced Automation & Control SystemsThe RBB-LT300 is built for efficient, repeatable operations with simplified operator controls and process reliability. It includes an integrated buffer tank to stabilize product flow and a CIP attachment point to connect with plant cleaning systems, supporting hygienic operation and reduced changeover downtime. Quick mechanical adjustments enable efficient format transitions across supported bag sizes without complex tools.Integrated buffer tank for stable product feedingCIP attachment for streamlined cleaning integrationHot-fill oriented design suitable for juice applicationsOperator-friendly controls for setup and run modesConsistent dosing accuracy with a single filling headProduction Line Integration CapabilitiesThis Bag-in-Box filler can operate as a standalone station or be integrated into a complete second hand or new industrial packaging line. It pairs naturally with case/box handling, carton erecting, packing, and palletizing solutions. The machine’s footprint and utilities make it straightforward to position upstream of sealing and boxing stations in beverage production environments.Standalone or inline operationCompatible with Bag-in-Box downstream equipmentFlexible format range from 3.0L to 20.0LIdeal for integration in used bottling line upgradesMachine Condition & Maintenance HistoryManufactured in 2023 and showing under 100 operating hours, this unit presents as a late-model, low-use filler. It is functional and ready for operation, offering a near-new alternative for producers seeking dependable performance without the lead times of new equipment.Low-use machine with under 100 hoursFunctional and ready for operationRecent manufacturing year supports long service lifeOperational Performance & VersatilityOptimized for hot-fill beverage production, the RBB-LT300 handles Bag-in-Box applications for products such as apple juice and similar liquids... Kodozrgrnspfx Ah Ejdt

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Kedszyz A Rjpfx Ah Esdt Touch panel for easy operation. Sheet straightening module. Receiving table. Ask about the product

Condition: used, Year of construction: 2018, Roll production line Fortuna Magnus S6 Profiline Dough divider and rounder Fortuna Magnus S6, year of manufacture: 2018 6-row head machine Weight range 50 g to 140 g Ksdpsz A R Acsfx Ah Eedt Proofing cabinet with heating and humidifier, year of manufacture: 2012 Operation without proofing cabinet possible Long rolling station Cutting unit Punching unit Seeding station with humidification for one-sided seeding Depositor for baking trays or depositing onto a conveyor belt for further processing More information, pictures and videos will follow...

Condition: good (used), Year of construction: 2006, total length: 16,500 mm, - washing machine (requires renovation) - assembly station - panel press without gas filling, in good condition (size 2100 x 2500 mm) Kjdpfx Ahozk A Hxe Eedt - knockdown table - year: 2006 - line length: 16.5 m - direction: right to left

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Kjdpfezwudcsx Ah Eedt Automatic feed Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Equipment: CE marking, We offer this machine in very good condition: Zhou Tai AMD650Z, a bag-making machine, manufactured in 2021. Kodpfxezy Ig As Ah Eedt Manufacturer: Zhou Tai Model: AMD650Z Year of manufacture: 2021 Condition: very good Type of machine: Bag-making machine If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, Complete machinery set for sale, consisting of: Holzher machinery set, like new (in operation since 06/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12 x 18 m) Evolution 7450 vertical machining center Nextec 7705 nesting machining center Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009) including waste conveyor (new, in operation since 06/2024) Nestro dust extraction system (in operation since 06/2024) consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h) briquetting press shredder piping for all machines, various pipe diameters Mobile dust extraction unit Holzkraft RLA160 2x mobile dust extraction units ASA2553 or similar 2x Renner compressors, each 7.5 kW (1 of which is new and in operation since 06/2024) 1x Ayen multi-spindle drilling machine, custom-built, with a 2.5 m stop rail 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014) Kedpfx Ahozh Hw Ae Ejdt 2x electric high-lift pallet trucks, Toyota/BT (year of manufacture) 3x electric high-lift pallet trucks, Cesab, including initial lift (year of manufacture 2025) Various workbenches, templates, pallet racking, material trolleys, etc. BeA various nailers and staplers Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Benchtop drill press Stürmer Festool table saw Bosch large panel miter saw on stand EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection) If you are seriously interested, pictures and details of the individual items can be provided.

Condition: good (used), functionality: fully functional, For sale is a used, custom-built box-clamping machine for the production and assembly of wooden boxes. The system is equipped with a total of 6 hand-operated clamping devices from the Senco brand. The clamping devices are activated via foot valves, allowing the box parts to be positioned and clamped together during the work process. Particularly suitable for the production of wine boxes, fruit boxes, vegetable boxes, and other wooden packaging. Technical data / equipment: Ksdpfx Ahjzynf Sj Eedt Manufacturer: Custom-built Machine type: Box-clamping machine / Box assembly machine 6 hand-operated clamping devices Clamping device manufacturer: Senco Activation via foot valves Pneumatic operation For clamping box parts together Workpiece support / workbench Adjustable fixture for different box dimensions Robust frame construction Suitable for: Wine boxes Fruit boxes Vegetable boxes Packaging boxes other wooden boxes and wooden packaging The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.