Used Automatic Knife Grinder for sale (24,302)

Condition: excellent (used), Automatic circular knife grinder Utma model AC520 year 2015 Iedpfx Aozd Hkusqujau

Condition: used, Year of construction: 2006, Type: AV250 Serial number: 06089-1 Year of construction: 2006 Hole plate diameter: 250 mm Hopper: 800 litres Power: 3 x 400V, 50Hz, 78kW Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg 3 speeds on feed screw, 2 speeds on working worm Iedpfx Aqoyazi Souoau

Condition: excellent (used), Knife grinder MVM model AF1000 with tilting magnet mm 1000 long Isdpfx Aqszcl Nzeujau

Condition: excellent (used), Knife grinder GRIFO with mechanical clamping mm 1.500 long Iaodjykrzyopfx Aquou

Condition: excellent (used), Knife grinder MVM model AF1500 with tilting magnet mm 1500 long Iaodpfey Tpf Nox Aqueu

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Iasdpfsq Dzi Tsx Aqusu Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), Gockel G130PL x 5100mm Vertical Spindle Knife Grinder Iasdpfxoy N Amfe Aquju Manufacturer Gockel Model G130PL x 5100mm Year 1980 Condition Used Serial Number 5908 Stock Number 2602 Mag Chuck 800mm x 5100mm Segmental wheel 1000mm dia Wheel/Spindle Drive 185KW / 248hp Additional Features Year 1980 Travelling Wheelhead New Stones for Wheel Power rise and fall to wheelhead Auto down feed to wheelhead Marpos Sizing Coolant pump and separator

Condition: new, Year of construction: 2026, New automatic knife grinder with tilting magnet mm 2000 long Iedpfxjy Smx Dj Aqujau

Condition: excellent (used), Knife grinder MVM model PX1000 with tilting magnet mm 1000 long, 5 KW grinding wheel motor Iajdpfxjy N Dt To Aquju

Condition: used, Year of construction: 2016, Manufacturer : Kutter- und Gerätebau Wetter Model : AW D114 Year: 2016 Type : automatic mincer / grinder Power : 9 kW Tank capacity : 110 liters Diameter of perforated disc: 114 mm Rotational speed – processing screw: 160/320 rpm Rotational speed – feed screw: 20–40 rpm Ijdpfxjyvv Dds Aqusau Width : 820 mm Depth: 1260 mm Height: 1290 mm Weight : 570 kg Complete technical file  

Condition: new, Year of construction: 2025, New Knife grinder with tilting magnet mm 1200 long, carriage speed steplessly variable, automatic downfeed of the grinding wheel, adjustable grinding length, PLC, colour touch screen display, coolant system Isdpfx Aqowamkveueau

Condition: excellent (used), Knife grinder REFORM model AR18 con with tilting magnet mm 1800x150, grinding wheel motor 4,5 kW Iasdpfx Aoy Daw Dsqueu

Condition: reconditioned (used), Size: max 460 x 350 mm, min 70 x 50 mm Speed: max 25 c/min Infeed height: 120 mm False opening: max 160 mm Speed: kW 7,5 kW Weight: 2.500 kg (approx.) Length: 220 mm Iajdped Nt E Defx Aquou Width: 160 mm Height: 200 mm

Year of construction: 1998, condition: good (used), Built in: 1998 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar) 30 m³/h Iaodpoga Ditsfx Aqueu Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.)

Year of construction: 2004, condition: good (used), Three knife trimmer automatic with integrated pre stacker Built in 2004 Size: max 384 x 340 mm min 140 x 103 mm Size trimmed: max 304 x 310 mm min 136 x 100 mm Book thickness: max 70 mm min 2 mm Speed: max 1.000-7.000 c/h Power requirement: kW 14 kW Compressed air: 40 Nm³/h bei 6 bar Width: 3.612 mm Depth: 2.950 mm Height: 2.030 mm Weight: 4.000 kg (approx.) Equipment equipment for changing the format: Iaedpfef Iyb Njx Aquou - 1 set of pressing plates & holders - 1 set of size extensions - 1 set of table quick change plates - 3 sets of cutting sticks - 2 set of knives

Condition: good (used), Year of construction: 2000, Maschinen Nr. 534 Built in 2000 Maximum Mechanical Speed: Up to 110 cycles/min Max. Individual Product Output: 13,000 products/hour Trimmed Format (Min. W x H x T): 100 x 120 x 2 mm Trimmed Format (Max. W x H x T): 300 x 388 x 80 mm Untrimmed Format (Max.): 310 x 400 x 80 mm Max. Pile Height (Infeed): 80 mm Max. Pressing Force: 20 KN (infinitely variable) Max. Front Trim Off-cut: 40 mm Max. Head/Foot Trim Off-cut: 50 mm Machine Length (Approx.): 2,410 mm Iodpexyff Nsfx Aqueau Machine Width (Approx.): 2,260 mm Machine Height (Approx.): 1,740 mm Approximate Weight: 5,700 kg Control System: Kolbus Co-Pilot (Common) Air Consumption: 50 Nm^3/h or 30 m^3/h at 6 bar Exhaust Capacity (Trimmings): 4,000 m^3/h, 2,000 Pa Electrical Connection: 230/400 V, 3 phase, 50 Hz

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment Iaodpfxepgwaus Aqueu copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories

Condition: used, Automatic Grinder Ijdoukg Dnspfx Aqueau Manufacturer: Seydelmann Model: AV 250 Completely made of stainless steel Two-speed working worm, three-speed feeding worm Standard cutting set Electric power: 80kW Voltage: 400V 50Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Condition: excellent (used), Automatic circular knife grinder Göckel model RB2 Ijdpfxjx Hp Rrs Aquoau

Condition: excellent (used), Knife grinder MVM model K250 with tilting magnet mm 2100 long, grinding wheel motor 13,5 kW Iodpfx Asyg Ny Eequoau

Condition: used, Year of construction: 1959, machine/vehicle number: 4651, Dreiseitenschneider - Halbautomatisch - Three-Knife-Trimmer - Semi-automatic Wohlenberg A43/30WBaujahr / Year 1959 - Serial-No. 4651 Semi-Automatic Online-Video-Inspection by Skype-Video Ijdpfx Aqsh Ax Tdjusau We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Technical data: Grinding wheel diameter: 250 mm Manual feed Power supply: 380 V Total power: 1.1 kW Iasdpfxoymykbe Aquju Overall dimensions: Length: 1550 mm Width: 2000 mm Height: 2200 mm

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Iaedpfx Ashzcabsquou Delivery time: 5 working days after advanced payment

Condition: used, Automatic Grinder Manufacturer: Seydelmann Model: AV 250 K Completely made of stainless steel Electric power: 81kW Iodjukgzyjpfx Aqusau Voltage: 380V 60Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Iajdju H Af Uepfx Aquou