Used Ath 1200 for sale (8,283)

Condition: used, Year of construction: 2009, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2009 In General: Year of manufacture:2009 Control system:Siemens 840 D External gear diameter:1,200 mm Internal gear diameter:1,200 mm Maximum gear width:260 mm Maximum workpiece diameter:1,500 mm Machine base: Travel:600 mm Lateral adjustment:+/- 60 mm Cutting head: Spindle diameter:125 mm Tool holder:SK 45 Distance between spindle and table:0–820 mm Stroke length:270 mm Max. module:16 mm Max. tool diameter:300 mm Max. spindle speed:25 rpm Bdjdpfx Adjzdxi Nerjd Table: Table diameter:900 mm Table bore:320 mm Bore depth:520 mm Max. speed:12 rpm Max. table load:95 kN Equipment: Chip removal:2 magnetic belt conveyors Coolant supply:Cutting oil system with filter and temperature control Set-up operation:Electronic handwheel

Condition: good (used), machine/vehicle number: 3263, Year of construction: 1990, load capacity: 42,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 7,800 mm, total width: 3,460 mm, operation weight: 52,800 kg, additional equipment features: Dual tread, Warning triangle, Equipment: lighting, Kalmar DC42-1200 from Uniktruck Wheel type – Drive wheel: Bdjdoy Dh N Ispfx Adrsd Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00-25 Wheel size – Steering wheel: 16.00-25

Condition: good (used), machine/vehicle number: 2249, Year of construction: 1989, load capacity: 32,000 kg, lifting height: 6,500 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,500 mm, total length: 6,800 mm, total width: 3,400 mm, operation weight: 42,800 kg, additional equipment features: Weight system, Centralized greasing system, Kalmar DCB32-1200 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00x25 Wheel size – Steering wheel: 16.00x25 Bjdpjyuhlpsfx Adrsdd

Condition: used, sepqrator sepamatic 1200 Bdjdozgu Awopfx Adrsd two sieves, 3mm and 5mm.

Condition: excellent (used), functionality: fully functional, Model: TMBBB662005A Pump Model: TMB10662005A Pump Type: ADIXEN ATH2303M Controller Model: 123744 Controller Type: OBCV4 PROF IP54 Firmware: Vi 3.01.00 / Vv 1.08.02 / Vm 3.11 Bedpjx Ap I Tofx Adrjdd Year of Manufacture: 2018/2019 Operating Hours Pump: approx. 25,000 h

Condition: used, Year of construction: 1999, Transnorm belt conveyor 1200-600-500 RA1987 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1200 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Eurodrive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,6 m/s Weight: 60 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Bsdpok Abqxofx Adrsdd Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1996, Transnorm Belt conveyor 1880-400-300 RA1391 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional conveyor length (FL): 1880 mm nominal / external width (NB): 400 mm belt width (GB): 300 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 1.05m/s, adjustable conveying speed with frequency converter also possible at extra cost Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Bdedpfx Adok Abgcjrsd Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Bdodpfxerixi Nj Adred Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Locker changing room 1800 x 1200 x 500 RA2221 Bedsu Sphtepfx Adredd Manufacturer: unknown width: 1200 mm Height: 1800 mm depth: 500 mm different versions available 3 x 2, 2 x 2, 3 x 4 and 2 x 4 (horizontal x vertical) lockers benches also available Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 1200-700-600 RA2187 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Bsdpsq H T R Ijfx Adredd

Condition: used, Year of construction: 2008, Transnorm roller curve combination right and left 45°-1200-900-800 IR800 1551 mm RA2232 Make: Transnorm Running direction: Curve combination clockwise/anticlockwise Roller width (RB): 800 mm conical, plastic coating Nominal/outer width (NB): 900 mm Inner radius (IR): 800 mm Center section length: 1200 mm Offset: 1551 mm Frame height: 80 mm Overall height including motor: 450 mm Drive/transmission: Chain Electrical data: 300-500 V, 0.37 kW Gear motor: SEW, R17DT71D4/TH Conveying speed: please contact us Scope of delivery: without supports Optionally available: Supports Bsdpforixi Tox Adrodd Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 1990, condition: used, x-travel 850 mm y-travel 1200 mm z-travel 600 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Universal 3D measuring center, double-column, modern software, many accessories Bedpfjt Hwqkox Adrsdd

Condition: used, Year of construction: 1991, x-travel 1200 mm y-travel 600 mm z-travel 600 mm total power requirement 25 kW weight of the machine ca. 11,5 t M A H O (Germany) CNC Controlled Bed Type Universal Machining Centre Model MH 1200 S (120012) Year 1991 * Partially reconditioned in Year 2007 by MMD Company _____ Table travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mm Spindle head Z axis, cross 600 mm Rotary Table size 1,000 x 800 mm Distance between spindle and column, max. 900 mm Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Max. weight of workpiece 1,000 kg Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min Feeds / quick feeds, B Axis 1 – 1,500° / 10 rpm Spindle drive 15 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 11,500 kg Dimensions of machine 2.75 x 5.10 x height 2.90 / 3.40 m Accessories / Special Features: * MAHO Continuous Path Control, Model CNC 432, for 5 axes, with colour monitor, graphics, and all the usual subprograms and cycles. Mobile manual control unit with RS 232 Interface Entry for external data communication. * CNC rotary table (B Axis) in conjunction with the CNC Controlled swivelling milling head allows machining in 5 axes, Resolution 360.000 ° * Vertical, rotating milling head with hydraulic tool clamping. * Horizontal milling spindle with hydraulic tool clamping. * CNC controlled tool changer with 36 positions. Tool life supervision and tool breakage supervision. With RENISHAW Measuring Probe. * Separate coolant device (no internal coolant supply) * Complete covered working area with sliding doors. * Chip conveyor. Oil cooler for the hydraulic system. Condition : Very good. Can be inspected under Power here in our stock. This is a very stable machine suitable for heavy cuts. Bdsdpfx Aot Hwqwedrsd It was partially reconditioned in 2007 by MMD Company: geometrically measured, and mechanic and electrics were tested - a beautiful machine for the “ Conaisseur”. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Bodpet Hwqqefx Adrjdd Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, functionality: fully functional, Year of construction: 2002, load capacity: 2,500 kg, Telescopic fork tines ISO class: ISO class 2 = 1,000 - 2,500 kg Bdodpfx Ajw Dwqbedrod Condition: Ready for use and fully functional Technical condition: good Description: Year 2002 ISO 2A (41 cm) Capacity 2,500 kg Dimensions 150x45 Reachforks 1,200 - 2,050 mm ID OS1537

Condition: good (used), Sepamatic 1200 Bone Separator, This machine removes the meat/flesh from the bone. It is an ideal item of machinery for the meat and fish industries. Bdodpfozf Iv Iex Adrod

Condition: used, Year of construction: 2006, BIGLIA B 1200 M MOTORIZED TURNING LATHE YEAR OF FIRST INSTALLATION: 2006 CNC: FANUC Series 18i – TB MANUAL GUIDE DISTANCE BETWEEN CENTERS: 1,315 mm MAX. ROTATING DIAMETER: 500 mm MAX. MACHINABLE LENGTH: 1,200 mm MAX. MACHINABLE DIAMETER: 410 mm CHUCK DIAMETER: 315 mm BAR FEED CAPACITY: 95 mm SPINDLE BORE: 110 mm SPINDLE SPEED: 40 - 2,800 RPM TOOL TURRET: 12 POSITIONS / 12 MOTORIZED NO. 2 MOTORIZED TOOL HOLDERS SUPPLIED / 1 AXIAL + 1 RADIAL POWER OF MOTORIZED TOOL HOLDERS: 5.5 KW AUTOMATIC STEADY REST: MAX. DIAMETER 170 mm TRAVELS: X: 255 mm Z: 1,315 mm TAILSTOCK BORE DIAMETER: 115 mm TAILSTOCK TRAVEL: 150 mm Bdedpfxjzf H H Se Adrjd TOTAL WEIGHT: 7,000 KG CHIP CONVEYOR COMPLETE WITH ALL DOCUMENTATION. MACHINE IN EXCELLENT WORKING CONDITION. CONNECTED.

Condition: new, -Baking sheet, 800 x 1200 mm, made of reinforced corrugated aluminum. -130 sheets in stock. -10 cavities. -Equipped with reinforcing bars for improved rigidity during use. Bjdpfx Adjzfzizerodd -Professional format, suitable for bakery and pastry ovens. -Corrugated structure designed to support products during baking. -Durable and practical accessory for regular use in the laboratory.

Condition: used, Year of construction: 1995, x-travel 1200 mm y-travel 600 mm z-travel 600 mm table-size 1300 x 600 mm max. workpiece weight 2000 kg spindle taper ISO 50 spindle turning speed - stepless 30 - 3500 U/min feeds -stepless- 1 - 6000 mm/min rapid traverse 10 m/min power capacity - milling spindle 18 kW max. torque on the spindle 500 Nm distance work spindle /surface of the table 267 - 867 mm distance table-vertical head 58 - 658 mm voltage 380 V / 50 Hz control voltage 230 V total power requirement 22 kW weight of the machine ca. 6,5 t dimensions 3,6 x 4,2 x 2,3 mm • CNC control DR. HEIDENHAIN TNC 360, • hydr. tool clamping attachment Bdsdpfx Adsvw Duhorod • electr. handwheel, • vertical head manually tiltable, • coolant device,

Year of construction: 1984, condition: used, machine/vehicle number: 16700, Color: White With magnetic chip-conveyor Automatic lead Force: 10 to Stroke: 1200mm Bdodpjbrclqofx Adrjd Weight: 6 to Area required: appr. 160 x 140 cm

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, heating capacity: 22 kW (29.91 HP), total width: 1,070 mm, total length: 1,555 mm, total height: 1,058 mm, warranty duration: 24 months, Equipment: crane, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized transport quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ 2-year warranty ⏱️ Delivery time: approx. 6-8 weeks after payment receipt 📦 Please also inquire about the current stock availability. ➖➖➖➖➖ ⭐ Proton BSK Paint Stripping Tank – BSK-1200-700×700 PROFESSIONAL SOLUTION FOR CHEMICAL PAINT STRIPPING! The BSK-1200-700×700 paint stripping tank was developed for the simple and safe removal of paint from workpieces, suspension devices, incorrectly coated parts, or parts to be reworked. The heated tank can be operated with various suitable paint stripping chemicals. The selection of materials and design depends on the chemical used and the process conditions. ☘️ Easy to use ☘️ Clean working environment ☘️ Fast solution ✅ Heated paint stripping tank ✅ Suitable for powder and wet coating processes ✅ For suspension devices, workpieces, and incorrectly coated parts ✅ Automatic thermostat for temperature control ✅ Digital timer with signal at the end of the process ✅ Hinged lid to reduce vapor distribution in the work area ✅ Drainage via stainless steel ball valve ✅ CE-compliant design ✅ Various optional extras available ➖➖➖➖➖ Technical Specifications: ✔️ Model: BSK-1200-700×700 ✔️ Usable dimensions: 1200 x 700 x 700 mm ✔️ Internal dimensions: 1270 x 770 x 820 mm ✔️ External dimensions: 1380 x 880 x 1058 mm ✔️ Max. filling capacity: approx. 724 L ✔️ Heating power: 4 x 5.5 kW ✔️ Installed power: approx. 22 kW ✔️ Rated current: approx. 31.8 A ✔️ Recommended fuse: 50 A ✔️ Exhaust fan: 1 x 1.5 kW ✔️ Exhaust connection: Ø250 mm ✔️ Average heating: approx. 15.4 kWh/h in the first 3 hours ✔️ Average consumption: approx. 62.8 kWh / 8 hours ➖➖➖➖➖ Material design and chemical resistance: As standard, the components in contact with the media, such as the tank interior, workpiece basket, and filter unit, are made of V2A / AISI 304 stainless steel. Depending on the chemical used and the process conditions, these components can also be optionally manufactured from V4A / AISI 316 stainless steel. V4A is particularly required for aggressive, chloride-containing, or highly corrosive chemicals. For the correct material selection, please provide the technical data sheet or the chemical composition of the intended paint stripping agent before preparing the quote. ➖➖➖➖➖ ⚙️ Optional available extensions ✅ Stainless steel immersion basket ✅ Drip tray ✅ Crane support and crane Bjdpfxefw Nvxo Adrsdd ✅ Paint stripping/cleaning booth ✅ Pneumatic lid opening ✅ Stainless steel mixer ✅ Exhaust hood with explosion-proof fan ✅ Special sizes and individual designs available upon request ➖➖➖➖➖ Other BSK paint stripping tanks in various sizes are available. The dimensions and technical data of the other models can be found in the attached catalog. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models. Please contact us for leasing, hire purchase, or installment options. Special sizes or individual designs are possible upon request. We will gladly plan a suitable solution for your paint stripping processes. Request a quote now – make your paint stripping cleaner, faster and more professional!

Condition: used, functionality: fully functional, Year of construction: 1990, operating hours: 11,500 h, load capacity: 20,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,800 mm, fork carriage width: 2,900 mm, fork length: 2,400 mm, total length: 6,100 mm, drive type: Diesel, construction width: 3,050 mm, Heavy-duty forklift - Diesel Load center: 1200 Mast type: Duplex Transmission: Clark Bjdpfx Adszc Sbdjrsdd Condition: Ready for operation and fully functional Technical condition: good Front tires type: Pneumatic Front tires size: 14.00-24 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 14.00-24 Rear tires condition: 60 - 80% New forks + lifting chains / new forks + lifting chains

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 160 mm Length of the planing table 1050 mm Feed motor 7 kW Feed speed 6-40 m/min. control MemoryPlus Weinig Powermat 1200 ----- with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely overhauled at our warehouse before delivery ! Detailed description: ----- 1. Weinig planer and moulder Powermat 1200 ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----- First lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 125 - 180 mm In conjunction with PowerLock 93 - 180 mm Tool flight circle rebate cutter 130-160 mm Axially adjustable range 17 mm Folding device MarathonCoating in front of 1st lower tool holder 2nd spindle ----- First right vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range 80 mm Radial adjustment range Min. tool diameter on stop plane 93 mm Max. tool diameter behind stop plane 200 mm 3rd spindle ----- First left vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 80 mm Pressure shoe in front of left tool holder, including 2 side pressure rollers, spring-loaded 4th spindle ----- First upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 5th spindle ----- Bodpfovnwbcex Adredd Second upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 6th spindle ----- Second lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Axially adjustable travel 40 mm Radial adjustable travel Min. tool diameter to table level 93 mm Max. tool diameter 6 mm below table level 225 mm All spindles with high concentricity. Lubrication points for the axial tool holder movement. Feed system ----- Electronic feed, infin...

Condition: excellent (used), Year of construction: 2016, X-axis: 1,000 mm Y-axis: 1,510 mm Z-axis: 700 mm Bsdpfx Adezcpltjrodd Max. workpiece dimensions: 1,770 x 1,270 x 650 mm Max. workpiece weight: 7,500 kg Connected load: 22 kVA Machine weight: 12,500 kg Includes multi-change electrode changer, 142 positions. Includes documentation. Machine is available immediately and can be inspected while powered on!

Condition: reconditioned (used), - NEW Eddy current separator, Wagner type Bsdozfgtfopfx Adrjdd - with vibrating feeder - feeder width 1200 mm - overhauled condition