Used Ast Ausflicken Machine for sale (68,471)

Condition: used, Year of construction: 1983, Max. bend length: 1640 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Isdjzvw Rpjpfx Ah Estl Hub height of the upper gantry and material thickness adjustable via switch Manual backgauge with spring fingers Weight: approx. 1600 kg

Condition: good (used), Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump Itsdpfx Aoc R Iyash Eel -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: used, Year of construction: 2006, - Veneer bundle length (fiber direction): 400 - 4000 mm - Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm - Veneer bundle thickness: approx. 10 - 40 - Throughput speed: approx. 27 m/min. Double gluing machine for veneer Manufacturer: Monguzzi, Carugate Type: Gluemaster Year of manufacture: 2006 For reliable, uniform, and precise application of PVAc or UREA adhesive in a single pass on veneer bundles that are joined parallel on both sides. Fine adjustment of the adhesive quantity and the uniformly applied lateral and vertical pressure on the veneer bundle result in precise, spot-free, and perfectly glued veneers with minimal adhesive consumption. Technical data: Veneer bundle length (fiber direction): 400 - 4000 mm Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm Veneer bundle thickness: approx. 10 - 40 Throughput speed: approx. 27 m/min. Special features: - The Gluemaster can be positioned directly next to a veneer gluing machine. Iodpfx Aezuzp Toh Eetl - Quickly and easily accessible adhesive containers for fast and easy refilling or cleaning. - Tool-free removal of the adhesive containers and easy cleaning (no dead spots). - Continuous pressure rollers and large pressure plates for uniform pressure on the veneer bundle/edges during gluing. - Rigid 4-point upper roller guide with floating upper rollers to press the veneer bundle without damaging it. - Easily adjustable adhesive quantity. Adhesive pot cooling unit For a longer service life of the adhesive pot, especially recommended for the use of UREA adhesive. 1 motorized discharge roller conveyor To feed the glued veneer bundle out of the Gluemaster and transport it to the connected Fanningmaster. Length of the roller conveyor: 3600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Automatic circular saw machine Manufacturer: Kasto Type: KASTOspeed C9 Year of manufacture: 2008 Technical data - For sawing steel and non-ferrous metals - Test machine, used very little. - Cutting direction 90°. - Saw blade diameter 250, 285 and 315 mm. - Cutting range approximately 15-90 mm or 15x15-80x80. - Power of drive motor for saw unit 11 kW (special equipment). This enables cutting speeds of 50-700 m/min, among other things. - 2 separate and independently selectable tanks for minimal lubrication. Itodpfx Aozuymkjh Eol Accessories: - Angle magazine, loading length 6000 mm. - Material trolley with drawbar. - Portal crane, maximum load 1000 kg. - Oil mist extraction system. - Chip conveyor. - Chip tipping container with rollers. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2020, functionality: fully functional, - Milling spindle 2 x 3.5 kW - Upper and lower drilling heads - Dado saw - Barcode reader Used machining center Manufacturer: Masterwood Type: MasterDrill TF 600 SA Year of manufacture: 2020 With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8 ~ 60 mm - Workpiece length: 400 ~ 2500 mm - Workpiece width: 400 ~ 950 mm Drilling heads: - The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance. Upper drilling heads: - Vertical drills in X direction: 7+7 - Vertical drills in Y direction: 5+5 - Horizontal drills in X direction: 2x2 + 2+2 - Horizontal drills in Y direction: 2+2 Lower drilling head: - Vertical drills: 3x3 Dado saw: - A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm. Milling spindle 2 x 3.5 kW: Technical data: - Maximum power: 3.5 kW - Maximum speed: 18,000 rpm - Clockwise/counterclockwise rotation - Operation via inverter - Tool holder ER 25 - Air cooling The positioning accuracy of the units is +/- 1/10 mm Automatic workpiece discharge: Motorized conveyor belt with sensor control. CNC and software: - The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit. The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel. Masterwork: - Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML. Master Drill: Human-machine interface for managing operational activities (maintenance/setup). Trepan: An interface that the operator uses for manual and setup operations. Barcode reader: - Motorized roller conveyor for feeding workpieces into the infeed. - CAM start software package for Masterwood TF 600 SA - Automatic barcode scanner at the infeed Itsdpozux T Nsfx Ah Eol Note: The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the outer surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours: 5275 Commissioning date: March 31, 2009 Itsdpfx Aszwqyyoh Eol Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blast wheel, number and type: 2 WX1M Outer diameter of the blast wheel: 330 mm Blast wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance of the spindle axis from the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: used, Year of construction: 2014, operating hours: 11,517 h, total height: 2,880 mm, total length: 10,000 mm, total width: 2,700 mm, Colour: White Empty weight: 6.000 kg - Year: 2014 - Documentation available: No Ijdpfx Ahjx E Uk Uj Eetl - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Main motor power [kW]: 10 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Motor power [kW]: 3.6 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Safety mat, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - └ Oil free: Yes - CNC documentation available: USB stick - Table length [mm]: 5150 - Table width [mm]: 1600 - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Transport dimensions: 10000mm x 2700mm x 2880mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, functionality: fully functional, Plastic processing line/installation or stand-alone machines for various applications. 1) Single-shaft shredder/mono-rotor shredder (various sizes), 18.5 kW or 30 kW 2) Conveyor belt with head pulley magnet or discharge screw, discharge height 2 meters 3) Grinding mill/crusher, 1000 series, 45 kW 4) Discharge system with silo/cyclone, blower, and big bag system/frame, and double outlet (stainless steel), outlet height 2.3 meters. In stock, viewing and testing possible by appointment. Itodpfxezv S Hre Ah Eel Machines and equipment can also be purchased separately. Call us or send an email. For information: Please include your first name, last name, company name, and valid phone number in all requests.

Condition: refurbished (used), Year of construction: 2025, Equipment: documentation/manual, CMS NC SA32 TM R65 CNC machining center for woodworking and plastic machining. The machine was originally manufactured in the 1994 and underwent a complete control and drive retrofit in 2025. As part of the retrofit, the machine was equipped with: New OSAI OPENcontrol CNC system New servo drives and servo motors New control electronics and operator interface Modernized machine control architecture and programming environment This upgrade combines the reliability of a modern CNC system with the robust industrial construction of a heavy-duty CMS machining center. Technical Specifications X-axis travel: 3,250 mm Y-axis travel: 1,250 mm Z-axis travel: 250 mm Vacuum worktable size: 3,240 × 1,200 mm R65 revolver unit with 6-position rotating drum Itjdpfxezv Si Ts Ah Eel 25 high-speed electrospindles (18,000 rpm) and 5 electrospindles (9,000 rpm) Tool holders: ETS32 collets, MK2 Morse taper, hollow cutters Ø30 mm Feed speed up to 20,000 mm/min in X and Y axes Dual Becker VTLF250 vacuum pumps for workpiece clamping Machine weight: approx. 8,500 kg Equipment OSAI OPENcontrol CNC control system Vacuum workpiece clamping system Automatic centralized lubrication Hydraulic revolver positioning system Dust and chip extraction hood Complete technical documentation for both the machine and the new control system Condition The machine is fully operational and ready for production. The 2025 retrofit significantly improved reliability, serviceability, and future spare-parts availability while retaining the proven CMS mechanical structure. Inspection and testing under power are available by appointment. An additional identical CMS NC SA32 TM R65 machine is available and can be purchased separately either: as a spare parts machine, or as a complete operational machine with the original control system and software.

Condition: ready for operation (used), Year of construction: 2013, Fritsch Easyline make up pastry line Iodpfx Aszv R Emeh Estl year of build 2013 table length overall 573cm. conveyor belt width 65cm guillotine filling depositor cutting knives etc. pictures BEFORE cleaning

Condition: used, Sandblasting Machine, Surface Cleaning Equipment, Sandblasting Cabinet, Used Machine Compressor: Manufacturer: Atlas Copco Type: XAS 90 Year of manufacture: 1992 Max pressure: 8,5 bar Deutz engine Ijdpoy H I U Njfx Ah Eetl Overall dimensions: Width: 1500 mm Depth: 3500 mm Height: 1300 mm Tank dimensions: Ø 630 × 1200 mm – 2 pcs Dust chamber dimensions: Width: 930 mm Depth: 630 mm Height: 1390 mm Sold in the condition shown in the pictures, with accessories.

Condition: refurbished (used), Shot blasting machine, Turntable Shot Blas Machine, abrasive blasting machine, surface treatment machine, Wheelabrator-Berger, Used Machine Itsdpfozbqp Dox Ah Eel Manufacturer: Wheelabrator-Berger Maschinenfabriken GmbH & Co. KG Machine No.: 8502 Order No. (Kom. Nr.): 80305 Overall Dimensions Width: 2000 mm Depth: 2150 mm Height: 3900 mm Dust Collector Dimensions Width: 1400 mm Depth: 1270 mm Height: 3500 mm Dust Collector Manufacturer: Abrasiv Technical Specifications Automatic cleaning process with air blow-off Total electrical power: 15 kW Refurbished shaft and belt pulley Two electric motors have been rewound

Condition: good (used), Year of construction: 2002, Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Itsdpfxjvy Anxe Ah Esl Type: Vertical Drive: Hydraulic Machine for Rubber.

Condition: used, Year of construction: 2020, operating hours: 87 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input current: 2 A, Equipment: type plate available, Used FINIMAC blasting cabinet/shot blasting machine for sale, model V1, manufactured in 2020 (serial number 2733), by FINIMAC (Vittuone, Milan, Italy). Second-hand equipment, with very little use – the internal counter registers approximately 87 operating hours. Cabinet with inspection window, two work gloves for handling parts, control pedal, pressure gauge, and its own control panel (main switch, emergency stop button, and hour counter). 400V three-phase power supply. Internal identification "M63". Isdszvdfmjpfx Ah Eetl Condition: used equipment (not new/factory), functions normally, tested and operational.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 18M0227, Shot blasting / sandblasting machine. Used for a short period, custom-made by NORDBLAST. The machine’s original purpose was to compact the aluminum from which bicycle rims are made and to create a rough surface texture, resulting in a homogeneous rim surface. Thanks to its nozzle-based application system, the machine is versatile and suitable for various applications. SIEMENS control system, filtration unit, etc. Itsdszu Slrspfx Ah Esl

Condition: excellent (used), functionality: fully functional, conveyor belt width: 250 mm, input voltage: 400 V, total length: 570 mm, working width: 250 mm, total width: 560 mm, total height: 1,230 mm, table length: 800 mm, DGUV certified until: 09/2027, Kalmeijer KGM Pastry Machine with heating system, sheet metal transport with "stop and go" function, and 1 patterned roller for "Speculoos" cookies. Machine is mobile. Connection: 400V, 16A - CEE plug. Dimensions: 560 x 570 x 1230 mm (W x D x H). Used machine, cleaned. Quality from a specialist company! Iedpfoxyqu Njx Ah Eotl Benefit from over 35 years of experience! Additional patterned rollers Baking sheets Maintenance contract Delivery service Training & commissioning We have other pastry machines in stock!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Drive system with a compact drive unit and a 2-connecting rod power transmission. • Total pressing force 200 t • Stroke rate 30...120 min-¹ • Working capacity 29 kNm • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm Isdpszu Avbjfx Ah Eotl • Press force monitoring • Hydraulic overload protection • Main control panel + Two-hand control panel • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance

Year of construction: 2025, operating hours: 30 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BDL205MYH30006, Equipment: CE marking, 2025 BIDELI 30kg Fully Automatic Coffee Roaster | Only 30 Hours | Available Immediately Available Immediately – No Production or Shipping Lead Time. A unique opportunity to purchase a 2025 BIDELI 30kg Fully Automatic Coffee Roaster in near new condition. The machine has only been in operation for approximately 30 hours and is in excellent mechanical and aesthetic condition. The roaster is being offered for sale due to the closure of our coffee roasting business due to unexpected health reasons. Optionally, the complete production line and processing equipment are also available. Manufacturer Manufactured by BIDELI, a professional coffee roasting equipment manufacturer with over 30 years of experience. Main features Batch capacity: 15–36 kg Year of manufacture: 2025 Only about 30 operating hours Fully automatic operation Siemens PLC control system Weishaupt (Germany) modulating gas burner Forced hot air roasting system Heavy-duty cast iron roasting drum Fireproof brick insulation around the drum Fully automatic vacuum green bean feeder Automatic batch operation Highly efficient cooling system (2–2.5 minutes) Decalcifying, chaff collection system Highly efficient afterburner with about 95% smoke and VOC reduction Compatible with Artisan roasting software Recipe memory for up to 10,000 roasting profiles Simultaneous roasting and cooling Natural gas operation Approx. 4.5 m³/h afterburner without Approx. 7.5 m³/h with afterburner Continuous production capacity: 120–140 kg/h Total weight: 2800 kg English control interface and full technical documentation Fully automatic production The integrated automatic vacuum green bean loader places the next pre-loaded green coffee batch into the roasting drum immediately after the previous batch has been emptied into the cooling tray. In fully automatic mode, the machine performs consecutive roasting cycles with minimal operator intervention, ensuring maximum productivity and perfectly repeatable roasting profiles. Condition Nearly new condition Only approximately 30 operating hours Excellent mechanical condition Excellent aesthetic condition Demonstration roasting is possible by prior arrangement. Warranty Approximately 6 months of manufacturer's warranty remaining One year of free replacement parts from the manufacturer. Included The roaster is offered with all original accessories required for professional coffee roasting. The complete production line is also available, including professional packaging and processing equipment (optional). Important information The machine is currently installed and can be demonstrated with coffee by prior arrangement. As we are closed for health reasons, I am unfortunately unable to assist with disassembly or arranging transport. Iedpfx Ahozht I Uo Eetl However, I can arrange forklift loading onto the buyer's truck. The machine is sold with a commercial invoice. Only for serious interest. Note: I only speak Hungarian, but I can easily communicate in English and German via email or message using computer translation.

Year of construction: 2013, condition: ready for operation (used), An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible. Ijdpfx Asxd Avteh Eotl

Condition: ready for operation (used), Year of construction: 2015, A Brazilian machine, with good representation in London, for the production of filled pasta is available. Two intermeshing augers for the dough, one auger for the filling. Capacity: 20kg-100kg/h. Formats: savory or drop, kibbeh, pillow, ball and croquettes. Compared to Italian ravioli machines, this machine can work with considerably moister doughs and fillings. The machine works accurately to the gram while adhering to the original recipes. Dimensions X/Y/Z: 650mm/1150mm/1400mm, weight: approx. 200kg. Documentation available. Itsdpfjtryk Eox Ah Esl

Year of construction: 2000, condition: ready for operation (used), Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available. Itsdetk Rwtopfx Ah Eol

Year of construction: 2013, condition: ready for operation (used), Effective diameter: 1000mm, effective height: 450mm, max. load: 900kg, connected load: 7.34kW, turbine power: 5.5kW, impeller diameter: 334mm, throwing blades: 6, discharge speed: 30m/s-70m/s. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/3500mm, weight: approx. 2050kg, operating hours: 2559h. Documentation available. On-site inspection is possible. Iedpfxovdu N Ns Ah Eetl

Year of construction: 2011, condition: ready for operation (used), A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible. Isdpfx Ajyn N Apsh Eetl

Year of construction: 2005, condition: ready for operation (used), Two glass sandblasting systems from S.A.G. are available. 1) S.A.G. T4, year of construction: 2005, arrangement: vertical, max. blasting width: 3000mm, max. blasting height: 2250mm, max. glass height: 2400mm, glass thickness range: 3mm-40mm, blasting capacity: approx. 15m²/h, machine dimensions X/Y/Z: approx. 3800mm/3300mm/1900mm, weight: approx. 1550kg. 2) S.A.G. T3, year of construction: 2002, blasting width: 2800mm, blasting height: 1200mm, glass thickness range: 3mm-40mm, machine dimensions X/Y/Z: approx. 4100mm/2300mm/1900mm, weight: approx. 1350kg. Documentation available. An on-site inspection is possible. Isdpsyrtamofx Ah Eetl

Condition: ready for operation (used), Year of construction: 2021, An industrial pasta system Juwel for large-scale production of noodles and similar products is available. Components: drying cell TS-120, noodle machine Pressquick PQ6-SU and noodle machine Pressquick PQ3-SU. Drying baskets: 100, kettle capacity: 12kg, daily capacity: approx. 500kg, hourly capacity: approx. 50kg, total system dimensions X/Y/Z: approx. 2000mm/900mm/2100mm. Documentation available. An on-site inspection is possible. Isdpfx Aewd Tafeh Estl