Used Ast Ausflicken Machine for sale (67,512)

Condition: excellent (used), KD-PUTZ with dimple Completely made of stainless steel Sheet metal fettling machine for perforated plates normal plates with 2 edge for 60x80 sheets on the short side edge Hodpfx Abegh A Sve Iok Top condition Connection 16 Ah

Condition: new, Year of construction: 2024, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,3 t lock stroke 280 mm capacity of ejector 61 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 78 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 147, 191, 241 cm 2 volume cast pressure 396, 327, 275 da/cm² casting area 226, 274, 326 cm 2 Traverse Stroke 220 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke Hedpfxsr Hwf Aj Ab Ijk 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.3Integrated water circuit 2+6 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.1Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.3Spray rail CR 275

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Hodpfxofrvzvo Ab Isk Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Year of construction: 2023, condition: new, Machine height : ~4300mm Machine width : ~3400mm Machine length : ~3400mm Maximum work piece height : 1400mm Maximum hook capacity : 2 x 500 kg Number of blast wheels : 2 x 7.5kW E-Eco Frequency inverter for turbine : 2 pcs Blasting time : Adjustable Hodpfx Aboi D Digs Iok PLC : Siemens S7 1200 + TP 4'' Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : PC4 (4.000m3/h) Total installed power : ~21kW This type of machine has all the electric cables on quick connectors, you only need three days and 2 mechanics.to prepare it for work. The machine is on stock. A test of the machine in our premises is possible with prior notice

Condition: like new (used), Year of construction: 2004, functionality: fully functional, GANTRY ROTOTRANSLATING TABLE MILLING MACHINE EQUIPPED WITH SELCA 4060 PD NUMERICAL CONTROL X- AXIS CHAIR 1,600 mm. Y AXIS COURSE 2,000 + 500 mm. for tool change Z AXIS THROUGH 900 mm. ROTARY TABLE DIMENSION (C AXIS) 1,200 X 1,200 mm. MAXIMUM LOADABLE WEIGHT : Kg. 2.000 T-slots No. 9 slots width 18 mm. Distance between columns 1,550 mm. Electrospindle power S1 28 Kw at 3,000 rpm. 24-position tool changer SELCA numerical control type 4060 PD electric cabinet cooling unit (airc) "Spray mist" type tool cooling system (SPR) Hjdpfxot I Tuzo Ab Iek Laser system for tool integrity check measurement

Condition: used, Year of construction: 1994, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm Hjdpotuxmyefx Ab Isk casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 62,603 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, Laser cutting system with LiftMaster TECHNICAL DETAILS Software: TRUMPF CNC based on SINUMERIK 840D sl Laser: TruFlow 4000 Laser type: CO2 laser Laser power: 4,000 W Travel X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Max. workpiece weight: 1,700 kg Accuracy Maximum positioning scatter Ps max: ±0.03 mm Position deviation Pa: ±0.05 mm Smallest programmable increment: 0.001 mm Max. sheet thickness Steel: 20 mm Stainless steel: 15 mm Aluminium: 10 mm Laser gas consumption HE (4.6): 13 l/h CO2 (4.5): 1 l/h N2 (5): 6 l/h Hedpfxexamdys Ab Ijk MACHINE DETAILS Beam operating hours: 31,822 h Laser operating hours: 62,603 h Machine connected load: 62 kVA Chiller connected load: 26 kVA Space required (LxWxH): 12 x 5.3 x 2.2 m Weight: 14,500 kg EQUIPMENT - Closed machine frame - Pallet changer - LiftMaster - Longitudinal conveyor belt - Light barriers - Control panel with touchscreen

Condition: excellent (used), Bohm & Co. spiral binding machine (similar to RENZ) Hedpfx Abswgy I Is Isk For plastic and metal spirals in various diameters (Various tabs available for different diameters) Other bookbinding machines available: Hang eyeleting machine, Tränklein corner rounding machine, Kroll punching machine, etc. Price plus VAT EXW. All information is subject to change without notice. Subject to prior sale. Dealership. This sale is made without any warranty.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 30l / 150 kg Cleaning degree: SA-3.0 (deep and extensive corrosion) Air demand: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Working temperature: -20 - 100 °C Cleaning performance: up to 16 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 45 kg The SBM series compressed air blasting systems are mobile machines designed for advanced surface treatment using a compressed air jet and abrasive grains. The beneficial conical bottom design facilitates abrasive movement and the possibility to use different valve designs makes the abrasives suitable for processing all types of abrasives with spherical, round and/or sharp-edged shapes and any grain size. The blasting systems of the SBM series can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, which ensure quick and safe connection while maintaining high compressed air throughput. The abrasive loading is carried out by a pneumatically operated rubber membrane - without the need for inefficient screw connections - making the SBM series blasting systems safer and easier to operate. The blasting unit is also equipped with a large inspection valve, enabling quick emptying of the tank and the possibility of internal inspection. The blasting machines of the SBM series allow simultaneous operation with one or two working nozzles (depending on the model). Hsdpfxewry R Ts Ab Iok The control of the blasting device (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning directly can interrupt the operation of the machine, as required by the latest health and safety regulations (solution available as an additional option). The SBM blasting unit container was designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE-marked.

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. Hedpfx Abewm Nq Ej Iek • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Hodpewywn Esfx Ab Iek

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 90l / 450 kg Hedpfx Abswrzbge Isk Degree of cleaning: SA-3.0 (deep and widespread corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 22 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 110 kg The compressed air blasting machines of the SBM series are mobile machines designed for advanced surface treatment with compressed air jets and abrasive media grains. The advantageous conical bottom design facilitates abrasive movement and, combined with the option to use various valve types, makes the abrasives suitable for processing all types of abrasives with spherical, round, and/or angular shapes and any grain size. The blasting units of the SBM series can achieve a surface quality up to class SA-3/SP5 and a capacity of up to 106 m2/h. SBM series sandblasters are equipped with large claw couplings, ensuring quick and safe connections while maintaining high compressed air throughput. The abrasive is loaded via a pneumatically operated rubber membrane - eliminating the need for inefficient screw connections - which makes the SBM series blasting units safer and easier to operate. The blasting device is also equipped with a large inspection valve that allows for quick tank emptying and the possibility of internal inspection. The SBM series blasting machines allow simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting device (in pneumatic or electric versions) is intuitive and precise, making it efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an additional option). The tank of the SBM blasting unit has been designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU, based on and under the supervision of a design approved by a notified body, and is CE-marked.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( Seri Bıçak Değiştirme Sistemli), - Robust mechanical structure capable of processing aluminum profiles with high quality - Medium recording practice of aluminum profiles in -45 / +45 degree angle ranges - Easy blade group change system - Easy angle adjustment with mechanical stops - Adjustable resting system according to four different profiles Hsdpfxsviq Ryj Ab Isk - Cutting speed adjustment with hydropneumatic system - Knife storage rack (4 pcs.) - Cutter fluid spray system - Max. process diameter : 160 mm - Max. Blade : 200 mm - Min : 90 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 ALUMİNYUM PVC ÇOKLU ORTA KAYIT ALIŞTIRMA MAKİNESİ, - Notching (milling) process with adjustable linear motor movement - 5 adjustable resting systems for different profiles - Quick blade change feature that makes work easier - Notching of center register profiles between 1/6 pieces Hjdpjq U S Dijfx Ab Isk - Profiles are fixed in the machine with pneumatic vertical and horizontal clamps - Independent operation of vertical and horizontal clamps - Spare knife storage cabinet on the front of the machine - Notching (milling) of 2.5 meter long profiles by means of support arm - Maximum profile notch height ( h ) 140 mm OPTION - Spray cooling system - 220 volt operation

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, functionality: fully functional, • Complies with CE standards. • Performs precise cutting at 0 - 180 degrees and intermediate angles. • Quick setting stops for 15, 22.5, 30, 45, 60, and 90 degree angles. • Table locking lever for intermediate angles. • Saw output speed regulator reduces speed when cutting aluminium, decreasing motor load. • Safety guard for secure cutting. • Diamond saw blade diameter: 450 mm, output distance: 12.5 cm. Hedpfx Aoq U Tctob Iok • Standard with measurement and transport conveyor (2.5 metres right and left). OPTIONAL • Cooling system and Hydro check system available for aluminium cutting. • Capability to work with a digital meter.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( 2 Bıçak), - Conforms to CE standards. - Possibility of lapping the middle register connections of PVC and aluminum profiles. - Up to 30 degrees at different angles, possibility of lapping the middle register connections of profiles - Pneumatic profile clamping system B7ull38nwa - Ability to move the milling motor with a pneumatic cylinder. - Easy series change thanks to the separator button (60-70) Hedpfxeq U S Ahs Ab Iok OPTION - Hydro check system - Cooling System

Condition: good (used), 1 x TBM Tecnopast 350kg lifting twin-arm pastry mixer & 3 bowls. Fitted with Jacking castors This machine has had a complete control panel internal rebuild with modern components in 2015. Technical specification: Manufacturer - TBM Tecnopast Bakery Machines S.P.A. Hjdpfxjw Adukj Ab Isk Model - T500 ETT. Capacity - 350 kg (dough) & 225 kg (flour).  Installed power - 11.6 kW.

Year of construction: 2026, condition: new, Bath pasteurizer option is the perfect solution for post fill pasteurization of your bottled or canned products. 97 units of standard 0.75 L bottles easily fits in 4 baskets.  Our bath pasteurizers can be produced in two options: 1. Autonomous bath pasteurizer with electric heating elements and integrated control panel. 2. Bath pasteurizer as an option together with HEAT or ECOHEAT pasteurizers. Then water heating is done with our pasteurizer and the same control panel is used for controlling both devices. Features: Hodpfx Asrif Smjb Ijk Mounted on pivoting wheels. Insulated heating bath to save the energy and temperature. Can be used for glass bottles, jars, cans, any other heat resistant package. Works with different products, like juices, jams, marmalades, puree, sauces, etc. Automatic temperature and time control. Water overflow protection. Fast and easy loading and unloading of bottle trays. Entirely made of stainless steel. The bottles, cans, or jars are loaded into the trays and then trays are loaded into the bath. The desired pasteurization temperature and holding time settings can be set simply using the integrated control panel or on the HEAT or ECOHEAT pasteurizers. At a start of process, bottles or jars are placed into the bath, then water is filled into the bath until it reaches bottle neck. Then pasteurizer is connected, temperature (max 90 C⁰) and time is set. Then it starts to heat up the water inside the bath. When set temperature is reached, timer turns on and pasteurization is started. In the meantime, in the new set of trays filled bottles can be loaded for a faster exchange process. When timer ends, water out of the bath pasteurizer is released and bottles are unloaded. As the temperature is only measured in the bath, it is important to monitor the core temperature of your product to ensure that adequate pasteurization has been achieved.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 17137, CNC machine with 0 operating hours. The machine is now only EUR 18,500. Hjdpfx Aow H N Nzsb Iok

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,060 mm, Multiple operations in one pass: deburring, rounding, oxide removal, metal slag removal ... Hedpfsr Iydgox Ab Iek Abrasive belt aggregate (K) TopBrush aggregate (4PTB) Working width: 1060 mm Fast throughput: rounding at 4 m/min Operator-friendly operation via touch screen. Ex showroom machine!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm Hsdpfx Aeywg Rdsb Iek MACHINE DETAILS Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Hjdpfx Aex Tf Itsb Isk

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine. Hjdpfx Abekyrphj Isk -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards Key Specifications: -Material Thickness: 1 mm – 30 mm. -Maximum Material Width: 1,600 mm -Minimum Material Length: 145 mm -Quick Change System for Straightening Rollers: Standard -Flattening Gap Adjustment: Servo Hydraulic with PLC Control. -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm. -Total Weight: 40.000 kg

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series. -Model: L-9060. -Material Thickness: 1.0 mm – 30.0 mm. -Maximum Material Width: 600 mm. -Minimum Material Length: 145 mm. -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Hjdpjhwb U Tofx Ab Iok Machine Weight: 26.000 kg. Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm. Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm.

Condition: new, Year of construction: 2025, *TFON Leveltech® Leveling Machine Series. -Models: M-5560, M-5511, M-5513, M-5516. -Engineered for precise leveling of materials with a thickness range from 1.0 mm to 15.0 mm, these models offer flexibility in material width and advanced control features for optimal performance -Material Thickness: 1.0 mm – 15.0 mm -Maximum Material Width: Hedpfx Aehwb Uwjb Iok M-5560: 600 mm. M-5511: 1.100 mm. M-5513: 1,300 mm. M-5516: 1,500 mm. Minimum Material Length: 110 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Machine Weight: M-5560: 12.000 kg M-5511: 15.000 kg M-5513: 18,000 kg M-5516: 19.000 kg Machine Dimensions (L × W × H): M-5560: 2,800 × 2,905 × 1,950 mm M-5511: 3,300 × 2,905 × 1,950 mm M-5513: 3,500 × 2,905 × 1,950 mm M-5516: 3,700 × 2,905 × 1,950 mm