Used Arg 220 Plus for sale (30,461)

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Iajdpslf Ek Dofx Ah Nsl

Condition: good (used), Krauss-Maffei Injection unit 220 (complete) with electrical screw drive. Screw diameter 40 mm Iaedpofwcrnsfx Ah Njl

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 1,030 mm, Unwind coils capacity 3000KG length 1030 mm. maximum thickness alu 1.2 mm. maximum thickness galvanized 0.8 mm. stainless steel 0.6 mm. Iaodpsv Stfrofx Ah Nol straightening haul 5 shafts punching 5 units longitudinal edging cutting rolling touch-screen control automatic adjustment of bending roller hourly production 150 tubes diameter 100.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, TECHNICAL DETAILS Swing over bed: 700 mm Max. turning diameter: 520 mm Spindle pitch: 1,500 mm Travel X1: 280 mm Isdpov Hqntsfx Ah Njal Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Clearance through the drawbar: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Drawbar clearance: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MT 5 Feed rates Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the X-axis ball screw (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Bearings replaced on both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in-hole + 2 on the surface - Clamping jaws: 2 hard base jaws - Complete machine documentation - Replacement turret (after complete overhaul)

Condition: used, Year of construction: 1999, plate thickness 3-4 mm pressure 0 t Cutting length 220 mm table height 900 mm quantity of oil 35 l Table dimensions 950 x 790 mm total power requirement 4 kW Isdpfx Asvxwm Hjh Nsal weight of the machine ca. 0,95 t dimensions of the machine ca. 1,0 x 0,86 x 1,2 m Foot switch angle adjustment 30°-140° automatic cutting gap adjustment

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm MACHINE DETAILS Iasdpfxsx I Ehps Ah Nel Cutting medium: HiFocus 161i Control system: MicroStep Total power requirement: 6 kA Machine weight: approx. 3,500 kg EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i

Condition: new, The Basic Plus is a versatile Conventional Horizontal Lathe within the Metal Lathes product group, designed for single part production. Its robust construction ensures precision, making it an ideal choice for repair shops, training institutions, and various workshops. The Basic Plus features hardened and ground headstock gears, a Camlock D1-4" mount with a bore diameter of 38 mm, and adjustable tapered roller bearings for improved functionality. With a compact design and a small footprint, this lathe offers an array of standard equipment including a quick change tool holder and a 3-axis position indicator. Taper turning is facilitated with a movable tailstock, and the robust cast-iron bed provides stability during operation. Explore the extensive selection of optional accessories to fully customize your lathe experience. Order online to elevate your workshop capabilities with KNUTH's high-quality machinery. Ijdpfx Aheu Rc Htj Nsal

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Ijdemck Ryopfx Ah Noal Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Year of construction: 2016, condition: ready for operation (used), This HAITIAN JU9000II/6800 PLUS was manufactured in 2016. It features a clamping force of 9000 kN and an injection unit with a capacity of 2362 cm³. Operating on a 400 V / 50 Hz power supply, it consumes 199 kW and handles a rated current of 354 A. Weighing 39,000 kg, consider the opportunity to buy this HAITIAN JU9000II/6800 PLUS hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping force: 9000 kN • Injection unit – screw: 2362 cm³ / 80° • Power supply: 400 V / 50 Hz • Power consumption: 199 kW • Rated current: 354 A • Short-circuit withstand current (In): 25 kA Iasdpfx Ajyab Afjh Nol • Machine weight: 39000 kg

Condition: used, fuel type: diesel, Year of construction: 2016, operating hours: 955 h, Round tipper Dumper Bergmann 2060Rplus Year of manufacture: 2016 Operating hours: only approx. 950 Payload: 6,000 kg Unladen weight: 4,045 kg Body capacity (struck): 2.5 m³ Body capacity (heaped): 3.6 m³ Body system: hydraulically 180° rotatable and tiltable skip Height: 3,107 mm Width: 2,018 mm Length: 4,489 mm Ground clearance: 2,373 mm Speed: 0-28 km/h Gross weight (road): 7,490 kg, Road payload: 3,190 kg Iedpfx Ahjyaa S Ej Njal This offer is addressed exclusively to commercial buyers as defined by §14 BGB.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] Isdox U U Hbopfx Ah Neal A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] More information available upon request.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 6,000 rpm Iaodpsx I A Hvofx Ah Nol Tool holder SK50 Internal cooling with 36 bar Longitudinal chip conveyor + cross conveyor

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,298 h, load capacity: 2,000 kg, lifting height: 4,500 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished without warranty Technical condition: Good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Iaodex U Hbwepfx Ah Nol Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 750Ah Battery year: 2018 Description: Price includes new UVV inspection and new paintwork. The 2018 battery will be regenerated using a power cycler including a Kappa test (a new or recently refurbished battery is available at extra cost). Charger with matching plug included. We will be happy to arrange cost-effective transport for you. Sideshift, 3rd valve, rear work light, front work light, full free lift, CE certificate,

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors Iajdpfx Aeh Hvk Ash Nol - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Year of construction: 2016, condition: ready for operation (used), This HAITIAN JU9000II/6800 PLUS was manufactured in 2016. It is a hydraulic injection moulding machine featuring a power consumption of 126 kW and a rated current of 207 A. It operates on AC 400 V, 3-phase / N / PE, 50 Hz. Consider the opportunity to buy this HAITIAN JU9000II/6800 PLUS hydraulic injection moulding machine. Contact us for more information. • Voltage: AC 400 V, 3-phase / N / PE, 50 Hz Iodpfxsyabq Ne Ah Neal • Power consumption: 126 kW • Rated current: 207 A • Short-circuit withstand capacity: 25 kA

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 29191, mast type: telescopic, fuel type: diesel, color: yellow, General information Mileage: 56.037 km Weights Empty weight: 3.300 kg Functional Lifting capacity: 230 kg Working height: 2.200 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information TÜV Marked: yes Emission level: Stage V / Tier IV final Delivery terms: EXW Max. horizontal reach: 1650 m Transport dimensions (LxWxH): 7x2,2x3,01 Latest inspection: 2025-10-15 Production country: DE Additional information Please contact Vink Machinery for more information Ruthmann TBR 220 * 2015 * Diesel * 56037 km * 22-meter working height * 16.5-meter horizontal reach * Automatic outrigger * Coming-home * Memory function Iaedpfx Aexqfzxsh Nol * Rotating basket * Inspection valid until October 2026 * 3300 kg net weight * Documents included

Condition: good (used), functionality: fully functional, “3 Pcs. Steinert NES 150 220 E 5009” for Sale Manufacturer: Steinert Type: NES 150 220 E 5009 Belt widthness: 1.500 mm (New belt) With new of good used Control-unit. Isdeu S Sbyjpfx Ah Neal Overhauled, sandblasted and painted.

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Iasdpfex I A Hijx Ah Nel Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 4,000 rpm Tool holder SK50 Internal coolant supply with 22 bar Longitudinal chip conveyor

Condition: used, Year of construction: 1999, Krauss Maffei 80-220 C2 (1999) Clamping force: 80 t Screw diameter: 35 mm Shot weight: 115 g Distance between tie bars V: 405 mm Isdpjwufwqefx Ah Noal Distance between tie bars H: 405 mm Injection pressure: 1837 bar Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 1,000 mm, turning diameter: 90 mm, spindle motor power: 40,000 W, spindle speed (max.): 4,000 rpm, torque: 190 Nm, total height: 2,550 mm, total length: 4,325 mm, total width: 2,350 mm, bar diameter (max.): 90 mm, overall weight: 14,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main and sub spindle C-axis VDI 30 turret (Turret II) Drill breakage control High-pressure system Cooling unit Eco-Fluid coolant lubrication system Iodpex T A Drefx Ah Neal KNOLL chip conveyor Irco Breuning short bar loader

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Machine Benefits Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 Iajdjx D Hwnjpfx Ah Njl • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 29194, mast type: telescopic, fuel type: diesel, color: yellow, General information Mileage: 80.030 km Weights Empty weight: 3.300 kg Functional Lifting capacity: 230 kg Working height: 2.200 cm CE mark: yes Condition Technical condition: very good Iasdpfxjxqf Eds Ah Nel Visual appearance: very good Other information TÜV Marked: yes Emission level: Stage V / Tier IV final Delivery terms: EXW Max. horizontal reach: 1650 m Transport dimensions (LxWxH): 7x2,2x3,01 Latest inspection: 2025-10-15 Production country: DE Additional information Please contact Vink Machinery for more information Ruthmann TBR 220 * 2015 * Diesel * 80,030 km * 22-meter working height * 16.5-meter horizontal reach * Automatic outrigger * Coming-home * Memory function * Rotating basket * Inspection valid until October 2026 * 3300 kg net weight * Documents included

Condition: good (used), Polar Mohr N78 Plus Paper Cutting Guillotine Machine after inspection, ready to work. Like new. Year of production 2014. Technical data: Cutting width 780mm Stack height 120mm 21.5″ LCD display 400V power supply Isdpfxex Ty H Rs Ah Noal Weight 1400kg Enlarged side tables. Chrome table surface Table backlight and optical cutting line Smoothly adjustable pressure force Additional covers for the rear table. Spare knife, sticks, tapping block, operating tools.

Condition: new, Year of construction: 2026, Standard Equipment: - Robust, high-quality, and inclined rotating hood for easy speed reading - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control - Power cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical safety interlock - Emergency stop mushroom button Technical Data: - Weight (kg): 30 - Motor (kW): 0.45 - Single-phase current 230 V - Speed (rpm): 250–3000 - Drilling capacity (mm): 10 • Steel Ø 12 mm • Aluminium Ø 20 mm • Softwood Ø 40 mm • Drilling depth 50 mm • Throat 180 mm • Column diameter 50 mm • Usable working area WxL 300 x 200 mm • T-slots, quantity 2, spacing 100 mm Slot dimensions width 12/20 mm • Spindle B16 • Digital speed display • Drilling depth display: scale • Drilling depth stop: quick-adjust stop ring Ijdpfjby Stpox Ah Njal • Manual feed Optional Accessories: Drilling package 1 consisting of: • Machine vice [felix] 2.0 80 mm • Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm), €270.00 - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? We are an official FLOTT service partner and can supply you with any product from the FLOTT range! Request a quote!

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, number of axes: 4, This 4-axis Matsuura H plus 405 was manufactured in 2004. It features a pallet size of 500 × 500 mm, X/Y/Z-axis travel of 600 mm each, and a B-axis indexed at 1°. The spindle operates at 12,000 rpm with an ISO 40 taper. It includes a high-capacity tool magazine for 240 tools and supports 24 pallets with dual loading/unloading stations. Consider the opportunity to buy this Matsuura H plus 405 horizontal machining centre. Contact us for more information. • Pallet size: 500 × 500 mm • Number of pallets: 24 pallets Iaedpsx Utv Uofx Ah Nsl • Loading/unloading stations: 2 • Tool magazine capacity: 240 tools • Probing system: Yes (touch probe) • Tool presetting: Yes • Tool breakage detection: Laser system • Spindle taper: ISO 40 (DIN 69871) • Spindle speed: 12000 rpm • High-pressure coolant: 50 bar with paper filter • Machine condition: Available for any test / under power