Used Anvil Substructure for sale (258)

Condition: used, functionality: fully functional, conveyor belt length: 1,580 mm, conveyor belt width: 460 mm, conveyor belt speed: 100 mm/s, total length: 1,600 mm, total width: 575 mm, total height: 1,500 mm, motor manufacturer: SEW, Item no.: 1000003859 Used conveyor belt - 1.600 mm Technical data: Overall dimensions: 1,600 x 575 x 1,500 mm (LxWxH) Ltsdotnh Dbspfx Affea Width incl. side: 530 mm Cheek height: 125 mm Width incl. drive: 650 mm Conveyor length: 1,580 mm Conveyor width: 460 mm Belt type: PVC, smooth with cleats / smooth possible Belt width: 450 mm Cleats: H = 20, cleat pitch = 250 mm Substructure: excl. / incl. (H: 900 to 1,500 mm) Drive: Head drive Motor: Gear motor Motor data: SEW, 0.12 kw, 50-60 Hz, 220-240 Volt Conveying speed: constant, 0.1 m/s Special features: Closed side guide (H: 60 mm) Condition: Used / fully functional Function test: Ok

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm Ltjdpfxjxq A Hls Affsa _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: used, mileage: 284,816 km, power: 175 kW (237.93 HP), first registration: 10/2017, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 44 m³, loading space length: 7,250 mm, loading space width: 2,480 mm, loading space height: 2,450 mm, Equipment: ABS, air conditioning, * Sun visor * ABS * ASR * ESP Lsdpfxjndlxqe Affota * Active Brake Assist * Lane departure warning system * Radio * On-board computer * Reversing alarm * Cruise control * Electric windows * Electric mirrors adjustable * Heated mirrors * Central locking * Driver comfort seat * Heated seats * Diff. lock rear axle * Roof spoiler * Air dryer * Trailer coupling * 2-wire air connection * Duomatic air connection * Driver airbag * Roof hatch * 6-speed * Suspension: leaf air * Payload: 5155 * Continuous brake: engine brake ----Special structure: Tail lift: Palfinger MBB C 1500 ML Pro, load capacity: 1,500 kg, shield height: 1,800 mm, aluminum, foot control----Structure: Young flatbed structure/tarpaulin + bows, hardwood floor, lashing eyes, foldable center stanchion. Subframe + flatbed substructure galvanized. Only sold to traders. FOR EXPORT, ONLY THE NET PRICE IS TO BE PAYED !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. EQUIPMENT AND ACCESSORIES. The basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions are our general terms and conditions (see legal notice).

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees Ltsdpfsg N Nl Iex Affoa - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Substructure 900 x 600 x 875 mm

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LZ280/3, turning diameter over cross slide: 190 mm, spindle bore: 43 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 670 mm, quill stroke: 90 mm, quill diameter: 45 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 30 rpm, GDW precision lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful lead and feed spindle lathe with stepless speed control from 30–4000 rpm. The standard paint finish includes RAL 7035 (light gray) for the housing and RAL 7016 (anthracite gray) for the substructure, splash guard hood and chuck guard. Equipment & accessories: ✅ 3-axis position indicator with 6" color display Lodpfx Ajv Dan Djffota ✅ Quick-change tool holder Multifix A including 1 turning tool holder ✅ Coolant system & central lubrication ✅ Chip tray, splash guard & spindle brake ✅ LED machine light & collet board K32 ✅ Electromechanical limit switch device for thread/feed ✅ Tool cabinet with telescopic extension including operating tools Additional equipment package (optional): ➕ Three-jaw chuck Ø 160 mm (up to 4,600 rpm) ➕ Keyless drill chuck (3-16 mm, B16/MK3) ➕ Live center MK3 & drill bit holder ➕ 4 additional turning tool holders & 1 drill bit holder 📦 Delivery: ✔️ Disposable packaging & safe transport including insurance Perfect for precise and demanding turning operations in industry and trade! 🚀

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm Ljdpfxei Igdfo Affjta T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: used, functionality: fully functional, conveyor belt length: 2,470 mm, conveyor belt width: 400 mm, total length: 2,480 mm, total width: 630 mm, total height: 990 mm, power: 0.09 kW (0.12 HP), TAF item number: 1000003856 Manufacturer: trio-technik Year of manufacture: unknown Overall dimensions: 2,480 x 630 x 990 mm (LxWxH) Width incl. side panel: 480 mm Side panel height: 60 mm Width incl. drive: 550 mm Conveyor length: 2,470 mm Conveyor width: 400 mm Belt type: PVC, smooth Belt width: 400 mm Substructure: incl. supports, H: 490 to 990 mm Drive: head drive Motor: gear motor Motor data: 0.09 kW, 50-60 Hz, 380-415 / 440-485 volts Conveyor speed: 0.01-0.02 m/s, constant Special features: Includes ON/OFF switch Includes side guide H: 60 mm Includes CEE plug Ledor D Nxnspfx Affota Condition: Used / fully functional Function test: OK

Condition: new, neu Ledewir A Nspfx Affota ca. 2 - 4 Wochen ab Auftr 3420 € 2000 x 1000 mm 850 mm 8000 kg 712 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: used, mileage: 143,307 km, power: 200 kW (271.92 HP), first registration: 04/2019, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 43 m³, loading space length: 7,250 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, Equipment: ABS, air conditioning, * Sun visor * Driver airbag * ABS * ASR * ESP * Rain sensor * Active Brake Assist * Lane departure warning system * Radio * On-board computer * Reversing alarm * Cruise control * Hill start assist * Electric windows * Electric mirrors adjustable * Heated mirrors * Central locking * Automatic headlights * Roof hatch * Driver comfort seat * Heated seats * Diff. lock rear axle * Roof spoiler * Air dryer * Trailer coupling * 2-wire air connection * Duomatic air connection * 8-speed * Suspension: leaf air * Payload: 7820 Ledpotfpu Eofx Affeta * Continuous brake: engine brake ----Special structure: Tail lift: Bär BC 1500 S4L, load capacity: 1,500 kg, shield height: 1,800 mm, aluminum, foot control.----Structure: Spier flatbed structure/tarpaulin + bows, hardwood floor, lashing eyes, foldable center stanchion. Subframe + flatbed substructure galvanized. Only sold to traders. FOR EXPORT, ONLY THE NET PRICE IS TO BE PAYED !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. EQUIPMENT AND ACCESSORIES. The basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions are our general terms and conditions (see legal notice).

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Ljdpfx Asg N Nl Deffjta Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: used, Straightening and welding plate, steel and grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 2000 mm Width: 1500 mm Thickness: 125 mm Plate thickness: approx. 40 mm throughout Table height: 880 mm - Table substructure made of steel (custom-made) Ltsdsqylk Ujpfx Affoa Weight: 1700 kg Good condition

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Ledeh Ellzopfx Affeta Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: used, functionality: fully functional, conveyor belt length: 1,460 mm, conveyor belt width: 380 mm, total length: 1,520 mm, total width: 580 mm, total height: 1,250 mm, power: 0.09 kW (0.12 HP), input voltage: 400 V, motor manufacturer: Bologner, TAF item number: 1000003860 Manufacturer: unknown Year of manufacture: unknown Overall dimensions: 1,520 x 580 x max. 1,250 mm (LxWxH) Width incl. side panel: 580 mm Side height: 80 mm Width incl. drive: 580 mm Conveyor length: 1,460 mm Lsdpfx Afor Dcxtefota Conveyor width: 380 mm Belt type: PVC, smooth Belt width: 400 mm Substructure: incl., max. 1,250 mm Drive: Head drive Motor: Gear motor Motor data: Bolognese, 0.09 kW, 400 volts Conveyor speed: Constant, 0.063 m/s Special features: Side guide, CEE plug Condition: Used / fully functional Function test: OK

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2860 € 1500 x 1000 mm 850 mm 8000 kg 541 kg Ljdpfjwiripsx Affeta 200 mm 28 mm * - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: used, mileage: 143,307 km, power: 200 kW (271.92 HP), first registration: 04/2019, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 43 m³, loading space length: 7,250 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, Equipment: ABS, air conditioning, * Sun visor * Driver airbag * ABS * ASR * ESP * Rain sensor Ledpfx Afjtc Auasfeta * Active Brake Assist * Lane departure warning system * Radio * On-board computer * Reversing alarm * Cruise control * Hill start assist * Electric windows * Electric mirrors adjustable * Heated mirrors * Central locking * Automatic headlights * Roof hatch * Driver comfort seat * Heated seats * Diff. lock rear axle * Roof spoiler * Air dryer * Trailer coupling * 2-wire air connection * Duomatic air connection * 8-speed * Suspension: leaf air * Payload: 7820 * Continuous brake: engine brake ----Special structure: Tail lift: Bär BC 1500 S4L, load capacity: 1,500 kg, shield height: 1,800 mm, aluminum, foot control.----Structure: Spier flatbed structure/tarpaulin + bows, hardwood floor, lashing eyes, foldable center stanchion. Subframe + flatbed substructure galvanized. Only sold to traders. FOR EXPORT, ONLY THE NET PRICE IS TO BE PAYED !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. EQUIPMENT AND ACCESSORIES. The basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions are our general terms and conditions (see legal notice).

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Ltedpfjv S Hyvox Affsa Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: used, functionality: fully functional, conveyor belt length: 1,980 mm, conveyor belt width: 700 mm, total length: 1,990 mm, total width: 900 mm, total height: 4,500 mm, TAF item number: 1000003872 Manufacturer: MANN + HUMMEL Year of manufacture: unknown Overall dimensions: 1,990 x 900 x 450 mm (LxWxH) Width incl. side panel: 800 mm Side panel height: 100 mm Width incl. drive: 900 mm Conveyor length: 1,980 mm Conveyor width: 700 mm Belt type: PVC, smooth Belt width: 690 mm Substructure: incl. supports with swivel castors, height-adjustable H: 750 to 900 mm Drive: centre station Motor: gear motor Motor data: unknown Conveyor speed: 0.1 m/s Ljdpfor D Rtpsx Affeta Condition: Used / fully functional Function test: OK

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4400 € 2400 x 1200 mm 850 mm 8000 kg 945 kg 200 mm Ltjdpfx Aswiriieffea 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: used, mileage: 253,314 km, power: 220 kW (299.12 HP), first registration: 12/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2025, color: grey, gearing type: automatic, emission class: euro6, loading space volume: 42 m³, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,370 mm, Equipment: ABS, air conditioning, navigation system, * Driver airbag * ABS * ASR * ESP * Rain sensor * Adaptive cruise control * Active Brake Assist * Attention assistant * Lane keeping assistant * Radio * Navigation system * On-board computer * Rear view camera * Cruise control * Hill start assist * Electric windows * Electric mirrors adjustable * Heated mirrors * Central locking * Fog lights * Automatic driving lights * Cornering lights * Roof hatch Ltjdeum H Rmspfx Affoa * Driver comfort seat * Seat heating * Diff. lock rear axle * Roof spoiler * Air dryer * 8-speed * Suspension: air * Payload: 9450 * Permanent brake: engine brake ----Special structure: Tail lift: Palfinger MBB C2000S, load capacity: 2,000 kg, shield height: 1,800 mm, aluminum, radio remote control + foot control.----Structure: Dry freight box, stone floor, 3 lashing rows, light strip, loading area lighting. Subframe and box substructure galvanized.----Construction nR: Low frame/Volumer Sale only to traders. FOR EXPORT ONLY THE NET PRICE HAS TO BE PAYED !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. EQUIPMENT AND ACCESSORIES. The basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions are our general terms and conditions (see legal notice).

Condition: used, functionality: fully functional, conveyor belt length: 3,330 mm, conveyor belt width: 35 mm, total length: 3,480 mm, total width: 950 mm, total height: 750 mm, Item no.: 1000003858 Conveyor belt not driven - 3,480 mm Ledpfxsrz Rlio Affeta Manufacturer: unknown Year of manufacture: unknown Overall dimensions: 3,480 x 95 x 75 mm (LxWxH) Width incl. cheek: 95 mm Cheek height: 50 mm Width incl. drive: - Conveyor length: 3,330 mm Conveyor width: 35 mm Belt type: PVC, smooth Belt width: 30 mm Substructure: without Drive: head drive Motor: without (optionally available - on request) Motor data: - Conveyor speed: - Special features: - Condition: Used / fully functional Function test: OK

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 Ltodpfx Aswiricoffoa The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: good (used), functionality: fully functional, Item no.: 1000003727 Used conveyor belt driven - 820 mm Technical specifications: Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 800 x 750 x 400 mm (LxWxH) Width incl. cheek: 610 mm Cheek height: 100 mm Width incl. drive: 750 mm Conveyor length: 800 mm Conveyor width: 500 mm Belt type: PVC, grip belt Belt width: 500 mm Substructure: without Drive: Head drive Motor: Gear motor Motor data: SEW, 0.37 kw, 50 Hz, 380-500 volts Conveyor speed: max. 0.56 m/s, constant Ltodom Twtmopfx Affja Special features: Condition: Used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, Item no.: 1000003718 Technical data: Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 2,040 x 200 x 130 mm (LxWxH) Width incl. cheek: 135 mm Cheek height: 30 mm Width incl. drive: 200 mm Conveyor length: 2,040 mm Conveyor width: 120 mm Belt type: PVC, smooth Belt width: 120 mm Lodpfx Aehpz T Aeffeta Substructure: without Drive: Head drive Motor: Gear motor Motor data: mini_motor, 50 Hz, 230/400 Volt Conveyor speed: max. 0.03 m/s, constant Special features: incl. Schuko Condition: Used / fully functional Function test: OK

Condition: good (used), Year of construction: 2005, functionality: fully functional, Item no.: 1000003719 Used conveyor belt driven - 2,000 mm Technical Data: Lsdpfxshp Dyxs Affeta Manufacturer: AXMANN Year of construction: 2005 Overall dimensions: approx. 2,000 x 330 x 90 mm (LxWxH) Width incl. cheek: 255 mm Side panel height: 35 mm Width incl. drive: 330 mm Conveyor length: 2,000 mm Conveyor width: 250 mm Belt type: PVC, smooth Belt width: 250 mm Substructure: without Drive: Head drive Motor: Drum motor Motor data: Procon, 50 Hz, star 380-440 Volt, delta 200-240 Volt Conveying speed: max. 0.10 m/s, constant Special features: Condition: Used / fully functional Function test: OK

Condition: good (used), Year of construction: 1998, functionality: fully functional, conveyor belt length: 2,200 mm, conveyor belt width: 120 mm, total length: 2,200 mm, total width: 170 mm, total height: 1,040 mm, power: 0.09 kW (0.12 HP), motor manufacturer: BAUKNECHT, TAF article number: 1000003869 Manufacturer: SPÄHT Year of construction: 1998 Overall dimensions: 2,200 x 170 x 1,040 mm (LxWxH) Width incl. cheek: 125 mm Side panel height: 40 mm Width incl. drive: 170 mm Conveyor length: 2,200 mm Ledor Drxtjpfx Affsta Conveyor width: 120 mm Belt type: PVC, smooth Belt width: 80 mm Substructure: included Drive: Head drive Motor: Gear motor Motor data: BAUKNECHT, 0.09 kw, 50 Hz, 400 Volt Conveying speed: infinitely variable, max. 0.011 m/s Special features: Frequency converter, lateral guidance Condition: Used / fully functional Function test: OK