Used Fine Structure for sale (4,932)

Condition: like new (used), functionality: fully functional, power: 23.17 kW (31.50 HP), overall weight: 1,630 kg, fuel type: diesel, fuel: diesel, wheelbase: 1,680 mm, Year of construction: 2003, operating hours: 3,527 h, machine/vehicle number: 10309448, Cemetery Excavator - Fully Overhauled!!! REFORM BOKI COMPACT EXCAVATOR 2551E - USED EQUIPMENT CHASSIS NO. 1039448, CURRENTLY WITH 3527 OPERATING HOURS Fully Overhauled: - Thoroughly cleaned - Cabin repainted - Support feet repainted - New grapple shells - Service performed: oils, filters, etc. - UVV inspection passed Standard Equipment: - Three-wheel excavator with side steering - Sound dampened - Outside width adjustable from 0.83 to 1.25m - Speed of 0-6km/h adjustable purely mechanically on the drawbar - UVV approved - GS mark "tested safety" Engine: - With water-cooled 4-cylinder diesel engine - 23.2kW / 31.5 HP at 3,000 rpm according to DIN 70020 - Displacement 1,335ccm Electrical System: - Alternator 14V / 35A - Battery 12V / 63 Ah - Work lights Drive System: - Hydrostatic all-wheel drive via wheel hub motors - BOKILOCK DIFFERENTIAL LOCK SYSTEM - Activated from the drawbar and can be switched during operation - Infinitely variable adjustment of the driving speed on the drawbar 0-6 km/h - Mechanical start-up protection on the drawbar - Sensored front axle for automatic activation of the boom safety function Chassis: - Torsionally rigid frame made of fine-grained steel Steering: - The spur gear is actuated via the steering drawbar Brakes: - Service brake via the hydrostatic drive Tires: - 18 x 9.50 - 8 (lawn tread) Hydraulics: Fgsdpfx Ae Ahyf Uofrji - 2-lever joystick control on an adjustable control unit - No visual obstruction due to control elements - Pilot-operated hydraulic valves - All functions are controlled proportionally - Two-circuit hydraulics - Hydraulic tank: 40 ltr., operating pressure: 180bar - Biologically rapidly biodegradable hydraulic fluid - Based on Poly-Alpha-Olefins (PAO) - Currently, the oil change interval is 4,000 operating hours - (Water hazard class 1) Swivel Gear: - Superstructure rotates endlessly on an internally toothed slewing ring - Locking via locking pin in the cabin Excavator Structure: - Reinforced boom and excavator arm made of hot-rolled MSH profiles - Outreach 3,750mm from the outside edge of the base frame - Automatic detection of the operating status activates the "boom push" function when the device is supported (this allows the pressure on the earth grab to be significantly increased under heavy ground conditions) - Lifting force: 830 kp at 3,000mm - Load holding valve, pre-tensioning valve and hose rupture protection - 4 two-piece, hydraulic supports, play-free horizontal locking by means of forged toothed washers (unlimited adjustment possibilities) - Support cylinders with integrated hose rupture protection (no risk of sinking in the event of any external damage to the hydraulic lines) - Support plates with 2 insert claws Grab Bucket: - Earth grab / two-shell grab with integrated, central closing cylinder, grab rotation device approx. 210° - Dimensions: 750 x 830 mm standard Half Cabin: - Completely lockable with side window, optimal view of the working area thanks to glazing that reaches down to the ground - Windshield can be opened - Entry-side curtain with window - Foldable footrest - Weatherproof, sprung and hydraulically dampened driver's seat - Hot water blower heater Dimensions and Weight: - Length / transport position: 3,600mm - Width: 830mm - Height: 2,115mm - Track min: 830mm - Track max: 1,250mm - Weight: 1,630kg - Wheelbase: 1,680mm - Turning radius: 1780mm

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. Fsdpfxoq Nf Uwj Afrsgi 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Year of construction: 2019, condition: like new (used), functionality: fully functional, DESI-14 Complete Industrial Grinding & Micronization Line – 80 kW – 2019 Manufacturer: Desintegraator Tootmise OÜ, Estonia Model: DESI-14 Year: 2019 Condition: Used – Excellent condition, fully operational Location: Zagreb, Croatia DESCRIPTION For sale: a complete DESI-14 industrial grinding and micronization system, manufactured by Desintegraator Tootmise OÜ, Estonia. The DESI-14 uses high-speed impact technology for efficient size reduction and fine grinding of various industrial materials. A minimum of 2 tons per hour can be processed, depending on the material being micronized. APPLICATIONS: Food industry: milk powder, casein, gelatin, grains Chemical industry: polymers, resins, catalysts, reagents, melamine, pigments Mineral industry: calcium carbonate, mineral fillers, lime, fertilizers, salts, ores Agricultural and biological materials: soybean, wood sawdust, bark, chopped straw DOCUMENTED PERFORMANCE Factory test with calcium carbonate (CaCO₃): Throughput: 2,000 kg/h 92% of particles below 30 μm Feed moisture: 2% TECHNICAL DATA Total installed power: 80 kW Main drives: 2 × 30 kW Rotor speed: approx. 2,965 rpm Rotor configuration: 6 rows Feed hopper: 1.5 m³ Maximum airflow: 1,000 m³/h Power supply: 380 V / 50 Hz Cooling: Water-cooled grinding chamber COMPLETE SYSTEM INCLUDES DESI-14 disintegrator Two complete rotor sets Feeding hopper and WAM screw feeder Cyclone separators Rotary valves and screw conveyors WAMFLO filtration system Exhaust fan Big-bag discharge system Electrical control panel Supporting steel structures and connecting ducts ADVANTAGES Complete industrial processing line Fedpfx Afozy Nbhjrsgi Versatile material applications Documented high-capacity grinding performance Suitable for various industrial powder-processing applications Excellent condition and immediately available. Inspection can be arranged by appointment. Contact us for price, further technical details and inspection. Further technical information, photographs and inspection arrangements are available upon request. Location: Zagreb, Croatia Availability: Immediately available

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments Fgjdpfxsy Au Alo Afrji • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. Fgodpfx Asq Nf U Eefrei The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Year of construction: 2025, operating hours: 225 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973LZT031244, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping Fedpfxoztakyo Afrogi CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.

Year of construction: 2025, operating hours: 210 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973KZT03151, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS Fodjz Hx Rcspfx Afrogi - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.

Condition: used, Year of construction: 2004, operating hours: 41,000 h, machine/vehicle number: M278, Used Filling Monoblock Labeler Polaris for Olive Oil – 1400 BPH If you are looking for a reliable and optimized solution for olive oil production, the Polaris Filling and Labeling Monoblock is an excellent investment. Designed for a speed of approximately 1400 bottles per hour (BPH), this machine is ideal for small and medium-sized businesses looking to increase production efficiency without compromising quality. As a used machine, it also helps reduce acquisition costs while maintaining high performance thanks to its robust structure and reliable technology. 1. Main Features The core of this bottling solution lies in the combination of filling and labeling functions within a single production line. Here are some key highlights: Fjdpfx Afjvvapxjregi Monoblock structure: filling and labeling integrated into one unit. 1400 BPH capacity: perfect for medium-sized businesses. Olive oil compatibility: designed to handle liquids with similar density to edible oil. Ergonomic design: easy access to components for maintenance and cleaning. Simple integration: can be easily added to an existing bottling line. These features ensure maximum operational efficiency and streamline the production process while preserving the quality of the olive oil and delivering a professional finish to each bottle. 2. Benefits of This Hybrid Filling and Labeling Solution Adopting a filling and labeling monoblock can provide significant advantages for those looking to develop or upgrade their olive oil production system: Lower operational costs: a single machine simplifies the production layout and reduces maintenance expenses. Space optimization: thanks to its compact design, the installation area is minimized. Improved quality control: fewer transitions between filling and labeling mean fewer errors and less waste. Flexibility: the machine can be adjusted to accommodate different bottle sizes and label types. With these advantages, the Polaris Monoblock (M278) is particularly suitable for businesses looking to enhance productivity while maintaining high-quality standards. Its speed of approximately 1400 BPH ensures a rapid response to market demands. 3. Maximizing Production Efficiency Olive oil requires specific care to preserve its organoleptic and nutritional properties. This filling and labeling monoblock is designed with these aspects in mind, featuring high-quality components that work together to ensure the delicate nature of the product is maintained. Key factors that help improve production efficiency include: Precise adjustments: the ability to fine-tune the filling volume reduces oil waste. Reduced downtime: an intuitive design that simplifies maintenance and format changes. Smart automation: some processes (such as label management) can be automated, minimizing manual intervention. All these features make the Polaris Monoblock (M278) a valuable asset for those looking to improve their bottling line’s performance, ensuring a continuous and reliabl...

Condition: ready for operation (used), Year of construction: 2015, Demag KBK overhead crane, crane system, crane, chain hoist Crane manual and inspection report available! Manufacturer: Abus Load capacity: 1600 kg Year of manufacture: 2015 Length: 5.85 m Width: 5.5 m Outreach/span: 5480 mm Fsdpfxo Agfvde Afrsgi Wheel diameter: 63 mm Trolley gauge: 850 mm Trolley weight: 150 kg Crane girder profile: HB 250 Chain hoist: Manufacturer: Abus Type: GM 6 1600.6-2 Year of manufacture: 2015 Load capacity: 1600 kg Fine lift: 1.50 m/min Main lift: 6.0 m/min Hook travel: 3 m Dimensions: Height to bottom of hook: 2.20 m Height to bottom of carriage: 2.15 m Support structure: Height: 2.84 m Width: 5.86 m Length: 6.0 m The height of the support structure can be adjusted. You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and separating waste sheets - as is - System equipped with a high-performance sheet feeder for automatic NON-STOP operation ⦁ For fully automatic punching, scoring, and embossing with or without gripper edges ⦁ For removing the inner waste as well as the side and rear sheet edges ⦁ For stacking the punched and removed sheets with the attached gripper edges, or ⦁ For separating the gripper edges and subsequently stacking the remaining sheets ⦁ With a patented gripper carriage register system for maximum registration accuracy ⦁ With a package stacking machine that enables fully automatic feeder operation and NON-STOP stacking, and does not need to be reconfigured even for the smallest cut sizes. (Rotary table with comb structure) ⦁ Separator magazine with electric stock control, can be refilled during production ⦁ With centerline equipment ⦁ With automatic pallet changing device in the stacker Specification Sheet format max. 760 x 1060 mm Sheet format min. 350 x 400 mm Maximum punching force 3.3 MN (330t) Speed 9,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4 %) Machine configuration Feeder • Fully automatic non-stop feeder with logistics for processing Euro pallets, system pallets and disposable pallets • Preset function for W4 feeder • Automatic format adjustment of the suction head • Automatic stack side limitation in the feeder System • Dyset Pro bar system • Lateral sheet alignment based on registration marks or sheet edge, max. ±10 mm • Optical side mark Punching station • Vacuum punching plate for the use of 1 mm punching plates • Pneumatic closing frame with quick-release function • Motorized punching plate fine adjustment via touchscreen, adjustment range ±1.5 mm • Motorized punching pressure adjustment Waste removal • Quick-release frame for fixed tools • Sheet guiding device • Integrated quick-release system with fine adjustment for accommodating waste removal frames with fixed tools Stacker Fgedpfxoz H Smwo Afrsi • Quick-release frame for fixed tools • Brake brush stacker • Integrated quick-release system with fine adjustment for accommodating separating frames with fixed tools

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, LASKA FZ 175 | Emulsifier / Meat Emulsifying Cutter (Micro-Cutter) Manufacturer: LASKA Model / Type: FZ 175 Fedozgxr Nepfx Afregi Serial number: 14127 Year of manufacture: 2012 Power supply: 400 V | 3 Ph | 50 Hz | 155 A Power: 91 kW Diameter: 175 mm Dimensions: 2350 x 1180 x 1300 mm The LASKA FZ 175 is a professional industrial emulsifier, a technologically advanced machine that is a key component of modern meat processing lines. This device is designed for continuous operation in medium and large-sized facilities. It is used for ultra-fine, finely granular processing, emulsification, and homogenization of fillings for sausages, frankfurters, pâtés, mortadella, and other similar products. It performs exceptionally well where a perfectly smooth, stable emulsion structure with minimal air bubbles is essential. The core of the machine is a unique, multi-stage geometry of the cutting system, working in conjunction with a 175 mm diameter disc and driven by a powerful 91 kW motor. The LASKA FZ 175 is distinguished by its patented electro-hydraulic system for automatic adjustment of the knife pressure against the disc. This solution guarantees constant, optimal cutting conditions while minimizing friction. In practice, this allows for a reduction in the wear of the working parts by up to 50% compared to traditional emulsifiers, drastically reducing operating costs and eliminating the risk of overheating the raw material.

Condition: like new (used), Year of construction: 2022, We offer the NOWICKI TYPHOON 90 KN-90 high-speed bowl cutter 2022 – a professional machine for the production of meat stuffing, fat emulsions, raw peel mashes, as well as vegetarian products and pet food. This is a modern TYPHOON series bowl cutter, designed for use in meat, fish, fruit and vegetable processing plants and ready-made meal production, where very fine grinding, uniform product structure and high process repeatability are important. The KN-90 cutter is equipped with a 90 l bowl and a high-performance knife system, which at high rotational speeds allows for ‘cutting in the air’, so that the stuffing does not overheat and retains the desired structure and colour. Stuffing mixing system through reverse rotation back. The electronically controlled drive allows for precise adjustment of the knife shaft and mixing speed, while the touch screen control panel facilitates operation and storage of ready-made technological programmes. The cutter has compact dimensions of 2200 x 1600 x 1630 mm, and the separate electrical cabinet has dimensions of 1000 x 500 x 1500 mm, which facilitates the installation of the set in an existing production hall. The robust, heavy-duty construction, made of stainless steel, meets the hygiene requirements of the modern food industry. Technical data: Fjdox H St Aspfx Afrogi Manufacturer: NOMA Nowicki Machinery Series: TYPHOON 90, Type: KN-90 Year of manufacture: 2022 Bowl capacity: 90 l Power supply: 3×400 V, 50 Hz Power: 39 kW Rated current: 91 A Cutter dimensions: 2200 x 1600 x 1630 mm Electrical cabinet dimensions: 1000 x 500 x 1500 mm Advantages of the NOWICKI TYPHOON 90 KN-90 high-speed cutter: High-speed cutting system – very fine grinding of stuffing and emulsion with short processing time. Homogeneous product structure – the optimal shape of the bowl and the operation of the knives ensure a smooth, repeatable consistency of meat, vegetable and pet food stuffing. Modern control – touch panel, possibility to save technological programmes, full control over speeds and processing time. Universal application – red meat, poultry, fish, vegetables, fruit, plant products and animal feed. Construction – solid steel frame adapted to intensive work in industrial conditions.

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, total width: 1,050 mm, total length: 3,800 mm, total height: 1,750 mm, input current: 5 A, Schou L-2500 Heavy duty universal line boring machine Manufacturer: Schou & Co. Ltd., Copenhagen, Denmark Design: Precision bore machining equipment for line boring engine blocks and gear casings Maximum boring length: 2500 mm Boring diameter range: 25 mm – 200 mm (depending on accessories) Fjdpfxoz Rw T Ee Afrjgi Table length: 2500 mm Spindle speed: Infinitely variable or multi-stage adjustable hydraulic/mechanical drive Feed: Automatic, fine-adjustable longitudinal feed for micron-level surface finish Frame structure: Vibration-free, special cast-iron bed with integrated support bridges Machine weight: approx. 1800 – 2200 kg (depending on equipment) 2. Accessories and equipment • Complete boring bar set (in various diameters and lengths) • Precision clamping blocks and support units for block alignment • Centering bridges and dial indicator measuring devices • Tool setting micrometer • Integrated control panel with emergency stop

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, edge thickness (max.): 25 mm, height adjustment type: pneumatic, actuation type: electric, total height: 1,950 mm, total length: 8,000 mm, total width: 1,300 mm, overall weight: 7,500 kg, This high-performance SCM Stefani Solution XD is engineered for high-volume multi-shift industrial manufacturing, delivering continuous accuracy and a flawless edge finish even on the most sensitive high-gloss or thin-film materials. Equipped with a solid monolithic structure and advanced NC electronic touch controls, this specific 4-cabinet configuration maximizes stability and houses a comprehensive setup of high-end processing aggregates. Manufacturer: SCM Group (Italy) Model: Stefani Solution XD Configuration: Right-Hand Feeding Condition: Excellent, Fully Operational Location: Plovdiv, Bulgaria Availability: Immediate Estimated Footprint & Shipping Dimensions Total Machine Length: Approx 8,000 mm Total Transport Length: Approx. 8,300 mm (including extended infeed guides) Fedpfezcccrox Afregi Machine Width: Approx. 1,300 mm (transport width with side panel supports retracted) Machine Height: Approx. 1,950 mm (with safety hoods closed) Estimated Operating Weight: 7,500 kg Technical Specifications Feed Speed: Up to 25 – 30 m/min (NC-controlled variable track speed) Panel Thickness Capacity: 8 mm to 60 mm Edgeband Thickness Capacity: 0.3 mm to 22 mm Max Coiled Edge Capacity: 3 mm Actuation Type: Pneumatic & Multi-Axis Electronic Servo Motors Height Adjustment: NC-Motorized Automatic Top Belt Pressure Beam Pneumatic Requirement: 6 bar Control System Software: Maestro Pro-Edge / Active Edge Interface Premium Installed Working Units (Aggregates) This machine features a robust multi-station arrangement with a multi-hose high-efficiency central dust extraction layout: Pre-Milling Unit: High-capacity dual cutter block layout utilizing Hydro-Lock tool connections to guarantee zero vibration during panel edge squaring. Advanced Gluing Station (VC-600): Plasma-treated glue pot capable of rapid EVA and PUR hot-melt changes, backed by rapid pre-melting technology. End-Trimming & Fine Trimming Units: Rigid, low-inertia dynamic structures built to ensure zero scoring on fragile surfaces. Round 4 Corner-Rounding Unit: Multi-axis 4-motor high-speed profile rounding unit processing at up to 30 m/min. Finishing Stations: Multi-edge profiling scrapers, glue scrapers, and motorized buffing units for an out-of-the-box clean edge. Automated Axis Positioning: Complete machine changeovers happen in minutes directly from the touchscreen console, maximizing uptime. Top Track Pressure Belt System: Secures fragile components far better than traditional small-wheel setups to keep protective films pristine. Energy Management Built-In: Programmed with the SAVENERGY system to reduce plant power consumption during cycle idle times.

Condition: used, Year of construction: 2002, power: 90 kW (122.37 HP), The CFS ChunkMaster 400 industrial grinder is a heavy-duty machine designed for meat processing plants that require exceptional performance, consistent raw material particle size, and the highest quality finished product. The machine is based on the proven Wolfking/CFS grinding platform, later continued as part of the GEA product portfolio, which is why the ChunkMaster 400 enjoys an excellent reputation in the industry for its reliability, durability, and low maintenance costs. Technical Specifications of the CFS ChunkMaster 400 Meat Grinder Fjdpjzmgqtofx Afrogi Manufacturer: CFS Model: ChunkMaster 400 Equipment type: Industrial meat grinder Year of manufacture: 2002 Grinding system diameter: Ø400 mm Power supply: 400 V, 3-phase, 50 Hz Current draw: 162 A Power: 90 kW Dimensions: What is the CFS ChunkMaster 400 meat grinder used for? The ChunkMaster 400 is designed for grinding a wide range of meat raw materials: beef, pork, poultry, fat, and trimmings, as well as fresh, chilled, and slightly tempered meat. The machine is well-suited as part of a raw material preparation line for the production of sausages, ground meat mixtures, burgers, pet food, and convenience products. The large feed hopper, with a diameter of Ø400 mm, allows for the processing of significant quantities of raw material while ensuring gentle handling of the product and minimal temperature increase during grinding—which directly impacts the quality and shelf life of the finished product. Design and Cutting System The ChunkMaster 400 grinder is equipped with a robust stainless steel frame, a durable feed auger, and an industrial gearbox designed for continuous operation in large meat processing plants. The raw material feeding system ensures a smooth and uniform product flow, minimizing compression—thereby preserving the natural structure of the muscle tissue and resulting in a higher-quality final product. The machine can be configured with various Unger cutting sets, allowing for raw material particle sizes ranging from coarse pre-grinding to fine grinding, depending on the blades and screens used. Key advantages of the CFS ChunkMaster 400 grinder Large grinding system with a diameter of Ø400 mm, Exceptionally high production capacity, Gentle handling of raw materials, Minimal temperature increase during grinding, Excellent preservation of meat particle structure, Industrial-grade, heavy-duty gearbox and hygienic stainless steel construction, facilitating access for cleaning and maintenance, Easy access to replacement parts; screens, cutting blades, and drive belt included One of the greatest advantages of the ChunkMaster 400 grinder is the continued availability of replacement parts. Many mechanical components remain compatible with later CFS MaxiGrind and GEA MaxiGrind series, and independent manufacturers continue to offer OEM replacements—which significantly facilitates the long-term operation and servicing of this machine.

Year of construction: 2010, condition: good (used), Ref. -No.: 10322 Manufacturer: EKO PILL Type: PMPO 950 K Year of construction: 2010 Further information: The PMO 950K carousel jet washer is revolutionary maintenance-free washer, extremely compact and aesthetic structure, designed for oil contamination, machining emulsions and loose chips from washed objects. Despite its minimized dimensions, it works perfectly together with automated production lines for thorough washing, and optional rinsing and drying of moving parts on the internal conveyor. Short distance between station Loading and unloading facilities make it flexible. Washing, rinsing as well as drying operations take place in closed circuits, which significantly reduces costs - Gravity oil separator OGP - Fine filter EKO-PIL 20 µm - Vapor condenser with liquid regeneration Fgjdpo Ahmuljfx Afrji - Drying heat recovery - Washing - Rinsing / Maintenance - Drying

Condition: ready for operation (used), Year of construction: 2021, Abus EHB overhead crane, crane structure, crane, suspended rail system, suspended crane, chain hoist 160 kg Freiburg Inspection report available! Manufacturer: Abus Load capacity: 160 kg Year of manufacture: 2021 Cross traverse: approx. 2.70 m Longitudinal rail: approx. 6.75 m Outreach/span: 2375 mm Track gauge: adjustable Chain hoist: Manufacturer: Abus Type: GM 2 160.6-1 Year of manufacture: 2021 Load capacity: 160 kg Fine lift: 1.50 m/min Fsdpfxo Ah R Nfs Afregi Main lift: 6 m/min Hook travel: 3 m You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Fgedpfsx R Df Sex Afrsi Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Year of construction: 2018, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Sommer, 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of ... Fgedpfx Afj Ahxytsrei

Condition: excellent (used), functionality: fully functional, 3000L paddle mixer with column loading system | Double-shaft mixer for meat and fillings Fgodpfxoz Rq Hrs Afrji Type: Double-shaft paddle mixer Bowl capacity: 3000 liters Mixing system: Double paddle shaft Discharge system: Pneumatically/hydraulically operated bottom/front flap Loading system: Integrated column lift This 3000-liter double-shaft paddle mixer is a highly efficient machine designed for continuous industrial operation. It is suitable for use in large meat processing plants, butcher shops, delicatessen facilities, ready-to-eat food factories, and in the pet food and vegetable processing industries. It is designed for mixing, standardizing, and gently kneading various types of meat fillings, finely and coarsely ground sausages, salads, dumpling fillings, or vegetable mixtures. The core of the machine is a double paddle shaft system with specially shaped scrapers, which ensure fast, uniform, and thorough mixing of the entire batch without damaging the raw material's structure. The counter-rotating motion of the paddles eliminates dead zones in the bowl, allowing for optimal distribution of spices, brines, and functional additives. The integrated column lift enables the automation of the loading process. The machine features a robust construction that prevents vibrations during operation with heavy loads. The appropriately shaped bottom of the chamber, combined with the pneumatically operated discharge flap, allows for quick and hygienic discharge of the finished product directly into a buffer, unloader, or onto a conveyor belt.

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher Fgodpfex R Dh Hox Afrei   Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Fjdpoz A Hh Uofx Afrjgi

Condition: used, Year of construction: 2026, functionality: fully functional, CORMAK FM350 Dust Collector – Industrial Sawdust and Chip Extraction System The CORMAK FM350 is an industrial-grade dust extraction system designed for efficient and reliable removal of sawdust, chips, and fine particles in professional woodworking facilities. Thanks to its powerful suction performance, large-capacity collection bags, and the ability to connect up to four woodworking machines simultaneously, the FM350 provides effective dust control even in demanding production environments. Key advantages Powerful 3.8 kW motor (400 V) – ensures reliable continuous operation in industrial conditions. High airflow capacity of 4,860 m³/h – efficiently removes large volumes of sawdust and wood chips. Heavy-duty metal centrifugal fan – durable steel impeller provides quiet, vibration-free operation. Robust steel construction – powder-coated finish protects against corrosion and mechanical damage. Adjustable leveling feet – allow precise positioning even on uneven floors. Six 200 L collection bags – large waste capacity reduces the frequency of emptying. Quick bag replacement system – steel clamps enable tool-free and fast bag removal. Connection for up to four machines – suction manifold with 1 × Ø180 mm and 4 × Ø100 mm outlets provides flexible installation options. Construction and technology The CORMAK FM350 is equipped with a durable steel centrifugal fan and a reinforced support structure designed for intensive industrial operation. High-quality components ensure resistance to overloads and long-term reliability. The modern bag mounting system allows quick maintenance and convenient replacement of filtration and collection bags. Precision and performance Thanks to large-surface fabric filter bags and high suction pressure, the CORMAK FM350 dust extractor provides excellent working conditions even during heavy-duty woodworking operations. Effective dust removal improves air quality, increases operator comfort, and contributes to a safer production environment. Applications The CORMAK FM350 is designed for: Fgedpfx Ae Afnk Nofrji wood processing plants – extraction from saws, planers, routers, and other woodworking machines professional carpentry workshops requiring multi-machine extraction technical schools and training facilities large industrial halls requiring a high-capacity sawdust extraction system Standard equipment 3 fabric filter bags 3 fabric collection bags Suction manifold: 1 × Ø180 mm / 4 × Ø100 mm Optional equipment Galvanized hose clamps 3-micron filter cartridge Technical specifications Parameter Value Extraction capacity 4,860 m³/h Collection bag volume 3 × 200 L Number of bags 6 Suction connections 1 × Ø180 mm, 4 × Ø100 mm Dimensions (L × W × H) 2355 × 590 × 2150 mm Weight 125 kg Motor power 3.8 kW Power supply 400 V / 3-phase PLEASE NOTE!!!! This machine is a returned item; it comes without its original packaging or splitter. NO WARRANTY AND NO RETURNS!

Condition: excellent (used), functionality: fully functional, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 26,390 kg, drive condition: 75 %, Year of construction: 2023, operating hours: 2,360 h, Equipment: UVV, adjustable boom, gripper hydraulics, hammer hydraulics, Hyundai, Crawler Excavator, HX235ALCR ENGINE Cummins B6.7 / STAGE V Engine Power: 173 hp (129 kW) at 2,200 rpm HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power Modes, 2 Work Modes, User Mode Fgedpfszdrbljx Afroi Variable Power Control Electronic Pump Flow Control (EPFC) Flow control for attachment mode Idle Auto Function Automatic Engine Shutdown Electronic Fan Control CAB AND INTERIOR CAB ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12V power outlet (24 VDC to 12 VDC converter) Electric horn All-weather steel cab with 360° panoramic view Safety glass, toughened Windshield as a sliding window Sliding glass window (left) Lockable door Storage compartment and ashtray Transparent cab roof liner Sun visor Door and cab locks, one key Pilot-controlled joystick with pre-control pressure assist Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheater) CENTRAL MONITORING 8" LCD display Engine RPM or odometer/speedometer Engine coolant temperature gauge Maximum power Slow/fast travel speed Idle Auto Function Overload warning with alarm Engine check Air filter clogged Indicators ECO indicators Fuel level indicator Hydraulic oil temperature indicator Fuel preheater Warnings Communication error Low battery capacity Clock SEAT Mechanically suspended, heated driver's seat CAB WITH ROPS ROPS (Rollover Protective Structure) ISO 12117-2 SAFETY Work Mode Master switch, battery Rear-view camera Four front work lights (2 on the boom, 2 on the front frame) Driving alarm Electronic swing parking system Boom holding system Stick holding system Boom cylinder safety valve with overload warning device Two exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel pre-filter Self-diagnosis system Batteries (2 x 12 V × 100 Ah) Accumulator for lowering work equipment UNDERCARRAGE Lower frame cover (standard) Ground plates Triple-plate ground plates (600 mm) Track roller guides Boom 5650 mm (Variable length boom) Boom safety valves (Variable length boom) Stick 2920 mm Stick safety valve (on variable length boom) With bucket linkage Upper carriage for variable length boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for rotation function Lines for quick coupler Long crawler undercarriage with blade holder Ground plate 1 pedal (Variable length boom/2-way) Crawler tracks 600 mm (triple-plate) Front blade Reinforced lower frame plates 19 inch Kawasaki joysticks + EPFC Proportional joysticks Fine swing control Swing lock One-pedal straight-line travel system Air-suspended, heated seat SmartKey + button + auto shutdown Fuel filling pump Air compressor Hyundai HX paint With work light on the boom (LED) Work light at the front of the cab (LED) Work light at the rear (LED) All-around view monitor (AAVM) FOG protection (front and top) Laminated 7mm window glass Fuel preheater Central lubrication Beka (Variable length boom) (Europe) Hydraulic oil - VG46 Turbo II air precleaner Hydraulic quick coupler CW40 with LH, with one digging bucket

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches Fedpfx Afszqt Dnorjgi • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system