Used Angular Gear for sale (6,956)

Year of construction: 1970, condition: used, Cordia S26 Gear Drilling Machine Drilling capacity in steel (diameter) 26 mm throat 280 mm Drilling stroke 100 mm Total power requirement Isdpfx Ahem Sg Rkevsap 1000 Watt , 380 V Machine weight approx. 355 kg Space requirement approx. 1060 x 1000 x 2100 incl. base plate mm Height max .500 mm Table surface 330 x 270 mm Number of spindle rotation 6 steps spindle speeds 95 - 1450 rpm Control conventional

Condition: used, Year of construction: 2003, grinding wheel diameter: 400 mm, helix angle: 45 °, wheel diameter: 1,500 mm, Used Höfler Rapid 1500, built in 2003 Iaedpfx Ahev U D Tfsvjp Mahr measuring system Interlit oil preparation system Location: Australia

Year of construction: 2010, condition: excellent (used), Getriebe SK 4282AF VL-132MH/4TF ,i = 26,3 , n2 = 55 Iajdpjg Ixy Dsfx Ahvep E-Motor SK 132MH/4TF FIG12K , 7,5 kW,1.460 U/min, mit Fremdbelüftung, mit SINAMICS PM 240 6SL3224-0BE27-5AA0 und SINAMICS Control Unit CU 240S DP F

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Iedpfx Ahjf Axn Uoveap Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Ijdpofxg T Uofx Ahvoap Good condition

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Iedpfx Aedzp U Ajhvoap Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base - Straightening machine was used for cardboard approx. 350 x 1.5 mm Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: used, length 575 mm width 510 mm height 1015 mm Clamping table, clamping plate, T-slot table Dimensions Iasdoylz Edspfx Ahvop Table length: 575 mm Table width: 510 mm Table height: 1015 mm

Condition: used, length 1000 mm width 800 mm height 630 mm weight 460 kg T-slot - width 50 mm Clamping table, clamping plate, T-slot table Dimensions Table length: 1000 mm Iajdpfx Ajgrngdshvsp Table width: 800 mm Table height: 630 mm T-slot length: 50 mm Weight: 460 kg

Condition: used, Year of construction: 2008, Technical details: max. wheel diameter: 300 mm gear width: 60 mm max. module: 5 Iasdpfx Ahjxz Akfjvjp weight of the machine ca.: 14 t table turning speeds: 80 - 200 U/min adjustment movement of the stroke: 400 mm length of stroke min./max.: 0-70 mm no. of strokes: 1500 Hub/min *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 table diameter: 168,14 mm boring diameter: 65,532 mm weight of the machine ca.: 11 t Iasdpfx Ajxz Avbjhvep table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 80/120 mm max. module: 2,5 max. top circle diameter: 65 mm : 22 mm : 140 mm : 120 mm slide travel axial ( Z-axis ): 320/400 mm Dimensions (L/W/H): 3270 x 3240 x 2020 mm weight of the machine ca.: 6 t P60 - The compact all-rounder for wheels, shafts and worms The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. Iodpoxrwpkjfx Ahvoap with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1 *

Condition: used, Year of construction: 2015, Technical details: Iedpfxsl Ha Ubo Ahvjap weight of the machine ca.: 4 t

Condition: used, Year of construction: 2001, Technical details: Iodpjxxl Sgefx Ahveap max. wheel diameter: 50 mm gear width: 20 mm max. module: 4 mm min. module: 0,1 mm total power requirement: 12,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,2 x 2,5 x 2,3 m workpiece length - max.: 300 mm

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 275 mm gear width: 55 mm max. module: 6,5 min. module: 1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Iodpsv N Hilofx Ahveap Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. *

Condition: used, Year of construction: 2005, Technical details: Iedpfx Ahoizlh Hevoap weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Pick-up machine *

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Ijdpfx Ahjwuz Irjvjap Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor Iodot E D I Tjpfx Ahveap -Manufacturer: Bockwoldt, spur gear motor -Type: CB9-132M/6D -Speed: 20 rpm -Power: 5.5 kW -Shaft: Ø 65 mmx160 mm -Protection class: IP44 -Height shaft axis: 315 mm -Hole spacing across: 360 mm -Hole spacing lengthwise: 300 mm -Dimensions: 875/450/H500 mm -Weight: 231 kg

Condition: used, functionality: unexamined, Ferwood Code: RU0011862 - Manufacturer Code: 4-070-01-0901 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer overhaul service, please contact us. 9KG, 46X39X27 Iaedjylbccepfx Ahvsp

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Iaedpfx Aovkpu Hohvsp Counter holder milling mandrel is missing *

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 180 mm gear width: * mm max. module: 4 total power requirement: 14 kW weight of the machine ca.: 8 t slide travel axial ( Z-axis ): 300 mm work piece - max.: 490-640 mm Iajdpfxjyk Ur Uo Ahvsp

Condition: used, Year of construction: 2005, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm diameter of tools min 69,85 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm Isdpfxoynmm Ee Ahvoap work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available

Condition: used, Year of construction: 2007, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm diameter of tools min 69,85 mm tooth width max. 58 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Iajdsynbdlopfx Ahvsp Control 160 i - MB FANUC total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI With EWAB robot cell (KUKA robot) without coolant filter system Fire extinguishing system without CO2 bottles Cooling oil return with various pumps / collecting basins Threading device A1/B2 axes with measuring probe Clamping device for a pinion shaft External spindle oil cooler Extraction system "pinion shaft"

Condition: excellent (used), Year of construction: 2009, max. wheel diameter 315 mm gear width 280 mm max. module 8 min. module 1 Control Siemens 840 D distance cutter centre - clamping area 20 - 245 mm distance spindle /table 190 - 470 mm diameter of hob 160 mm tangential adjustment 110 mm ical angle 45 ° min. number of teeth 4 / 8 cutter length max. 200 mm table surface area 295 mm milling spindle speeds (infinitely variable) 50 - 400 U/min total power requirement 58 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,1 x 3,5 x 2,6 m The machine was completely overhauled by SerWeMa in 2009 Iasdpex N Ndkefx Ahvep equipped with a Siemens Sinumerik 840D control. Possible uses: Straight and helical gears, crowned or tapered spur gears, Worm wheels for single or multi-start worms, Worms, sprockets, ratchet wheels, splines

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min Iodpfxsx N Nddo Ahveap min. number of teeth 4 clamping length max. 200 mm Control Siemens max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece Iedpfx Aheciw Smovsap -Dimensions: 800/300/H350 mm -Weight: 68 kg