Used Angle Gear for sale (13,086)

Condition: like new (used), Year of construction: 2010, Cast iron clamping angle, manufacturer SAV, type: AW71863, year of manufacture approx. 2010. Like new, with 315mm Röhm chuck, bore 100 mm. Nodpshcimwefx Ad Sewh Width: 500mm, depth: 310 mm. Height without base plate: 550 mm, height with base plate: 585 mm. Base plate: 500 mm x 400mm. Center height: chuck: 325 mm. Hardly used. Very good condition. Includes chuck key.

Condition: used, Year of construction: 2002, technical data only send through email. Nodpfszb Rdzsx Ad Sewh

Condition: used, Power: 0.18 kW Nwodpfx Adoqgm Tis Soh For edge banding machine Homag type KL 37 DS or similar.

Condition: used, Star gear P.I.V 2.7kw Manufacturer: P.I.V Type: LN4 K Power: 2.7kw Nedpoudyu Eefx Ad Sowh Revolution: 50/min

Condition: excellent (used), rotational speed (max.): 55 rpm, type of input current: three-phase, Geared motor, drive motor wiht brake several pieces for sale from stock. Manufacturer electric motor ziehl abegg RFZU180 Manufacturer Gear Sew-eurodrive S92 LP180 Output 1.42 / 8.5 kw Speed 8/55 brake Nwsdpfxedyd Nxj Ad Seh - Bevel gear Protection IP 23 -Weight 350kg Purchase, Acquisition, asset management of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, functionality: fully functional, rotational speed (max.): 90 rpm, Electrovariable electric motor 1.8kw, 3.2-90 1/min Manufacturer: Getriebebau NORD 32-RV30-90 L/8-2 BRE16 Power: 0.45/1.80 kw Voltage: 230/400 V 50Hz 0.31A Rotation: 3.2-90 1/min IP44 Shaft diameter: 40mm Weight: 50kg Gearbox: Manufacturer: Getriebebau NORD Type: 90L/8-2 BRE16 IP54 Nwsdoud H Sdspfx Ad Sjh

Year of construction: 2009, condition: excellent (used), MASS NC steep conveyor, angle conveyor Angle conveyor belt with substructure Conveyor belt length: 1,500mm flat + 1500mm rising. Dropping height: approx. 1400mmmm. Description: available immediately, Ready to ship more pieces Belt speed: 7m/min T 30 studs Welded stud height 30 mm Drive: 0.37 kw 380V 50Hz Height-adjustable angle conveyor belt with adjustable angles Feed part 1500 mm Riser section 1500 mm Usable width 850 mm Nodpfx Aepby Urod Sewh Stud height 30 mm Belt speed: 7m/min Standard control with emergency stop/stop button External width 950 mm (without motor) PU strap color green L studs Stud spacing approx. 450 mm Stud height 30 mm Standard control with emergency stop/stop button mobile on steerable stop rollers Lateral collecting plates in the feed section

Condition: used, Geared electric motor, 8.5/1.4kW, angular drive, clutch, brake elevator motor Nwsdpfjud H Daox Ad Ssh Drive electric motor, 8, 5/1, 4kW, rev. 9-54 angle drive Lift motor Ziehl-Abegg Rfzu180.31-2/12 380V / 50Hz 8, 5/1, 4kW Drive torque: 1114 Nm Rev.: 9-54 rpm Angular drive, clutch, brake gear several pieces for sale from stock.

Condition: excellent (used), Year of construction: 1974, I am selling this machine. It can be tested when connected. Maximum module 25 mm Maximum gear diameter 500 mm Maximum machining length 3,000 mm Maximum table load 4,000 kg Nwsdev Nqq Tjpfx Ad Sjh Maximum cutter diameter 250 mm Maximum cutter length 300 mm Total power 25 kW Machine height 2,100 mm Machine length 7,600 mm Machine width 2,800 mm Machine weight 27.1 t You can send a video of the machine via whatsapp.

Year of construction: 2022, operating hours: 1,700 h, condition: excellent (used), functionality: fully functional, cutting length (max.): 6,500 mm, machine/vehicle number: C127713, Twin head cutting-off machine, for cutting aluminium and PVC bars in various thickness and angles. Nwsdpfx Adszb I N Ij Ssh

Condition: ready for operation (used), functionality: unexamined, Gear hobbing machine – Celta model C4, with a cutter diameter of 480 mm, maximum workpiece diameter of 550 mm, and maximum module of 8. Total power: 9 kW, estimated weight: 4500 kg. Nsdozbzygspfx Ad Sewh

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Machine without tools Location: Nattheim Nwjdpfx Ajvvi Ttod Sjh

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Location: Nattheim Nwjdpfx Ajwhzg Usd Seh

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm Nedpfx Adopxmlio Sjwh column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Condition: excellent (used), max. wheel diameter 200 mm Njdpfsy Umi Isx Ad Sswh gear width 300 mm module 0,5 - 25 centre distance 750 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 0,8 x 0,6 x 0,6 m worm testing roll-machine

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm max. module 2,5 Njdpey Umizefx Ad Sewh min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Control Siemens max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: used, Technical details: Nwedpfov U T Dyox Ad Ssh center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: used, Technical details: clamping surface area: 1000 x 500 mm weight of the machine approx.: 530 kg dimensions L x W x H: 0,5 x 1,0 x 0,49 m Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm * Nwsdpfx Adsu Rd Nij Soh

Condition: used, Technical details: z-travel: 1250 mm Nwsdsv U Un Hopfx Ad Sjh swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: used, Technical details: clamping surface area: 630x400 mm no. of flutes: 8 rotatability of the table - manual/mechanic: 360 v. Hand ° weight of the machine approx.: 175 kg Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25mm; c=9mm foot plate: size 380x300mm with 6 clamping slots WxL=14x20mm * Nwodpsu Nkrbefx Ad Seh

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 130 / 80 mm gear width 180 mm max. module 4 min. module 0,5 spindle turning speed - stepless 300 - 3000 U/min control Siemens 840 D x-travel 200 mm y-travel 170 mm z-travel 250 mm Nedpfxoxlug He Ad Sswh milling head -swivable +/- 45 ° table diameter 168 mm table hole 65 mm clamping length max. 245 mm table turning speeds 0 - 1000 U/min total power requirement 51 kW weight of the machine ca. 9,2 t dimensions of the machine ca. 4,5 x 4,0 x 3,2 m

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 350 mm gear width 230 mm max. module 8 min. module 1 Control Siemens 840 weight of the machine ca. 10,5 t dimensions of the machine ca. 4,5 x 2,5 x 3,0 m Loading unit, very good condition. Nwjdpey D T Upefx Ad Soh

Condition: excellent (used), max. wheel diameter 5 - 630 mm gear width 500 mm max. module 20 min. module 0,5 workpiece weight 350 kg Control IBH Macro max. workpiece diameter 630 mm clamping length 1050 mm total power requirement 1,8 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,0 x 0,7 x 2,4 m Spur gear software for internal and external gearing Profile inspection standard crowning head - root relief K - profile Direction test standard crowning head - root relief K - profile graduation test Axis position correction for on-the-fly measurements up to 0.2 mm axis position error Nedpfx Adjyyqtzj Sowh Snail software 3 carriers for gears, 1 carrier block, calibration device, Windows 7

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 20 - 320 mm gear width 150 mm max. module 8 min. module 1 Nwjdpfx Asv Nracjd Seh surface area 1200 x 190 mm tool diameter 175 - 260 mm turning speeds 45 - 465 U/min Control Siemens total power requirement 13 kW weight of the machine ca. 5,2 t Machine in excellent condition, with many accessories. Retrofitted in 2014, Siemens control system.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Max diam 750mm, Z axial travel 900mm, X Radial travel 380mm, table 630mm, CNC Siemens 802D in Z and X. Weight ca 14.000kg Nwsdpfx Adjzbt Iie Soh