Used Amada Arcade 212 for sale (220)

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 500 mm, table load: 1,000 kg, type of input current: three-phase, overall weight: 5,000 kg, grinding spindle motor power: 7,500 W, grinding wheel speed: 2,500 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Prsdpfxewulg Ej Adnjd CNC control : FANUC series 32i-B W axis travel (longitudinal axis) : 1000 [mm] Min stroke speed W axis : 0.1 [mm/min] Max stroke speed W axis : 40000 [mm/min] Rapid traverse rate W axis : 40000 [mm/min] X axis travel (transverse movement) : 450 [mm] Min stroke speed X axis : 0.1 [mm/min] Max stroke speed X axis : 5000 [mm/min] Rapid traverse rate X axis : 5000 [mm/min] Resolution X axis : 0.0001 [mm] Stroke Y axis (vertical movement) : 500 [mm] Min stroke speed Y axis : 0.1 [mm/min] Max stroke speed Y axis : 500 [mm/min] Rapid traverse rate Y axis : 2000 [mm/min] Resolution Y axis : 0.0001 [mm] Table length : 600 [mm] Table width : 400 [mm] Max distance spindle nose / table : 500 [mm] Max load on table : 1000 [Kg] Grinding wheel min speed : 300 [rpm] Grinding wheel max speed : 2500 [rpm] Grinding spindle motor power : 7.5 [kW] Max diameter grinding wheel : 355 [mm] Max grinding wheel width : 50 [mm] Grinding wheel bore : 127 [mm] Total power required : 23 [kVA] Weight : 5000 [Kg] EQUIPMENT / INCLUDED OPTIONS: x1 electro-magnetic chuck 600 x 400 [mm] x3 glass linear scales on the 3 linear axes x1 workpiece probe x1 paper filtration unit x1 oil chiller DAIKIN AKZ149M133 x1 oil mist collector IFS type IFMC 1100 x1 transformer The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed

Condition: excellent (used), Year of construction: 2011, operating hours: 13,900 h, functionality: fully functional, Machine is in very good technical condition. Despite it`s age, wear is very low. It was used for individual special production, not for serial. Machine is placed and connected at K-system company in Žiar nad Hronom, Slovakia. There you can see it personally. We will be helpfull with loading on truck process organization. Pedpfxjxbdaue Adnerd

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,600 h, control type: CNC control, controller model: Fanuc 32 C, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program Pedpfsw I Tt Ssx Adnjrd 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 12,096 h, Amada hydraulic press brake type HFT 130-3 working width 3100 mm max. pressing force 130 tons CNC-controlled Y1 Y2 X and R axes CNC control CNC OP 2000 Fiessler light curtain Drive power 12.5 kW Weight 8200 kg Predpjxhfuyefx Adnsd

Condition: used, functionality: fully functional, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Amada Promecam Guillotine Shear Type GPX 630 For more information, please contact us BT MACHINES BUYING AND SELLING Psdexgpqvepfx Adnerd ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! Pedpfx Adjxgg Irsnord TECHNICAL DETAILS Laser power: 4 kW Table width: 3,000 mm Table length: 1,500 mm EQUIPMENT Ridel chiller Donaldson extraction unit 2 exchange tables

Condition: ready for operation (used), AMADA PROMECAM 3000 x 6 shears Type GPX 630 Capacity 3000 x 6 Maximum stroke 160 mm Rate 16 to 45 strokes/min Cutting angle from 40' to 2°20' Rear stop stroke 1000 mm Prsdpfxsvt Svrj Adnod Motor 15 kw Approximate weight 6500 kg Dimensions 3750x2000x1850 mm

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 13,800 h, AMADA ASTRO II 100 NT bending cell Pedexgbmcjpfx Adnord Automatic bending/folding cell - press brake with bending robot Manufacturer: AMADA Type: ASTRO 100 NT Year of construction: 2007 Condition: used Control: AMNC II PC Switch-on hours: 38536h Automatic operation: 13739h Pressing force: 100 tons bending length: 3000 mm Tool clamping: AMADA, standard Clearance between uprights: 2700 mm Projection: 415 mm Stroke: 200 mm Installation height: 500 mm Adjustment range backgauge: 600 mm Width of the work table: 60 mm

Condition: like new (used), Year of construction: 2013, Technical Data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation. Robot: Type: M-710iC/50 (FANUC) Robot controller: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Prsdpfx Aexndynodnjd Reach: 2,050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: Full enclosure Robot track: Length: 1,500 mm Travel speed: 60 m/min Repeatability: ± 0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotary axis: ± 720° Tilting axis: ± 90° Laser source: Type: YLS4000-S2T Wavelength: 1,070 – 1,080 μm Laser power: 4 kW Control: Type: Amada Display: 15” LCD colour touchscreen Controlled axes: Robot and linear axis Coordination between robot and laser source Memory: 3 MB SRAM I/O interface: LAN, USB Welding Head: Amada Focus position adjustment: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving System: The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum. NC Focus System: The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera. Condition: Very good condition Machine has been used very little: approx. 16,500 operating hours. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. Prsdpfx Adow Hww Hensd The standard tools are listed in the attached inventory. I can send it to you via email.

Condition: used, For sale is the bandsaw shown in the photos, manufactured by the Taiwanese company Amada, model HA 400 W from 2001. The machine was imported from Germany. It is fully operational and works in both automatic and manual modes. Loading of the machine on site is provided. Pjdpfx Adsxfwmpsnord Technical specifications: Maximum cutting diameter: 400 mm Feeder length: 600 mm Blade size: 4570 x 32 x 1.06 mm Cutting speed range: 15 - 90 m/min Motor power: 5.5 kW Year of manufacture: 2001 Weight: 2000 kg

Condition: ready for operation (used), Year of construction: 2005, General Data Prsdpfsxcztbex Adnjd Machine weight 11600 kg Control Unit Brand AMADA Main Drive Pressing force 1700kN Stroke 200mm This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Application Types Bending

Condition: refurbished (used), functionality: fully functional, Shear Pedpfx Asxfbb Rjdnsrd Brand: AMADA PROMECAM Model: GP1230 Capacity: 3000 x 12 Back gauge: 1000 mm Rear pneumatic sheet support Cylinder seals replaced – Blades sharpened – In compliance

Condition: used, Offer 41414 Pjdpfx Adsxhfhmonjrd Guide unit for punching tool suitable for AMADA type EMK 3612

Condition: excellent (used), Year of construction: 2001, Technical Specifications: Working length: 4230 mm Frame gap: 3760 mm Prodsxhf D Ujpfx Adnod Press force: 170 t CNC control: AMADA Operator Number of controlled axes: 5 Motorized adjustable backgauge Throat depth: 600 mm Stroke: 350 mm Working height: 960 mm Motor power: 16.5 kW CE marking Dimensions (L x W x H): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tonnes Accessories: Side-mounted movable safety guards The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1981, cutting diameter 250 mm dimensions of saw-band 3505 x 25 x 0,95 mm Pjdpfev Ehfaox Adnsrd table height 450 mm cutting speed 10 - 110 m/min total power requirement 3 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 2,0 x 2,2 x 1,4 m Fully automatic band saw - including chip conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 12,800 h, machine/vehicle number: 45881238, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, power: 2 kW (2.72 HP), Equipment: CE marking, cooling unit, documentation/manual, dust extraction, nozzle changer, Working area 2520×1550×300 mm • Table load 330 kg • Ball-screw drives Max thickness: mild steel 10 mm, stainless 8 mm, aluminium 3 mm Predpfxoxgm Tzj Adnod Machine dims 5745×2630×2789 mm • Weight 7.5 t

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Pedpfx Aew Iq Ugednerd Good condition

Condition: used, Year of construction: 1995, Used notching machine from FIM (Amada branded) Type: Goal 204 Capacity: 200 x 200 x 4 mm 90 degree angle Year of manufacture: 1995 Prsdpfewr Aakex Adnod

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,450 h, machine/vehicle number: LST3015F1 / 30158295, control type: CNC control, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, For sale is a high-performance and reliable CNC laser cutting machine from AMADA, model FLC3015AJ with a 2 kW fiber laser source, manufactured in December 2017. The machine is fully operational, in good condition, and ready for immediate use. This system is perfectly suited for precision metalworking, and comes fully equipped with extensive accessories such as an extraction unit, pallet changer table, chiller, and light protection system. Technical Data: • Manufacturer: AMADA Prjdjxftpaopfx Adnjd • Model: FLC3015AJ Fiber Laser 2000 • Year of manufacture: 2017 • Laser power: 2,000 W (fiber laser) • Working range (X/Y): 3,070 × 1,550 mm • Machine weight: approx. 11,200 kg • Control: AMNC 3i with 21” monitor • Pallet changer: AMADA LST3015F1, 3,000 kg, YOM 12-2017 • Extraction system: Herding Comp 1500-8/9 SB, 7.5 kW, YOM 2018 • Chiller: KKT Chillers YBOXX 12, YOM 2018 • Laser welding source: AMADA AJ2000, 2.1 kW • Connected load: max. 8.8 kVA • Safety features: Light curtain protection system ✅ Condition and Notes: • The machine is in well-maintained, used condition • Fully operational and regularly serviced • Includes full equipment package for immediate commissioning • On-site inspection and testing can be arranged by appointment — Location for inspection and pickup: 12277 Berlin Price: €115,000 net plus 19% VAT or Net Export Pickup only – disassembly and transport to be managed by buyer or upon agreement If interested or if you have any questions, please feel free to send me a message. Additional photos and technical details available upon request. All information provided without guarantee, subject to errors and prior sale. Net export price. For domestic deals, plus 19% VAT. For further questions, please call or email. We accept trade-ins and can offset the value of your used vehicle. We also accept defective vehicles, those due for TÜV, or with damage as down payment or part exchange. Trucks, cars, vans, and construction machinery. Just contact us. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype For an extra fee, we handle all customs and registration formalities. We can also arrange transport to the port at additional cost.

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 6212 mm Measurements depth 5436 mm Measurements height 2342 mm Machine weight 21500 kg Main Drive Number of axis 4 Movement X-Axis Movement 3050 mm Y-Axis Movement 1525 mm Z-Axis Movement 37 mm Turret Number of turrets 1 Additional Equipment Air-blow oil-mist lubrication Slug-vacuum system Digital tool ID / barcode system Integrated tapping: inch/metric taps (M2.5–M8) Marking & deburring tools: on-board marking and deburring options This 4-axis AMADA EMZ3612M2 was manufactured in 2016, featuring a high-speed servo-electric turret punch press with twin AC servo direct drive. It boasts a 33-ton press capacity and an AMNC-F / AMNC-4ie CNC system for enhanced control. The machine handles sheet formats up to 3050x1525 mm and includes a "King" turret with up to 58 stations. Energy efficiency is optimized with AC servo drives. If you are looking to get high-quality punching capabilities consider the AMADA EMZ3612M2 machine we have for sale. Contact us for more information. Pedpsxaqmrofx Adnerd Application Types Punching

Condition: excellent (used), Year of construction: 2005, pressing force: 50 t, Hydraulic press brake Fab. AMADA Typ. HFP 50-20 Podpotzcxpjfx Adnord Year 2005 Technical data Make: AMADA Type: HFP 50-20 Year of construction: 2005 Effective length: 2090 mm Capacity: 50 t Passage upright: 1,665 mm Stroke: 200 mm Projection: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: approx. 4.8 t Equipment - Controlled axles: Y1, Y2, X, R, Z1, Z2 - FIESSLER light barrier at the front - Amada upper tool clamping - CNC control 3D AMNC graphics - Rear safety guard (hinged mesh doors) - Swivel operation - front left - Tools: o Upper tool straight, R 0.8mm, H 117mm, length 2,000 mm o Bottom tool V10/88°, length 2,000 mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Predsxfknaopfx Adnod

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Podpoh H Duhjfx Adnjrd Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1997 stock no. 01853 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 2005, Gebruikte 3 meter Amada CNC kantbank Type: HFP 130 3 Capaciteit: 3100 x 130 ton 8-assig (Y1, Y2, X1, X2, R1, R2, Z1 en Z2) Predpfjwz I Irsx Adnjd Bouwjaar: 12-2005 Automatisch Fiessler Alas lasersysteem Euro-stijl gereedschapsklemming met laswisseladapters