Used Amada 8025 for sale (221)

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Hjdpfjwq Dpqex Ahvei Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 800 kN Stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts, but the control does not respond to commands. The previous user replaced the original AMADA control with a DELEM unit.

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 400 mm, installation height: 650 mm, operating speed: 7 mm/s, reverse speed: 55 mm/s, total length: 8,400 mm, total width: 3,100 mm, total height: 4,620 mm, power: 47 kW (63.90 HP), travel distance Z-axis: 300 mm, empty load weight: 90,000 kg, passage width: 7,210 mm, table width: 350 mm, - 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Locking speed: 70 mm/sec Hsdswu Inlepfx Ahvji Power needed: 380V

Condition: ready for operation (used), controller manufacturer: Delem DA65W, throat depth: 410 mm, installation height: 450 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, total length: 4,980 mm, total width: 2,240 mm, total height: 2,840 mm, power: 11 kW (14.96 HP), travel distance Z-axis: 180 mm, empty load weight: 13,000 kg, passage width: 3,760 mm, table width: 180 mm, 7 axes: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Amada bombation Capacity: 170 ton x 4230 mm Hjdjx Immtjpfx Ahvsi Backgauge: CNC Locking speed: 100 mm/sec

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, control type: CNC control, controller manufacturer: TASK, controller model: DBM3, working width: 1,300 mm, input voltage: 380 V, input frequency: 50 Hz, oil tank capacity: 40 l, overall weight: 2,000 kg, total length: 1,400 mm, total width: 1,400 mm, total height: 1,500 mm, year of last overhaul: 2026, Equipment: documentation/manual, PRESS BRAKE SCHIAVI - AMADA RG 25-12 DBM3 TASK. Hsdpfx Ajygvf Ushvji PRESS FORCE: 25 TON TABLE LENGTH: 1300 MM DBM3 TASK 3-AXIS CNC CONTROL. OPERATIONAL AND CONNECTED FOR BENDING TESTS. COMPLETE WITH UPPER AND LOWER DIES.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: TASK, controller model: MASTER 3AX, bending force (max.): 35 t, working width: 2,000 mm, stroke length: 100 mm, throat depth: 400 mm, distance between stands: 1,800 mm, oil tank capacity: 50 l, travel distance X-axis: 600 mm, back gauge: 600 mm, overall weight: 3,500 kg, total length: 2,700 mm, total width: 1,700 mm, total height: 2,200 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: lower tooling, upper tooling, Press brake SCHIAVI - AMADA RG 35-20 Press force: 35 tons Table: 2000 mm Complete with upper and lower dies Fully functional with 4-point motorized backgauges Hjdoygu Uhepfx Ahvoi CE-certified machine with rear safety enclosure Operating video available.

Condition: not inspected (used), functionality: unexamined, Year of construction: 2009, operating hours: 69,572 h, machine/vehicle number: 28510308, sheet thickness (max.): 20 mm, table height: 940 mm, travel distance X-axis: 3,270 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 100 mm, No reserve price – guaranteed sale to the highest bidder! Auction of an Amada laser cutting system + LKI storage tower! Placing a bid obliges the buyer to collect the equipment within the specified timeframe between 23.03.2026 and 27.03.2026! AMADA LC-3015 F1 NT TECHNICAL DETAILS Travel Range X-axis: 3,270 mm Travel Range Y-axis: 1,550 mm Travel Range Z-axis: 100 mm Travel Range B-axis: 21 mm Cutting Area X-axis: 3,070 mm Cutting Area Y-axis: 1,550 mm Cutting Area Z-axis: 100 mm Cutting Speed X/Y: 0 – 60 m/min Rapid Traverse X/Y/Z: up to 120 m/min Table height: 940 mm Workpiece weight: 920 kg Sheet thickness mild steel: up to 20 mm Sheet thickness stainless steel: up to 12 mm Sheet thickness aluminum: up to 10 mm MACHINE DETAILS Control: AMNC-F Control type: CNC path control Controlled axes: X, Y, Z, B Simultaneously controlled axes: X, Y, Z Laser model: FANUC AF4000i-B Laser type: CO₂ laser Laser class: 4 Laser radiation: invisible Laser principle: AC-HF excited, fast axial flow Rated power: 4,000 W Max. power: 4,000 W Peak power: 5,000 W Stability: ±2 % Frequency range: 5 – 2,000 Hz Pulse duty cycle: 0 – 100 % Wavelength: 10.6 µm Laser beam diameter (output): 27 mm Laser beam divergence: < 2 mrad Cooling & Supply Chiller throughput: > 160 l/h Power supply: 55 kVA Positioning laser Laser class: 3R Laser radiation: visible Rated power: < 5 mW Pulse duration: CW Wavelength: 0.6 – 0.7 µm Laser medium: Semiconductor or HeNe Drive type: Linear drives Cutting gas regulation: automatic Machine weight: approx. 11,000 kg LKI ASLUL 300 F1 Storage Tower (Year of manufacture: 2009) TECHNICAL DETAILS Cycle time: approx. 3 min Pallet changeover time: approx. 50 s Raw sheet / unload pallets: 2 + 4 or 3 + 3 Maximum pallet weight: 3,000 kg Sheet size: max. 3,000 × 1,500 mm Sheet size: min. 2,000 × 1,000 mm Material thicknesses Automatic mode: 0.8 – 20 mm Shuttle mode: 0.8 – 25 mm Load data Sheet weight: max. 920 kg Load on cutting pallet: max. 920 kg Stack heights Raw sheet pallet stack height: max. 150 mm Unload pallet stack height: max. 220 mm Finished part size Finished part size (X × Y), free cut: min. 225 × 180 mm MACHINE DETAILS PLC: Mitsubishi Q-Series Operator interface: Beijer E1060 Dimensions & Weight Dimensions (L x W x H): approx. 4,630 x 4,225 x 6,000 mm Total weight: approx. 11,000 kg EQUIPMENT Double sheet detection Hsdoycqfuspfx Ahvji Overall dimensions (Amada + storage tower) Overall dimensions (L x W x H): approx. 11,000 x 10,000 x 6,000 mm Total weight: approx. 22,000 kg SCOPE OF DELIVERY Available manuals Note: The power supply displays an error message. It may be defective.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: TASK, controller model: MASTER 3 AX, working width: 2,500 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, control voltage: 380 V, oil tank capacity: 70 l, overall weight: 5,000 kg, total length: 2,800 mm, total width: 1,800 mm, total height: 2,200 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, finger protection, type plate available, Press brake SCHIAVI - AMADA RG 50-25 Press force 50 tons Table length 2550 mm MASTER TASK 3-axis CNC control Complete with upper and lower dies Hjdpsygu Alefx Ahvji Fully functional and connected for tests and video

Condition: used, Year of construction: 2007, pressure 170 t chamfer lenght 3000 mm distance between columns 2750 mm Hjdpfx Ahoxyzy Novji Stroke beam 200 mm max. opening beam/table 520 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 700 mm R1 and R2 axis controlled by cnc 250 mm Z1+Z2 axes controlled by cnc 0-2500 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 36820 h length 3600 mm width 2200 mm height 2850 mm weight 12000 kg total power requirement 16,5 kW dimensions of the machine ca. 4x2,5x3 m Control Amada AMNC All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 2008, table length 2550(5040) mm table width 1550 mm burner heads 1 axis stroke (X,Y,Z) 2520(5040)x1550x300 mm laser capacity in Watt 4000 watt control AMNC-F Number of working hours 34981 h Steel sheet steel 12 mm Thickness V2A 8 mm Thickness Alu 6 mm Hjdpfx Ahsvf Rhdovji Cutting speed X/Y/Z 80/80/60 m/min max. table load 330 kg Laser gas consumption L/h Dimensions of machine: length 6000 mm width 2600 mm height 2300 mm weight 7,7 t Power connection 69 kVA

Year of construction: 2004, condition: used, table length 1250 mm table width 1250 mm burner heads 1 Control Fanuc output 1000 Watt travel -z axis 100 mm Hjdpfx Ashly Hlohvoi travel x / y 1260/1260 mm traversing speed 30/30/42 mm/sec gas consuption 10 Liter/Std. total power requirement 22 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 10 m

Condition: good (used), functionality: fully functional, We are selling a used Amada CTB 400 (carbide-capable bandsaw) with 3m powered roller conveyor and 6m outfeed roller conveyor. Technical specifications: - Cutting capacity round: 430 mm - Cutting capacity square: 430 x 430 mm - Cut-off length: 5 - 9999 mm - Bandsaw motor power: 7.5 kW - Total power: approx. 10 kW - Saw blade dimension: 4715 x 41 x 1.3 mm (suitable for carbide) - Variable blade speed: 15 - 150 m/min - Feed length: 10 - 9999 mm - Minimum remnant length: 15 mm - Dimensions (W x D x H): 2630 x 2740 x 2422 mm - Weight: approx. 4500 kg CNC control: Speed / Power Hjdswybkdepfx Ahvsi Material / Cross-section Parallelism display Automatic parameter correction

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Hjdpfev S U Izjx Ahvji Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, control type: CNC control, actuation type: electric, working width: 4,000 mm, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 4 mm, input voltage: 380 V, input frequency: 50 Hz, total width: 4,300 mm, total height: 1,800 mm, number of support arms: 2, year of last overhaul: 2026, Equipment: documentation/manual, type plate available, SCHIAVI-AMADA GH540A guillotine shear, fully operational and ready for use, complete with sheet metal evacuator and programmable positioner ENC1 TASK. Hedpeyf H Uwefx Ahvoi

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Hedjyfl U Nspfx Ahvsi

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Amada, _____ Hsdpfx Asyad A Ujhvji Description: Year of manuf. : 2022 Material: Round material:Ø 20 -101.6 mm Rectangular material:20 - 80 mm Cut length:10 - 6,000 mm Saw blade: Design:Disposable carbide saw blades Dimensions:Ø 360 x 2.0 mm Saw: Cutting speed:automatic control Revolutions:55- 180 Feed rate:0 -30 mm/sec Drive power:11 kW x 4P Horizontal clamping pressure:15.2 kN Vertical clamping pressure:3.9 kN Feed system: Drive system:AC servo + ball screw Feed length:715 mm Feed speed:30 m/min Bar loader: Max. diameter:100 mm Standard length:6,500 mm Magazine extension:By 2,000 mm Sorting section:With 2 switches Equipment: Material feed:Bar feeder Chip disposal:Chip conveyor Emulsion mist separator:Air Champion

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. Hedpsw Iq Ugofx Ahvoi - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: excellent (used), Year of construction: 1999, AMADA MODEL GPN 840 HYDRAULIC SHEAR MAXIMUM CUTTING LENGTH 4000 mm MAXIMUM THICKNESS M.S. 45 kg/mm/2 8 mm MAXIMUM THICKNESS S.S. 60/kg/mm2 6 mm STROKES PER. MIN 10 - 35 BACK GAUGE RANGE 10 - 1000 mm MOTOR SIZE 15 KW MACHINE WEIGHT 10100 kg STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 1.5 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORT SHADOW LINE LIGHT Hsdpfx Aotrkmnehvoi AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER AUTOMATIC SHEARING CONTACTS IN BACK GAUGE BLADE GAP AND RAKE ANGLE ADJUSTMENT FRONT FLIP STOPS ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE WORK CHUTE HOUR COUNTER AUTO-DIAGNOSTICS

Condition: ready for operation (used), Year of construction: 2012, operating hours: 15,279 h, controller manufacturer: AMADA, number of axes: 6, overall weight: 8,100 kg, total height: 1,988 mm, pressing force: 133 t, product length (max.): 4,755 mm, This 6-axis AMADA HD 1303 NT press brake was manufactured in 2012. It features a press capacity of 1300 kN, a bending length of 3110 mm, and a stroke of 250 mm. With a throat depth of 420 mm and speeds up to 200 mm/s, it's designed for efficient operation. Consider the opportunity to buy this AMADA HD 1303 NT press brake. Contact us for more information about this machine. • Distance between uprights: 2700 mm • Stroke: 250 mm Hjdpfex D Evpsx Ahvei • Open height: 590 mm • Throat depth: 420 mm • Speeds: • Approach: 200 mm/s • Working: 12 mm/s • Return: 120 mm/s • Hydraulic system: Oil tank capacity 48 liters • Ambient temperature range: 0–40 °C Technical Specification Bending Length 3110 mm

Condition: good (used), Year of construction: 2015, machine/vehicle number: C100298, Offer 26007 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity: - For steel sheet: 6.35 mm - For stainless steel: 4 mm Hedoyc Uuyepfx Ahvji - For aluminium: 8 mm - Adjustable cutting angle - Cutting length adjustment - Cutting line illumination - Number of hydraulic hold-downs: 14 pcs - Backgauge with AMADA positioning control: 10 – 1000 mm - Front squaring arm: 3000 mm - Support arms: 1500 mm - Rear area safety with light barrier - Electric foot switch - Strokes per minute: 12 – 26 - Drive: 400 V / 5.5 kW - Table height: approx. 860 mm - Floor space requirement incl. backgauge, without front support arms: approx. W 3800 x H 1950 x D 2300 mm - Weight: approx. 6500 kg

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 100t 3m, 4 axis Press Brake Year 2012 available end January 2026 Press Capacity (KN) 1000 Beam Length (mm) 3110 Distance Between Side Frames (mm) 2705 Throat Depth (mm) 420 Standard Stroke Length (mm) 200 Standard Open Height (mm) 470 Beam Width (mm) 60 Table Height (mm) 960 Approach Speed (mm/s) 1-100 Bending Speed (mm/s) 1-10 Return Speed (mm) 1-100 Number of Controlled Axis 4 Length (mm) 4580 Depth (mm) 2450 Height (mm) 2685 Weight (kg) 6900 Hedpfxsx Hdtho Ahvsi

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, input voltage: 400 V, empty load weight: 6,000 kg, coolant pump power: 180 W, saw band length: 7,600 mm, saw band width: 50 mm, AMADA HFA 700 CNC – Fully Automatic Heavy-Duty CNC Band Saw Industrial metal cutting | Serial production | AMADA Japan Hjdpfjyc H H Usx Ahvei The AMADA HFA 700 CNC is a fully automatic horizontal CNC band saw for metal cutting, designed for heavy-duty industrial applications and high-volume serial production. Its rigid 6000 kg construction and proven AMADA technology ensure stable, precise, and repeatable cutting results. Key advantages: ● fully automatic CNC band saw for metal ● AMADA – industrial-grade quality ● heavy-duty design, machine weight 6000 kg ● rigid frame minimizing vibration ● 7.5 kW saw motor ● hydraulic blade tensioning ● industrial blade size 7600 × 50 × 1.6 mm ● advanced CNC control – automatic cutting cycles ● ideal for serial production and continuous operation ● suitable for solids, profiles, and bundled materials Technical specifications ● Control system: CNC ● Saw motor power: 7.5 kW ● Hydraulic motor: 2.2 kW ● Coolant pump: 180 W ● Wire brush motor: 200 W ● Blade dimensions: 7600 × 50 × 1.6 mm ● Blade tensioning: hydraulic ● Power supply: 400 V / 50 Hz ● Connected load: 14 kVA ● Machine weight: approx. 6000 kg Condition: used, fully functional, ready for operation 📩 Contact us for price and further technical details.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: three-phase, overall weight: 2,200 kg, coolant pump power: 180 W, saw band length: 4,570 mm, saw band width: 41 mm, AMADA HFA 400 – Automatic Band Saw for Metal Cutting Serial production | AMADA reliability | Industrial use The AMADA HFA 400 is an automatic horizontal band saw for metal, designed for accurate, repeatable cutting in serial production environments. This model combines a compact footprint with a rigid structure and proven AMADA Machine Tools technology. With a solid machine weight of 2200 kg and fully automatic cutting cycles, the HFA 400 is ideal for manufacturing plants, service centers, and tool rooms. ● automatic band saw for metal ● trusted brand AMADA ● rigid construction – 2200 kg ● 5.5 kW saw motor ● industrial hydraulic system ● automatic cutting cycles ● high precision and repeatability ● suitable for solid materials and profiles Technical specifications ● Model: AMADA HFA 400 ● Type: automatic band saw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW ● Blade dimensions: -length: 4570 mm - width: 41 mm - thickness: 1.3 mm ● Power supply: 3-phase Hedpfx Ahjyc H Ewovsi ● Connected load: 11 kVA ● Machine weight: approx. 2200 kg ● Year of manufacture: 2012 Condition: used, fully functional, ready for operation 📩 Contact us for price and further details.

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Travel range (X x Y):1525 x 3050 mm Hedpfjx I T Dxox Ahvsi Control:AMNC-3i (21.5" screen size) Features :Punch & forming function :Good parts flap :scrap conveyor system Dimensions Length:5436 mm Width:6212 mm Height:2342 mm Weight:21500 kg

Condition: good (used), Year of construction: 2012, Amada LC 2012 C1 NT / Punch - Laser Machine, Year of manufacture: 2012, Control: AMNG - Fanuc Series, Punching force: 200 kN, Punching area: 2,500 x 1,270 mm, Laser power: 2,500 W, Laser cutting area: 2,000 x 1,270 mm, Z-axis travel: 100 mm, Max. table load: 150 kg, Hodoyay Tpjpfx Ahvoi Turret stations: 46 positions,

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, control type: CNC control, overall weight: 6,300 kg, year of last overhaul: 2025, degree of automation: automatic, AMADA HFA 530 CNC – Fully Automatic CNC Band Saw Overhauled in 2025 | Ready for immediate operation The AMADA HFA 530 CNC is a fully automatic CNC band saw designed for high-precision metal cutting, serial production, and heavy-duty industrial applications. Thanks to its rigid 6.3-ton construction and advanced CNC control, the machine delivers stable, accurate, and repeatable cutting results. Hodjyat Utepfx Ahvoi Key features & advantages: ● fully automatic CNC band saw for metal cutting ● overhauled in 2025 – machine ready for immediate use ● heavy-duty construction, machine weight 6.3 t, low center of gravity ● rigid frame design minimizing vibrations and improving cutting accuracy ● wide cutting capacity: - round material up to Ø 530 mm - rectangular material up to 530 × 530 mm ● hydraulic blade tensioning for constant cutting quality and extended blade life ● infinitely variable blade speed via frequency inverter (15–120 m/min) ● worktable load capacity 4000 kg – ideal for heavy workpieces ● minimum cutting length 10 mm, perfect for serial and batch production ● advanced CNC control system: ● easy and fast programming ● automatic cutting cycles ● high productivity and repeatability Technical specifications: ● Cutting capacity: - round: 30–530 mm - rectangular (W × H): 30 × 30 – 530 × 530 mm ● Worktable load capacity: 4000 kg ● Blade size: 67 × 1.6 × 6670 mm ● Blade speed: 15–120 m/min, inverter controlled ● Blade tensioning: hydraulic ● Power supply: 400 V ● Minimum cutting length: 10 mm ● Control system: CNC ● Connected load: 13 kW ● Machine weight: 6.3 t Condition & availability: - machine overhauled in 2025 - fully functional and tested - available immediately Contact us for price, inspection, or further technical details.