Used Alzmetall Gs 1400 for sale (143)

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Gedexd Tpwepfx Afiokc Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: used, bore capacity in steel (diameter) 40 mm throat 325 mm bore stroke 170 mm table surface area 730 x 590 mm Gedpfswn T A Uex Afiekc

Condition: used, machine/vehicle number: 8580, 3 automatic feeds 01, 02 -0.3mm/rev Table clamping surface: approx. 500 x 370 mm Table height adjustable via rack and pinion Machining base plate approx. 350 x 320 mm Gkodpfx Aowtdmujfiec With motor: 1.5 kW, 1415 rpm, 380/220V

Condition: good (used), Year of construction: 1954, Drill press, drill press, stand drill, pillar drill -Table size: 400 mm -spindle taper: MK4 -Projection: 320 mm -Speeds: 80-700 rpm -Columns: Ø 160 mm Godpfxedi Smke Afiekc -Spindle stroke: 175 mm -VIP transmission -Feed: 0.09-0.28 mm/rev -Tachometer: defective -Dimensions: 1100/500/H1960 mm -Weight: 650 kg

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Godovu Dv Hepfx Afijkc Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds - RPM counter for spindle speed - Table height adjustable by handwheel - Machine lamp - Emergency stop via foot switch and kick switch - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Gsdei Tvv Aepfx Afiskc Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Drilling capacity steel E335 (St 60) 40 mm Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Machine height without options approx. 1840 mm Gkjdexd Tpqopfx Afisc Net weight approx. 270 kg Spindle speed rpm 160-2250

Condition: used, Year of construction: 1987, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm taper MK 5 MK table-size 660 mm feeds 0,1-0,14-0,2-0,28-0,4 . mm/U turning speeds 40 - 800 U/min total power requirement 4,0 KW weight of the machine ca. 1,4 t dimensions 1,2 x 0,8 x 2,59 m Gkodow Tdx Nopfx Afisc Pillar drill with: - Feed - Left/right rotation - Variable spindle speed - Coolant pump

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm Gjdpfxjwncaie Afiekc - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Condition: good (used), functionality: fully functional, Data: Tool holder MK 5--- Drilling capacity with ST60 50 mm--- Infinitely variable speed ranges approx. 40 - 180 rpm + 180 - 800 rpm--- 5 feeds 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev--- Table surface, 880 x 670 mm--- throat depth: 385 mm--- Gsdpsxa Egtefx Afijkc

Condition: good (used), - MK4 Gkodoxc N T Aepfx Afioc - Automatic feed - Variomatic - Rotates clockwise and counterclockwise - Cooling - Machine vise - Lighting - 380V

Condition: used, Year of construction: 2000, Technical details: bore capacity in steel (diameter): 18 mm throat: 250 mm bore stroke: 100 mm bore capacity in cast iron: Ø 23 mm Distance spindle/table max.: 75 / 400 mm range of revolution per miute: 225 - 4.300 / 2x 8 step U/min spindle taper MT: MK 2 feed:: von Hand mm/U table surface area: 250 x 250 mm vertical adjustment: 325 mm table clamping surface LxW: 250 x 250 mm table rotating: 360 ° base plate surface area: 320 x 250 mm distance spindle center to floor plate:: 565 mm column diameter: 90 mm total power requirement: 0,55 kW machine weight ab.: 160 kg dimensions L x W x H: 0,9 x 0,6 x 1,1 m High-performance drilling machine Thread cutting in steel possible up to M 10 and cast iron up to M 14 equipped with Röhm 3 -16 mm quick-action chuck Gkodpeu R Uncefx Afijc Operation via control panel / foot switch *

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Gjdpfx Aoxd Tlxsfiekc Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300

Condition: new, Drilling capacity in St 60 40 mm threading in St 60 M 24 mm Gjdpsgp Dyxofx Afiekc threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM total power requirement 1,45 / 1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting

Condition: good (used), Year of construction: 2005, machine/vehicle number: 34704, Offer 25236 Technical specifications: - Drilling capacity in steel ST 60: 34 mm - Maximum drilling capacity in steel ST 60: 40 mm - Drill spindle taper: MT 4 - Drill spindle travel: 160 mm - Throat depth: 330 mm - Table with 2 T-slots: 610 x 430 mm - Max. distance table – drill spindle approx.: 665 mm - 4 feed rates: 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Infinitely variable spindle speeds: 70 - 1800 rpm - Work light - RÖHM machine vice - Various HSS drills, countersinks, reducing sleeves - Thread cutting device Gksdswyb Rdjpfx Afioc - Drive: 400 V / 0.6 / 1.8 kW - Space requirement approx.: W 1000 x H 2050 x D 1150 mm - Weight approx.: 470 kg

Year of construction: 1978, condition: ready for operation (used), Drilling spindle stroke: 160mm, spindle taper: MK4, spindle speed: 1750rpm, reach: 300mm, feed: 0.3mm/rev, table dimensions X/Y: 620mm/470mm, machine dimensions X/Y/Z: approx. 620mm/950mm/1900mm, weight: approx. 450kg. Includes coolant system and threading device. An on-site inspection is possible. Gsdpfxexc Ni Do Afiokc

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 200 mm table surface area 720 x 5 mm Gjdpsv Ehftsfx Afiskc

Condition: good (used), Year of construction: 1985, machine/vehicle number: 4888, Offer 25234 Technical Data: Godpfx Ajwylvqefiokc - Drilling capacity in steel ST 60: 32 mm - Maximum drilling diameter in steel ST 60: 40 mm - Long spindle MK 3 - Drill spindle speeds steplessly adjustable - Range 1: 160 – 1125 rpm - Range 2: 320 – 2250 rpm - Drill spindle stroke: 120 mm - Feeds: 0.1 + 0.2 mm/rev - Throat depth: 293 mm - Column diameter: 115 mm - Table size: 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vice - 10 pcs. HSS drill bits 10 – 25 mm - Required space approx.: W 500 x H 1750 x D 900 mm - Weight approx.: 270 kg

Condition: good (used), Year of construction: 1965, machine/vehicle number: 1318, Offer 24479 Technical data: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 65 mm - Drill spindle mount MK 5 - Drill spindle stroke 240 mm - Throat depth 385 mm - Table with 2 T-slots 610 mm - Max. distance table - drill spindle approx. 820 mm - Max. distance base plate - drill spindle 1325 mm - Column diameter 220 mm - Feed rates 0.10 - 0.14 - 0.20 - 0.28 - 0.40 mm/rev - Drill spindle speeds continuously adjustable 85 - 1620 rpm - Drive 380 V / 4 kW - Lighting - Electric foot switch - Space requirement approx. W 750 x H 2350 x D 1500 mm Godpfx Ajv Avf Njfiekc - Weight approx. 1350 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: Unbekannt, QUOTE Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle mounting MK 3-long spindle Gjdpfx Aohglvkjfiokc - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0,1 ; 0,2 ; 0,3 mm/rev - throat 290 mm - max distance table - drilling spindle 620 mm - rotary table with 2 T-slots 450 mm - Height adjustable via toothed rack with hand crank - Coolant device - Drive 380 V / 0,9 / 1,3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Godpfx Ajkt Nqqsfiskc Technical data: - Drilling capacity in steel ST 60 35 mm - drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - drilling spindle stroke 170 mm - throat 345 mm - rotary table with 2 T-slots 550 mm - max. distance table - drilling spindle 650 mm - max. distance base plate - drilling spindle 1000 mm - feeds 0,09 - 0,16 - 0,28 mm/rev. - AZ gearbox stepless with gearbox - drilling spindle speeds infinitely variable 40 - 720 rpm - right. - counterclockwise rotation - drive 400 V / 2,5 kW - illumination - coolant equipment - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

Condition: good (used), Year of construction: 1998, Offer 25232 Technical Specifications: - Drilling capacity in steel ST 60: 32 mm - Drilling performance in steel ST 60: 46 mm - Thread cutting unit up to: M 30 - Drill spindle taper: MT 4 - Drill spindle stroke: 160 mm - Throat depth: 300 mm - Table with 2 T-slots: 615 x 430 mm - Column diameter: 145 mm - Power feeds – electromagnetic: 0.1 - 0.2 - 0.3 - 0.4 mm/rev Gsdpfx Aowyupyefiekc - Infinitely variable spindle speeds with digital display: 80 – 4000 rpm - Drive: 400 V / 1.4 / 2.2 kW - Electric foot switch - Lighting - Machine vice - Required space approx.: W 650 x H 2100 x D 1100 mm - Weight approx.: 450 kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: 1956, Offer 25296 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Max. drilling diameter in steel ST 60: 55 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 180 mm - Throat depth: 350 mm - Height-adjustable table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle: 550 mm - Max. distance machined base plate – drill spindle: 1140 mm - Column diameter: 200 mm - Feeds, electromagnetically controlled: 0.15, 0.2, 0.3, 0.36 mm/rev - With overload protection - Steplessly adjustable drill spindle speeds: - 60 – 210 + 210 – 765 rpm - 120 – 420 + 420 – 1530 rpm - Drive: 400 V / 2.3 / 3.4 kW - Electric footswitch Gksdow S H Tajpfx Afijc - Coolant system - Work light - Machine vice - Quick-release drill chuck - Required space approx.: W 750 x H 2050 x D 1050 mm - Weight approx.: 650 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm Godpfx Afjwd Ii Ujiskc - Weight approx. 500 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 Godpfx Ajt Etiyofijkc - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable with reduction gear - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - max. distance table - drilling spindle approx. 780 mm - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg