Used Alzmetall Ab 4 for sale (140)

Condition: used, Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S Iedpfxor Ngp Uo Afiebc -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm -Projection: 380 mm -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg

Condition: used, Technical details: bore capacity in steel (diameter): 28 mm throat: 345 mm bore stroke: 190 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 4 spindle speed:: 50 - 1280 / 4 steples U/min feed: 0,1; 0,2, 0,3 manuell/automastic mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 450 x 600 mm table rotating: 360 ° table adjustment: vertical 600 mm column diameter: Ø 160 mm weight of the machine ca.: 273 kg dimension machine xH: 1,0 x 0,71 x 2,0 m Iedpfsu Idk Ujx Afiobc Thread cutting with right and left rotation via foot switch Table adjustment via hand crank Without coolant tank Machine vice Quick-action clamping chuck Röhm Supra 3 - 16mm i.D. *

Condition: excellent (used), Year of construction: 1975, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Iedpfx Afewg Hd Nsisbc Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1975 With coolant system!

Condition: good (used), Column drilling machine Make ALZMETALL Type:AB 4 SJ ( year 1970 ) with coolant device, infinitely variable speed, with 2 gears. Drill hole in steel max: 40 mm Spindle mounting :MK 4 spindle speed : 80 -720 rpm Spindle stroke max : 150 mm Iedpolq D Akefx Afiebc feeds : 0.09 / 0,16 /0,28 mm/rev Table diameter : 560 mm Machine ready for use .

Condition: used, Year of construction: 1979, Drilling capacity: 35 mm Mounting type: MK 4 Feed rate: 0.04, 0.07, 0.10 ,0.14, 0.26, 0.40 Speeds: 63, 125, 180, 250, 355, 500, 710, 1400 Digital display in Z: 720 mm Iedpfx Afebn R Aljijbc Cross table:x= 460 y= 280 mm drilling capacity in GG 20: 45 mm with cam control Cross table

Condition: used, Year of construction: 1989, Technical details: Ibjdpfx Afju Idkzeisc bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Year of construction: 1970, condition: ready for operation (used), Box column drilling machine Make ALZMETALL Type:AB4 HST Year 1970 with coolant device . drilling capacity in steel max : 40 mm spindle mounting : MK4 Iodpfxjmp Tp Ho Afisbc spindle speed : 80-710 rpm feeds : 0.09 - 0.16 -0.28 mm/rev table size : 600X460 mm Machine is ready for use .

Condition: new, ALZMETALL Alztronic 16 table drilling machine Condition: new Availability: Immediately from the Offenburg warehouse Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thrust 190 mm Column diameter 65 mm Manual feed Drill head height adjustment via handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Ibjdoxd Tugepfx Afiec Spindle speed rpm 100-2000 Optional special equipment: - Digital drilling depth indicator - Machine light Optional accessories: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table

Condition: new, Year of construction: 2023, Alzmetall Alztronic i16 table drilling machine 5" touch display Condition: new Call us and ask us about special discounts or send us your request by email with your contact information and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and uniform operator guidance using pictograms - Manual input of spindle speed - target value - Speed display - actual value - Integrated drilling depth display with touch zero point transfer (drilling start) - Virtual drilling depth scale in the display Iodpfx Afjxd Tqbsijbc - Machine status displays and warnings in the display (safety)• Main switch, lockable - Right and left rotation through contactor control - Control voltage 24 V - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Spindle braking function - ALZTRONIC only (safety) - Adjustable display timeout Standard Equipment: -AC motor 230 V, 50 Hz -Infinitely variable speed adjustment -Reversing switch for right-left rotation -Spindle protection with electrical protection -On/off button with lockable emergency stop flap -Connection plug, cable length 3m -Paint: structural paint light gray RAL 7035, anthracite RAL 7016, white aluminum RAL 9006 Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thread 190 mm Column diameter 65 mm Manual feed Drill head height adjustment by handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: good (used), Year of construction: 1998, CNC MACHINING CENTER ALZMETALL BAZ 15, Year of manufacture: 1998 Technical specifications: X: 600 mm Iodpfx Afjv Rnyzeisbc Y: 400 mm Z: 600 mm Table: 750 x 450 mm Main spindle: 10,000 RPM Control: Siemens Sinumerik

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, For sale is a drilling and milling machine from Alzmetall type Plus 3 DG The machine has been completely dismantled and overhauled. Iedpexn T S Hjfx Afiobc Inspection and test run possible at any time. Forklift available for loading

Condition: excellent (used), X-axis 1200mm Y-axis 600mm Z-axis 850mm 24-station tool changer Year of manufacture 2000 Speed 9000 Ibedpfswmaadsx Afisc Internal cooling 32 bar

Condition: excellent (used), Year of construction: 1999, Drilling capacity (steel): 18mm Drilling capacity (cast): 23mm Ibedpokytxzjfx Afisc Thread cutting (steel): M14mm Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Column diameter: 90mm Power: 0.55 kW Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Condition: ready for operation (used), Year of construction: 1989, Drilling capacity: 30 mm Spindle taper: MK 3 Table size: 300 x 300 mm Throat depth: 290 mm Drilling stroke: 120 mm Ijdpfx Aexlgxhsfiobc Maximum distance between table and quill: 660 mm Infinitely variable spindle speeds: 160 – approx. 1000 rpm Drive motor: 1/1.3 kW Required space: 900 x 550 x 1750 mm

Condition: ready for operation (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1441, spindle speed (max.): 3,000 rpm, spindle speed (min.): 200 rpm, total height: 1,500 mm, total width: 560 mm, total length: 800 mm, table width: 240 mm, table length: 250 mm, overall weight: 250 kg, With 2 grooves, including frequency converter for stepless speed use. Ibedpfx Afsv Iqqdsisc

Year of construction: 1990, condition: good (used), Technical data - Clamping surface (left-right): 370 mm - Clamping surface (front-rear): 614 mm - Control: electronic control - quill stroke: 180 mm - Speed range up to: 55 - 5000 rpm - throat: 320 mm - Tool holder: MK 4 - Connection voltage: 400 V - Total height approx.: 2.06 m - Documentation - Weight approx.: 600 kg Iedpshnc E Uofx Afiebc

Condition: used, Year of construction: 2007, Technical details: x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm distance spindle /table: 125 / 925 mm control: Heidenhain iTNC 530 number of spindle speeds: 9000 steples U/min. max. torque on the spindle: max.82 Nm switched on hours: 43363 h spindle hours: 16319 h tool changer with: 24 Plätze table-size: 1250 x 630 (Kreuzschiebetisch) mm max. table load: 1000 kg spindle taper MT: SK40 spindle drive: 13 kW feed range: X/Y/Z: 40/40/30 m/min rapid traverse:: X/Y/Z: 40/40/30 m/min feed power: X/Y/Z: 7/7/16 kN interface: ja total power requirement: 13 kW Weight approx.: 8,0 t dimension coolant device: ca. L:1,25 x B: 0,7 x H: 1,56 m dimension machine xH: 2,4 x 3,0 x 3,3 m Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: Compact filter/coolant high-pressure system Knoll Chip conveyor/scraper belt conveyor 300mm Iodpfx Afsvithzoijbc Tool changing unit with disk magazine for 24 tools Electronic handwheel Operation via Heidenhain control panel Accessories: AL plate 1200x600x45mm with holes Ø 15mm *

Condition: new, ALZMETALL column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW Drilling capacity steel E335 (St 60) 23 mm Thread cutting Steel E335 (St 60) M 14 Cast EN-GJL-200 (GG20) M 16 Short spindle MK 2 Spindle stroke 100 mm Thrust 250 mm Column diameter 90 mm Machine table, usable support 370 x 300 mm T-slots, number x width x distance 2 x 14 x 160 mm Distance spindle-table min./max. 140/670 mm Hand feed Machine height without options approx. 1770 mm Net weight approx. 175 kg Drive stepless Motor 750 / 1500 rpm Power 0.6 / 0.95 kW Spindle speed rpm 225-4300 Standard equipment: Mushroom push button (latching) for EMERGENCY STOP Reversing switch for clockwise and counterclockwise rotation Motor protection switch Ibjdpfjxd Tt Aex Afioc Stepless speed adjustment Digital speed display Protection class IP 54 Connection plug (fully assembled, cable length 2m) Spindle protection with electrical fuse Paint: DD structural paint light gray RAL 7035, anthracite RAL 7016

Condition: new, Drilling capacity in St 60 40 mm threading in St 60 M 24 mm threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM total power requirement 1,45 / 1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Iedpfxjgp Dyxo Afijbc Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting

Condition: good (used), Year of construction: 1985, machine/vehicle number: 4888, Offer 25234 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Maximum drilling diameter in steel ST 60: 40 mm - Long spindle MK 3 - Drill spindle speeds steplessly adjustable - Range 1: 160 – 1125 rpm - Range 2: 320 – 2250 rpm - Drill spindle stroke: 120 mm - Feeds: 0.1 + 0.2 mm/rev - Throat depth: 293 mm - Column diameter: 115 mm Iodpfx Afjwylvqsiobc - Table size: 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vice - 10 pcs. HSS drill bits 10 – 25 mm - Required space approx.: W 500 x H 1750 x D 900 mm - Weight approx.: 270 kg

Year of construction: 1991, condition: good (used), Technical data - Clamping surface (left-right): 390 mm - Clamping surface (front-rear): 420 mm - Control: electronic control - quill stroke: 120 mm - Speed range up to: 7500 rpm - Tool holder: MK 3 - Connection voltage: 400 V Ibsdpfx Ashnc D Tofiec - Mains frequency: 50 Hz - Total height approx.: 1.90 m - Documentation - Weight approx.: 400 kg

Condition: used, Year of construction: 2000, Technical details: bore capacity in steel (diameter): 18 mm throat: 250 mm bore stroke: 100 mm bore capacity in cast iron: Ø 23 mm Distance spindle/table max.: 75 / 400 mm range of revolution per miute: 225 - 4.300 / 2x 8 step U/min spindle taper MT: MK 2 feed:: von Hand mm/U table surface area: 250 x 250 mm vertical adjustment: 325 mm table clamping surface LxW: 250 x 250 mm table rotating: 360 ° base plate surface area: 320 x 250 mm distance spindle center to floor plate:: 565 mm column diameter: 90 mm total power requirement: 0,55 kW machine weight ab.: 160 kg dimensions L x W x H: 0,9 x 0,6 x 1,1 m High-performance drilling machine Thread cutting in steel possible up to M 10 and cast iron up to M 14 Iodsu R Uncepfx Afiebc equipped with Röhm 3 -16 mm quick-action chuck Operation via control panel / foot switch *

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Isdpsxd Trlofx Afisbc Not the right machine? Then please contact us.

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Drilling capacity steel E335 (St 60) 40 mm Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Ibedpfxoxd Tpqj Afijc Machine height without options approx. 1840 mm Net weight approx. 270 kg Spindle speed rpm 160-2250

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Iedpfjxd Tlxsx Afiobc Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300