Used Alzmetall Ab 35 S for sale (135)

Year of construction: 1987, condition: used, 1 pillar drilling machine ALZMETALL AX 3SV, serial no. 5739, year of manufacture 1987 Bjdpoi Apu Tefx Ahvjcw

Condition: new, ALZMETALL Alztronic 16 table drilling machine Condition: new Availability: Immediately from the Offenburg warehouse Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thrust 190 mm Column diameter 65 mm Manual feed Drill head height adjustment via handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Bcsdpjxd Tugsfx Ahvow Optional special equipment: - Digital drilling depth indicator - Machine light Optional accessories: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm Bcedpfjxd Ttpsx Ahvjw

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever Bedpfx Aexd Trlehvscw - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: new, Year of construction: 2023, Alzmetall Alztronic i16 table drilling machine 5" touch display Condition: new Call us and ask us about special discounts or send us your request by email with your contact information and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and uniform operator guidance using pictograms - Manual input of spindle speed - target value - Speed display - actual value - Integrated drilling depth display with touch zero point transfer (drilling start) - Virtual drilling depth scale in the display - Machine status displays and warnings in the display (safety)• Main switch, lockable - Right and left rotation through contactor control - Control voltage 24 V - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Spindle braking function - ALZTRONIC only (safety) - Adjustable display timeout Standard Equipment: -AC motor 230 V, 50 Hz Bcjdpfx Ahoxd Tqbevow -Infinitely variable speed adjustment -Reversing switch for right-left rotation -Spindle protection with electrical protection -On/off button with lockable emergency stop flap -Connection plug, cable length 3m -Paint: structural paint light gray RAL 7035, anthracite RAL 7016, white aluminum RAL 9006 Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thread 190 mm Column diameter 65 mm Manual feed Drill head height adjustment by handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: as good as new (ex-display), Column drilling machine Make: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed 100 - 1.800 rpm. equipped as standard with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Touch zero point transfer, Virtual drilling depth scale in the display, Machine status displays and warnings in display, service information, Selectable operator language: DE/EN/FR/ES/IT/NL/RU. - Thread cutting device - Speed adjustment, stepless, by means of lever - Speed display, digital - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Clockwise and counterclockwise rotation via contactor control - spindle protection - Operating instructions other important technical data: Bsdoiypz Eopfx Ahvscw - 30 mm drilling capacity in ST 60 - 140 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - 1,0 / 1,6 kW motor power - 515 x 360 mm Table dimension with the following options: - LED machine light - automatic spindle stop - technology calculator in display - workpiece counter

Condition: new, Column drilling machine Make: ALZMETALL Model: AX 3/SV Bcodpfx Aeb Archohvjw Condition: New machine Speed 80 - 1.125 RPM serially equipped with: - Speed adjustment, infinitely variable - Speed display, digital - feed overload protection - spindle protection - Instruction manual further important technical data: - 40 mm drilling capacity in ST 60 - 120 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - feed rate 0,1 + 0,2 mm/rev - 1,0 / 1,6 kW motor power - 515 x 360 mm Table dimension

Condition: good (used), Year of construction: 1987, machine/vehicle number: 5742, functionality: fully functional, - Drilling capacity in St 60, 30 mm Bcsdjq U Swgspfx Ahvow - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Bedsd Hy Eljpfx Ahvocw Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: good (used), Year of construction: 1985, machine/vehicle number: 4888, Offer 25234 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Maximum drilling diameter in steel ST 60: 40 mm - Long spindle MK 3 - Drill spindle speeds steplessly adjustable - Range 1: 160 – 1125 rpm - Range 2: 320 – 2250 rpm - Drill spindle stroke: 120 mm - Feeds: 0.1 + 0.2 mm/rev - Throat depth: 293 mm - Column diameter: 115 mm - Table size: 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button Bodpfowylvqjx Ahvscw - Machine vice - 10 pcs. HSS drill bits 10 – 25 mm - Required space approx.: W 500 x H 1750 x D 900 mm - Weight approx.: 270 kg

Condition: used, Year of construction: 1995, Alzmetall AC25 / AS. Year of manufacture: 1995. Bedpfx Ahswwmkqsvocw

Condition: new, Year of construction: 2023, machine/vehicle number: PRJ065958, ALZMETALL bench drilling machine drilling capacity in steel 16mm Short spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-table min./max. 75/357mm, machine table height adjustment via hand crank, machine table base plate, usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min. / max. 437/437mm, feed by hand, machine height without options: 825mm, net weight: 83 kg. - Speed infinitely variable 100-2000 rpm Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in the display, machine status indicators and warnings in the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint: DD structure paint signal white RAL 9003, PANTONE 7545c, black Bcsdpfxolubw Io Ahvew incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: not inspected (used), Year of construction: 1989, machine/vehicle number: 1441, functionality: unexamined, rotational speed (max.): 3,000 rpm, total length: 800 mm, table width: 240 mm, table length: 250 mm, overall weight: 250 kg, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item within the set deadlines: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Spindle speeds: 200 – 3,000 rpm Table dimensions: 250 x 240 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 560 x 1,500 mm Weight: 250 kg Bjdpfx Asym N Rwohvocw EQUIPMENT With 2 T-slots Frequency inverter for stepless speed control External reference: Rühl

Condition: good (used), Year of construction: 2001, X-axis 800 mm Y-axis 600 mm Z-axis 800 mm Table clamping surface 850 x 630 mm Max. table load 1,000 kg Max. spindle speed 9,000 rpm Tool holder SK40 Tool changer 15 positions Control HEIDENHAIN Bjdpfx Aeylxgfjhvjcw Weight 8,000 kg Incl. chip conveyor Incl. retrofitted 4th axis Incl. documentation Machine is available immediately. The vices shown in the pictures are not included in the scope of delivery.

Condition: new, Year of construction: 2026, machine/vehicle number: PRJ069841, ALZMETALL Bench Drill Machine Drilling capacity in steel 14mm Short taper spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-table distance min. / max. 75/357mm, machine table height adjustment by hand crank, machine base plate, usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-base plate distance min. / max. 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Stepless speed adjustment 230–4000 rpm Standard equipment: 5" TFT LCD display with touch function: manual input for target spindle speed, actual speed indicator, integrated drilling depth display with touch zero reset, virtual drilling depth scale on display, machine status and warning messages on display, service information, selectable operating languages DE/EN/FR/ES/IT/NL/RU Single-phase motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m, three separate pushbuttons for forward - reverse - stop, spindle lock with brake function, spindle guard with electrical interlock, lockable main switch, mushroom-head emergency-stop button (latching), stepless speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD-structured paint signal white RAL 9003, PANTONE 7545c, black Bjdpfslub Htox Ahvscw Delivery time: ex stock Waiblingen Beinstein

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 80 - 1125 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B. Bsdjxabyijpfx Ahvecw

Condition: new, bore capacity in steel (diameter) 55.0 mm throat 300 mm bore stroke 140 mm morse taper 4 MK table: 615 x 430 mm turning speeds 70 - 1200 U/min column diameter 145 mm thread M 30 ST60 thread M 36 GG20 feed 0.10 + 0.30 mm/U distance spindle /table 150 / 735 mm engine output 1.8 / 2.9 kW weight 380 kg Machine height 1850 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: Bcedpfxexabn Te Ahvow - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: excellent (used), Year of construction: 1999, CNC MACHINING CENTER ALZMETALL BAZ 15 Year of construction : 1999 Bcjdsu Spdbjpfx Ahvjw Top condition Technical data : X : 600mm Y : 400mm Z : 600mm Table : 750 x 450mm Main spindle : 10,000RPM Control : HEIDENHAIN TNC 426 24 magazine places

Condition: good (used), 37 Machine Tools • Years of manufacture 1970–2000 • Well-maintained condition For sale is an extensive selection of machines from a locksmith’s workshop or metalworking company, specializing in special-purpose machine construction. The total lot includes over 40 predominantly conventional machine tools, solid industrial quality, all well maintained and in full working order. Many machines have been repainted in red/blue for company identification, but are technically in good original condition. The package includes, among others: CNC Vertical Machining Center Alzmetall BAZ 15 CNC Universal Milling Machine Wemas WM3 Universal Milling Machine Deckel FP3A Guillotine Shear BRZESKA FABRYKA 2000/3 Mini Excavator / Multi-purpose device “BOBCAT” FAI 336 Two Band Saws Mössner Rekord (large and small) Cold Circular Saw Kaltenbach Mitre Saw with Table K180 Surface Grinders ABA and ST 30/50 Cylindrical Grinder MSO EDM Machine AEG-Elotherm Elbomat 400 Eccentric Press Helmerding TP8 Hydraulic Press FMA Pokorny 60080-01-5 Spindle Press 10 t Grinder Knuth Belt & Disk Sander 102800 Sandblasting Unit Tremor S.A. Vevey Column Jib Crane 500 kg Four Welding Machines TransMIG 400 Pillar Drill Siegfried Franzen Jungheinrich Pallet Stackers (electric high-lift truck) And numerous other machines, workshop equipment, and accessories. Condition: Consistently well-maintained workshop equipment, all machines functionally tested Some machines repainted in company colors (red/blue) Sturdy machines of high-quality German and European manufacture Terms & Logistics Purchase of individual items possible; removal to be handled by the buyer Ideally sold as a complete lot, available immediately, For full lot purchase, we can arrange transport and loading logistics. Viewing by appointment possible Interested? A complete machine list, technical data, photos, and pricing available on request. If you have questions or would like to arrange a viewing, please contact us. Bedpfx Aexx Tl Ishvocw

Condition: used, Year of construction: 1999, serial number 1296 ja changer ja fach documentation ja Bcsdpfxexzu Ate Ahvew control Heidenhain 426 weight of the machine ca. 6 t

Year of construction: 2023, condition: new, machine/vehicle number: PRJ065955, ALZMETALL bench drill drilling capacity in steel 12mm Drill chuck mounting B16 outer taper, spindle stroke: 40mm, throat: 200mm, column diameter: 50mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min./max. 110/250, feed by hand, machine height without options: 670mm, net weight: 64 kg. - Speed infinitely variable 250-5000 rpm Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in display, machine status indicators and warnings in display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, Bedpolub Rdjfx Ahvecw spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint finish: DD structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: as good as new (ex-display), Year of construction: 2016, machine/vehicle number: PRJ053143, functionality: fully functional, spindle mount: MK 2, throat depth: 190 mm, drilling capacity: 14 mm, column diameter: 65 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 230 rpm, stroke length: 80 mm, Equipment: rotational speed infinitely variable, Exhibition machine, year of manufacture 2016 – without drill chuck. -With minor signs of use. The machine was only used for demonstration purposes in our showroom; the original warranty card and operating manual are included with the machine. Collection preferred – shipment within Germany available upon request Standard features: - Digital speed display (LED) - Stepless speed adjustment - Reversing switch for clockwise/anticlockwise rotation - Spindle guard with electrical interlock - On/off switch with lockable emergency stop flap - Connection plug pre-installed, cable length 3m - Paint finish: DD textured paint light grey RAL 7035, anthracite RAL 7016, black ----- Bedpfx Ahoycuf Ejvocw Technical data: Drilling capacity in steel E335 (St 60): 14mm Thread cutting in steel E335 (St 60): M10 Tool holder short spindle: MT2 Throat depth: 190mm Spindle stroke: 80mm Column diameter: 65mm Feed: Manual Machine table height adjustment: with hand crank Drive: Infinitely variable Drive motor: 0.54kW Spindle speeds: 230–4,000 rpm Operating voltage: 230V/50Hz

Condition: used, total width: 800 mm, total length: 900 mm, total height: 1,900 mm, Empty weight: 500 kg - Documentation available: Yes - CE certificate present: No - Serial number: 120281 - Control: Conventional - Motor power: 1.5kW - Drilling depth: 160mm - Spindle speed max.: 1400rpm - Tool holder: MK3 - Table width: 460mm - Table length: 620mm - Spindle diameter: 20mm - Travel Z: 500mm - Number of axes: 1 - Spindle speed min.: 80rpm - Transport dimensions: 900mm x 800mm x 1900mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bodpfx Ahjxz Egvsvscw Lukas van Rossum

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display Bcsdpfx Asxab Nwjhvsw * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Condition: used, Year of construction: 1986, Technical details: bore capacity in steel (diameter): 18 mm throat: 250 mm bore stroke: 100 mm drill capacity in cast iron: Ø 23 mm metrical thread cutting: ST60: M10 / GG20: M 14 M spindle taper MT: MK 2 spindle speed:: 400 - 630 - 1000 - 1600 - 2500 U/min feed: manuell mm/U Distance spindle/table max.: 75 / 605 mm table clamping surface:: 250 x 250 mm column diameter: Ø 90 mm total power requirement: 0,55 kW weight of the machine ca.: ca. 170 kg Bcjdpfxowiwwfs Ahvow dimension machine xH: 0,4 x 0,8 x 1,8 m