Used Aluminium Milling Machine for sale (93,786)

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 1,000 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 125 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, CNC milling machine on torsion-resistant, plastic-coated aluminum frame: - Manufacturer: Haase Fgedou Rmftepfx Afish - Type: AL 1065expert - Travels (X, Y, Z) : 1000 x 650 x 125 mm - Positioning speed 24,000 mm / min - Roller guide on X- and Y-axis, prism guide on Z-axis - Recirculating ball screws on all axes - Servo stepper with closed control loop - T-slot table incl. 4 clamping claws - High-quality control panel - Including cncGraF control software with SMC5D - USB2.0 controller - Year of manufacture 2016 Including: ELTE milling spindle 18.000rpm - 1,0kW Power : 1000 Watt Speed : 1.000 - 18.000 1/min Voltage : 230 V Weight : approx. 4.1 kg Collet chuck : ER 20 incl. 1 collet each 4.0 mm and 6.0 mm - incl. 1 KW frequency converter with setpoint control via potentiometer - Full-shaft control electronics for constant power and speed - Soft start and starting current limitation - ER20 clamping nut and clamping connections

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Fedpfx Aoqttt Tjfisgh

Year of construction: 1988, condition: good (used), Tool milling machine make: INFRATIREA, type: FUS-32, year 1988 Technical data: table 950 x 450 mm travels X / Y / Z: 500 / 320 / 400 mm spindle speeds 25 - 2000 rpm with digital display Fjdjhaq T Tspfx Afiegh

Condition: used, Motor 6 / 7.5 kW Location: Supplier Fgodew Enw Iopfx Afijh

Condition: excellent (used), functionality: fully functional, Make: WMW (Germany) Model: GFL 1000 Center Height: 210 mm Max. Workpiece Length: 1000 mm Max. Workpiece Diameter: 200 mm Max. Swing Diameter over Bed: 410 mm Availability: In Stock WMW (Germany) Worm & Thread Milling Machine in excellent working condition. Model: GFL 1000. Max. workpiece diameter: 200 mm. Max. workpiece length: 1000 mm. Capable of worm milling, thread milling, spline milling, as well as spline and gear hobbing operations. Technical specifications: Fgodpfxoxlagre Afijh - Manufacturer: WMW (Germany) - Model: GFL 1000 - Centre height: 210 mm - Max. workpiece length: 1000 mm - Max. workpiece diameter: 200 mm - Max. swing diameter over bed: 410 mm - Cutter speeds: 28 rpm to 250 rpm - Max. cutter diameter: 125 mm - Spindle bore: 75 mm - Cutter head swiveling range: +112° to -62° Additional equipment: - Includes approximately 136 spare cutters - Equipped with steady rest, job support, change gears, and additional accessories The machine is in excellent working condition.

Condition: used, Year of construction: 2017, x-travel 500 mm y-travel 450 mm z-travel 400 mm Fedpewm Rthofx Afiegh Control DMG MORI

Condition: reconditioned (used), Technical data Travel paths • X-axis: 1,000 mm • Y-axis: 600 mm • Z-axis: 625 mm Control • CNC control: Heidenhain TNC 155 Rigid angle table • Clamping surface 1000 x 630 mm • Conversion to rotary table possible Automatic swivel head • Milling spindle holder: SK 40 Conversion to SK 50 possible • Quill 120 mm • Speed: 2,500 rpm Fodpfx Afemv Ev Dsisgh _____ Used machine – used milling machine – used universal milling machine – swivel head – metalworking – tool milling machine – milling head – SHW machine – console milling machine – rotary table – NC rotary table – SK50 – SHW spare parts – used milling machine – used milling machine – used CNC milling machine – used drilling milling machine – used metal milling machine – used metal milling machine – metal milling machine used – used cnc milling machine – cnc milling machines – cnc milling machines – milling machine – milling – shw – uf21 – uf 21 – SHW UF – Heidenhain – MBM milling machine – MBM machine

Condition: good (used), Year of construction: 1989, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Fedpfetp Nyfjx Afiegh

Year of construction: 1995, condition: good (used), travels: x=1600mm Y=800mm Z=900mm spindle speed max. 2000 revolutions per minute Fgjdpfx Ash Nuhrsfish Control HH 407 A Cover of z axis present but defective.

Condition: used, Year of construction: 1993, operating hours: 23,927 h, functionality: fully functional, machine/vehicle number: 85280, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 350 mm, overall weight: 23,000 kg, spindle mount: MK 4, Control: Siemens Sinumerik with magnetic clamping table, dimensions 4,000x1,500 mm, due to insolvency. Can be inspected under power. Fgodpfexk U T Rjx Afieh

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Measuring probe / Coolant system / Chip conveyor Fsdpexk Uy Dsfx Afisgh Enclosure / Cabin / Control cabinet: 1260 x 500 x 1700 mm Travel paths: 700 x 550 x 550 mm / Clamping table area: 1000 x 490 mm

Condition: ready for operation (used), Perimeter tenoning machine BALESTRINI model TO 2 working fields, round/longitudinal tenons – independent processing, adjustment of tenon thickness and width, Fjdowxrmtepfx Afiogh adjustable table angle setting.

Condition: ready for operation (used), Year of construction: 2004, Make: MAZAK Type of machine: INTEGREX E-410H Year of manufacture: 2004 Fodpsxk Uvrsfx Afijgh Control system: Mazatrol 640M Pro CNC-Steuerung Machine's weight: 17000 kg Tool holder: KM 63 x-travel: 736 mm (29 y-travel: 410 mm (16 z-travel: 1388 мм (55 Speed range: 4000 U/min Cutting diameter: 610 mm (24 Turning length: 1388 мм (55 Chip removal device: ja Tailstock: ja Overall dimensions: 5000 × 2920 × 2920 mm Chuck size: 310 mm Tool turret - slots: 60 C-axis: 360° (Genauigkeit 0,0001°) Spindle opening: 81 mm (3,2

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Fgodpjxk Tzgofx Afish

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,300 mm, table width: 450 mm, table length: 750 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,900 kg, workpiece weight (max.): 500 kg, Travel X/Y/Z 400/350/300 mm, spindle spped 1 - 4500 rpm, motor 4,5 KW, spindle ISO 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping, coolant device, spash guard, tool holders, manual Fodpfewb Erzox Afiegh

Condition: good (used), Year of construction: 2016, Ref. -No.: 10569 Manufacturer: SORALUCE Type: TA - 35 A Year of construction: 2016 Type of control: CNC Control: Heidenhain TNC 640 / TNC 7 Storage location: Halberstadt X-Travel: 3500 mm Y-Travel: 1400 mm Z-Travel: 1500 mm Feed force (X, Y, Z): 10000 N A-Axis: 2,5 ° C-Axis: 2,5 ° Turning Speeds: 6000 / 7000 / 12000 / 30000 / 40000 RPM Max. Torque: 479 Nm Max. Workpiece Weight: 7,8 t Rapid Traverse X/Y/Z: 25 m / min Table-Size (Lxw): 3860 x 1200 mm Power Capacity: 32 kW Tool changer: 40 Swivel range milling head: 2,5 x 2,5 ° Table load max.: 10500 kg Tool Taper: ISO 50, DIN 69871 AD Tool places: 60 Feed rate: 10 - 25000 mm / min Weight: 19 t Number Of T-Slots: 8 Pcs Width of the T-slots: 22 H12 mm Distance between the grooves: 140 mm Chip conveyor: 2 Pcs Further information: - Universal milling head for processing at any angle - Compact design for installation without a separate foundation - The machine design was analyzed, developed and optimized using the finite element method (FEM). - Cast construction for maximum stability - DAS+R vibration damping for increased productivity - Highest precision for decades - Milling head types Universal milling head - Vertical milling head with fourth axis and high-frequency spindle Fodpfx Afew Uplksiegh - Electronic handwheel with cable or radio - Coolant type Coolant / air / air with MQL - Coolant system via spray ring and IKZ up to 70 bar - Infinitely variable via Heidenhain AC servo motors including digital drive technology Machine can be inspected under power by arrangement.

Condition: excellent (used), Year of construction: 2011, Type: Conventional milling machine Manufacturer: Avia Model: FNE 40P Year of manufacture: 2011 Control: Conventional with digital display Serial number: 90494 Longitudinal travel (X): 620 mm Fedpfx Afjxk R Hajiegh Cross travel (Y): 420 mm Vertical travel (Z): 400 mm Table: 400 x 800 mm Max. workpiece weight: 400 kg Spindle taper: SK 40 Spindle speed: 40 – 4000 rpm Weight: approx. 2000 kg Digital display: Heidenhain ND 780 integrated in the control panel

Condition: like new (used), functionality: fully functional, spindle speed (min.): 4,500 rpm, table width: 280 mm, table length: 1,100 mm, rotational speed (max.): 4,500 rpm, table load: 350 kg, overall weight: 2,100 kg, input voltage: 200 V, workpiece weight (max.): 350 kg, input current: 200 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, SHIZUOKA VHR vertical milling machine for sale in new condition manufacturer: SHIZUOKA MACINE TOOL co.LTD. type: VHR SD Spindle taper ISO 40. 3 axis feed 3 axis with digital scale Axis travel longitudinal 820 mm, transverse 300 mm, vertical 450 mm. Fsdpfx Afswqgr Uoiegh table dimensions 1100x 280 mm (3 'T' slots). Maximum table load 350 kg. . Spindle speed range: low 75-480 rpm, high 550-4500 rpm. p length: 1600mm machine width: 1755mm machine height: 2190mm machine weight: 2100kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. Fedjxf Inkspfx Afiogh The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10521 Manufacturer: LAGUN Type: CM 6 Year of construction: 2009 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Spain X-Travel: 6000 mm Y-Travel: 1200 mm Z-Travel: 2000 mm C-Axis: 0,001 ° Rapid Traverse X/Y/Z: 30 m / min Table surface area (LxW): 7500 x 1100 mm Tool changer: 60 Drive power spindle: 60 kW Table load max.: 5.000 kg Tool Taper: SK 50 Spindle Speeds: 6.000 RPM Fgodpfx Afoxc Tttjieh Further information: Automatic universal swivel head 1° x 1° incl. accessories, tools, holders 4th axis preparation (rotary table) Positioning accuracy: ± 0.030 mm Repeat accuracy: ± 0.010 mm Machine is in production and can be inspected under power at any time.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10290 Manufacturer: KOLB KLUEPPELBERG Type: Cubimat YC 2000 Year of construction: 2012 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Machine number: 016453-20.1 X-Travel: 7000 mm Y-Travel: 4000 mm Z-Travel: 4000 mm W-Travel: 2.000 mm Speed work spindle: 4.000 RPM Max. Torque: 2.100 Nm Max. Workpiece Weight: 20 t Table-Size (Lxw): 2.800 x 2.000 mm Table load max.: 18.000 kg Fedjxdaxlspfx Afiogh Tool Taper: SK 50 Tool places: 360 Distance Between Columns: 3.200 x 4.000 mm Further information: - 4 milling heads available - 1 universal head - Pick Up Head Station The machine can be viewed under power by arrangement.

Condition: new, Year of construction: 2025, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2025 Type of control: CNC Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Fgodpfx Afjxc Tr Ajish Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: good (used), Year of construction: 1985, Ref. -No.: 10595 Manufacturer: GILDEMEISTER MAX MüLLER Type: MD 6S Year of construction: 1985 Type of control: CNC Control: EPL 4 Storage location: Halberstadt Country of origin: Germany Tool holder type: 2 x VDI 50 Centre Distance: 1765 mm Spindle passage: 101 mm Fgodpfx Afoxc Tuwjioh Swing diameter over bed: 720 mm Swing diameter over cross slide: 490 mm Lathe chuck diameter, max.: 400 mm Power Capacity: 50 kW Weight Of The Machine Ca.: 16 t Turning Speed Range: 10 - 2800 rpm Quill holder: MK 5 Further information: - Equipment - Powered tools - Tailstock - Automatic quill stroke - Chip conveyor - Automatic sliding safety doors - Hydraulic steady rest - 2 turrets

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Fedpsxc Trpsfx Afiogh Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Fedpfxsw Upfdo Afisgh Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.