Used Alpine for sale (85)

Year of construction: 2011, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Hodpfx Afjhx N Rveienu Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the range below 5 - 10 µm. Some applications for this classifier are powder coatings where the final particle size distribution (PSD) is very important and both undesired ultra-fine dust and oversized material must be avoided. Other products that can be processed with this classifier are acrylate, epoxy polyester, gypsum, plastics, petroleum coke, polyurethane, spinel ,etc. Easy to clean and maintain. This classifier is fitted with a secondary air in the coarse discharge bottom part to ensure agglomerates dispersion and that no fine dust remains mixed with the coarser particles. Material of construction: stainless steel Scope: Hosokawa Alpine MikroClassifier CC22 from our previous generation with motor

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Hsdpfx Afema Snxoionu

Condition: used, Year of construction: 1991, Technical details: turning diameter over bed: 720 mm Hsdpfxjxfz Auj Afisnu turning dia. over face-slide: 430 mm turning length: - mm centre distance: 2000 mm control: Zyklengesteuert/cycle controlled revolution per minute: 1-1800 U/min max. torque on the spindle: 3200 /2700 Nm feed motor: 20000 N rapid motion - x-axis: 3,5 m/min rapid motion - y-axis: - m/min spindle passage: 106 mm operating hours - idle run: - h tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm max. workpiece weight between centers: 2500 kg max. workpiece weight -without tailstock: 500 kg voltage: 380/500 V control voltage: 24 V total power requirement: 33 KVA Weight approx.: 5,5 t dimension machine xH: 4 x 2,0 x 5,2 m

Condition: used, machine/vehicle number: 11796, Rotor diameter: 250 mm Rotor width: Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Hjdpfowbwunjx Afienu Drive motor: 5.5 kW

Condition: used, Year of construction: 1971, turning diameter over bed 500 mm turning diameter over slide rest 340 mm turning length 1000 mm turning diameter in the gap 650 mm turning speeds 21 - 1500 U/min centre height 250 mm spindle bore 46 mm total power requirement 5,5 KW weight of the machine ca. 1,45 t dimensions of the machine ca. 2,3 x 1,1 x 1,7 m Lead and feed spindle lathe - 4-jaw chuck 250mm - Multifix Quick-change tool holder Hnjdpfxsvu Hbxs Afieu - second steel holder on support - Steady rest - Chip tray - Machine light - Documentation

Condition: good (used), Technical data for pallet rack beam: Racking system: Voest Alpine Type: Megastar GS Included in delivery: 01x pallet rack beam, used Material finish: hot-dip galvanized CS profile: 100 x 50 x 10 mm Hook bracket: 4 HK (hooks) Clear span: approx. 2,700 mm 02x locking pins, used Design: completely galvanized For securing the cross beams Hedpfx Afoxb Dqgeisnu Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipment of this item is required, this will incur additional costs, which can be requested from us separately depending on the delivery location and scope of delivery.

Year of construction: 2010, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Hnodpegulp Djfx Afieu Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Classifier jet mill Hosokawa Alpine 630 TFG specifically designed for toner grinding, can be used together with the Alpine 250 TTSP air classifier to produce the perfect product. Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 630 TFG with 18,5kW motor, process gas distributor, rotary valve, filter, rotary valve, blower, control cabinet

Year of construction: 2006, operating hours: 8,830 h, condition: good (used), functionality: fully functional, machine/vehicle number: R1153413, Alpine mill including complete plant for sale Cutting mill: Rotor diameter: 600 mm Rotor width: 1000 mm 6-knife rotor Year of manufacture: 2006 Included: Material feed belt (designed for automotive bumpers), mill, conveyor line for packaging into octabins or big bags, dedusting system. Condition: Very well maintained, regularly and promptly serviced Inspection: In operation until recently, currently still powered and available for on-site inspection at any time Ready for operation: Immediately available and fully functional The machine is in very good condition and is ready for immediate use. Hnodpjxd Aiasfx Afiju

Condition: used, Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 570 mm, turning diameter over bed slide: 340 mm, spindle speed (max.): 2,500 rpm, The machine operates fully. The machine bed is in excellent condition. Runs very quietly. Hnedpsw E D Rqsfx Afiju

Condition: ready for operation (used), Center height: 165 mm Center width: 1000 mm Swing diameter: over bed 330 mm Spindle bore: 36 mm Hedpfov E D Nbsx Afijnu Spindle mount: size 4 Tailstock taper: 5 MK Spindle speeds: 30 - 2500 rpm Feeds: longitudinal/transverse 0.045-0.63/0.023-0.324 mm/rev Thread pitches: 0.6 - 0.56 mm Electrical connection: 380 V, 2.2 kW Space required: 1800 x 900 x 1480 mm Weight: approx. 550 kg

Condition: used, machine/vehicle number: 11795, Rotor diameter: 250 mm Rotor width: Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Hnjdpfx Aewbwvxefiou Drive motor: 5.5 kW

Condition: good (used), Internal item no.: 25047 Lead and feed screw lathe Voest Alpine DA160 + 3-axis digital readout (Heidenhain) + Set of 36 collets, including drawbar + 4x Multifix tool holders (size "A") + Drill chuck + 2x fixed centres + Röhm 3-jaw chuck 160 mm Technical details: Centre distance: 650 mm Centre height: 165 mm Swing diameter: 330 mm Spindle bore: 36 mm Speed range: 30 - 2500 rpm Hsdpfsw Hrv Dex Afijnu Dimensions (LxWxH): 150 x 90 x 175 cm Weight: approx. 600 kg

Condition: refurbished (used), Year of construction: 2018, Used agitated ball mill Hosokawa Alpine PV 800 Pulvis Scope of supply: Pulvis grinding system including gas distributor, feeding screw, flap valve, classifier mill Pulvis PV 800 with TTD 315 classifier head, mill motor 37kW, classifier motor 45kW, filter, flap valve, blower and switch cabinet. Technical details: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation. Normal steel with wear protection - ceramic (mill only) A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Pulvis agitated ball mill combines our ball mill technology and know how directly with our air classification technology in one single machine to obtain ultra fine end products in one single step. Hnsdoqmn Utjpfx Afiju This system is in good condition and with not much use. It features a TTD classifier, a significant improvement over our standard ATP air classifier model, allowing to reach even finer product or reduce wear or energy consumption, depending on the application and operative parameters.

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Hjdpfevdu N Aox Afionu

Condition: used, - Heidenhain ND 780 digital position display - Röhm 3-jaw chuck Ø 250 mm - Multifix quick-change tool post - Coolant system - Chuck guard Hnjdow Hgtdopfx Afiou - Chip backsplash - CE compliant - Year of manufacture: 1981 Specifications - Distance between centers: 1000 mm - Center height: 210 mm - Swing over bed: 420 mm - Swing over cross slide: 280 mm - Tailstock quill: MK4 - Spindle bore Ø: 52 mm - Number of spindle speeds: 12 - Speed range: 33 – 1500 rpm - Longitudinal feed range: 0.0705 – 4.336 mm/rev - Metric threads: 0.488 – 30.08 mm - Imperial threads: 0.844 – 52 tpi - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions W x H x D: approx. 2200 x 1600 x 1100 mm - Weight: approx. 1500 kg

Condition: used, machine/vehicle number: 10875, 3-blade rotor 2 rows of stator blades Rotor diameter: 280 mm Hjdpfjghgfzex Afisnu Rotor width: 600 mm Inlet cross-section: approx. 280 x 600 mm Weight: approx. 800 kg

Condition: refurbished (used), Year of construction: 1999, Fully refurbished Hosokawa Alpine Pharmapaktor APC L200/30 used standalone system by Alpine Originals. Technical details: Construction materials: Non product contacted parts: stainless steel Hjdovq Nlxjpfx Afijnu Product contacted parts: stainless steel Non pressure shock resistant (NPSR) Non ATEX (can be implemented for an additional price) Without vacuum deaeration (can be implemented for an additional price) Scope of supply: Hosokawa Alpine Pharmapaktor APC L 200/30, including feeding, without Flake Crusher. The Hosokawa Alpine APC L200/30 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end product sizes and forms, from different sort of briquettes to granulates according to the required specification. Thanks to its flexibility, the machine can be adapted to different products and tasks. It even complies with the tough pharmaceutical standards. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Hnjdpfowk Nk Tjx Afiju

Condition: used, machine/vehicle number: 11647, Rotor blade row: 3 Stator blade row: 2 Rotor width: 280 mm Rotor diameter: 280 mm Hodpfeghgqzex Afienu Inlet dimensions: 300 x 300 mm

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Fully refurbished Hosokawa Alpine ARC MS 36 used compactor by Alpine Originals. Technical details: Product contacted parts in stainless steel Non product contacted parts in normal steel Non ATEX, Non Pressure Shock Resistant (NPSR), can be operated inerted with N2 (not part of our scope) Scope of supply: Hodpfevq Nq Usx Afisnu Feeding, MS 36 compactor and control cabinet The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 1983, condition: ready for operation (used), Center height: 180mm, center width: 800mm, turning diameter over bed/face slide: 380mm/200mm, spindle bore: 52mm, speed: 1500rpm, bed width: 330mm, quill stroke: 180mm, quill holder: MK4, machine dimensions X/Y/Z: approx. 2000mm/850mm/1450mm, weight: approx. 1050kg. On-site inspection is possible. Hodpjv Amp Sefx Afisnu

Condition: used, machine/vehicle number: 11634, Rotor diameter: 600 mm Rotor width: 1000 mm 6-knife rotor - cross shear cutting rotor 2 stator knife rows Inlet cross section approx. 650 x 100 mm Drive motor 75 kW Machine features: The cross-shear cutting rotor ensures optimum material intake as well as distribution and thus high outputs with reduced energy consumption. Hsdsghgqdopfx Afionu Electro-hydraulic opening of the mill top and the screen basket. The sieve insert can be rotated 180° and reused after one-sided wear. Adjustment of the rotor knives outside the mill by means of an adjustment device reduces downtimes.

Year of construction: 1999, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine APC K 200-50 pharmapactor with Flake Crusher AFC 300. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Specially built for pharma industry. Material of construction: - product contacting parts: stainless steel - none product contacting parts: stainless steel Non Pressure Shock Resistant (NPSR), non ATEX Scope: Hnedpfei E Himjx Afiju Hosokawa Alpine Pharmapaktor APC K200/50 with 4,0 kW motor, feeding screw with 1,1 kW motor + Flake Crusher AFC 300 with 0,75 kW motor

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Hedowxfaajpfx Afijnu

Year of construction: 2024, condition: new, functionality: fully functional, Hosokawa Alpine MZM 1-40 classifier system by Alpine Rentals. Stand-alone lab scale air classifier, perfect for highly precise separation of small batches into a coarse and fine fraction. Adjustable cutting point, ranging from 0,1 to approx. 6 mm. Can be used for sorting and separating different materials. Thanks to the plexiglass cover it is ideal to observe the classification process inside the classifying tube. Technical details Stainless steel, plexiglass and glass Non ATEX, Non Pressure Shock Resistant (NPSR) Air flow 6-60m³/h Throughput approx. 3-30kg/h Maximum feed size approx. 10mm Scope of supply Hosokawa Alpine MZM 1-40 zigzag classifier complete with supporting frame, including feeding bin, cyclone, glass collecting bottles and vacuum cleaner. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Hnjdpfewxwwkox Afiju We are also interested in buying back disused HOSOKAWA ALPINE machinery