Used Alois Kober for sale (31)

Condition: used, tank capacity: 67,000 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: Total height estimated according to drawing (slight deviations possible); Cylinder manhole NW 600; Test pressure: 1 bar Internal diameter: 3,000 mm Total height: 11,200 mm Other: Wall thickness: 10/5/6 mm Mounting type: Feet Location: Outdoor storage Technical documentation: Drawing Volume: 67,000 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 8,800 mm Pgsdpfx Adoxqb Arsnew Last use: Solvents VESSEL Heads: Dished ends (Klöpperboden) Number of feet: 4 EQUIPMENT Manhole / Dome: On cylinder, on top head (DN 600) Outlet (alternative entry): 80 mm TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 10 mm Top head wall thickness: 6 mm

Condition: used, Step Conveyor, Step Lift Conveyor KÖBERLEIN & SEIGERT Type A 400 / 2000 Feeding technology, feeding system, incline conveyor, angled conveyor, steep incline conveyor Serial No. Year of manufacture 2003 Slider width 400 mm Slider thickness 40 mm Conveying steps 10 units Transfer height at incline conveyor 2200 mm Transfer height lateral at the feeder 1800 mm Filling height 750 mm Conveying angle 75° Motor power 1.5 kW Motor speed 1450 rpm Power supply 400 Volt, 50 Hz - Low-wear sliders - Electromechanical drive - Counter-rotating slider system - Driven by three-phase motor - 4 height-adjustable feet Pgedpfx Adotqwryjnsw Required space L x W x H 2000 x 1600 x 2500 mm Weight approx. 1400 kg Good condition

Year of construction: 2002, condition: ready for operation (used), A step conveyor Köberlein & Siegert is available. Step width: 850mm, step height: 600mm, step depth: 5.5mm, machine depth: 1300mm, machine height: approx. 3500mm. An on-site inspection is possible. Podpfxow Ni Nfo Adnjgw

Condition: excellent (used), functionality: fully functional, Linck high-performance frame saw Type DS 71. Frame opening: 710 x 710 mm. Stroke: 500 mm. Speed: 320 rpm. Hydraulic roller lifting with adjustable roller pressure. Hydraulic feed, continuously adjustable from 0 - 13 m/min. Automatic overhang adjustment of the saw frame. Electromagnetic remote control. Jansen hydraulic saw tensioner with saw insertion. 55 kW motor with reduction gearbox. Hydraulic clamping carriage with hydraulic auxiliary carriage. Dismantled and loaded free onto truck. A video showing the saw in operation can be provided on request. Pgjdjuqmu Hspfx Adnsw

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, measuring range Z-axis: 420 mm, Equipment: documentation/manual, Zoller Smile Presetting Device Pgedpfxexxm Ays Adnsw 24" screen with keyboard tray Powered C-axis Spindle locking at 90 and 120 degrees for rotary tools Includes label printer and labels Original price: €19,700 Adapters supplied as required

Condition: used, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Milling machine, second-hand Make: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial No. 9401487 Technical data: X-travel 762 mm Y-travel 406 mm Z-travel 508 mm Spindle holder: SK 40 Spindle speed 8000 rpm Pgedpfjtud Utex Adnew Machine weight: 3800 kg

Condition: new, mileage: 500 km, power: 353 kW (479.95 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGS 26.480 6x2-4 BL GSR NEW EURO6 with Meiller AK 16NT skip loader GSR - Turning Assist, Lane Departure Warning, Emergency Brake Assist, Rear View Camera, etc. First Registration: without registration Mileage: 500 Color: Pure White RAL 9010 Technical Specifications KW 353 * HP 480 * Tires - front axle + rear axle: 315/80R22.5 TL * Gross Vehicle Weight 26,000 * Emissions Class Euro 6E * Automatic Transmission * Condition: New Vehicle Chassis Equipment * Wheelbase: 2600 mm * Cruise Control * MAN Tipmatic 12.26DD Transmission * Rock-Free Transmission * Exhaust Pipe, Right-Side Floor Outlet * Driver's Cab (M-Cabin) * Front Axle Offset, front springs 8.0t * Rear axle air suspension * Rear axle hypoid * Steered, liftable leading axle * 290L aluminum tank and 24L AdBlue * Rockinger TYPE 400 G150A trailer hitch * ABS, ASR, and ESP * Disc brakes front and rear * Lifting roof * Sun visor * Air-suspended driver's seat with lumbar support and shoulder adjustment * Heated driver's seat and armrest * Multifunction steering wheel Pgjdpfxei Tkako Adnew * Digital tachograph, CONTI * Toll Collect preparation * MAN EASY Control panel with 2 memory buttons in the driver's door * Air conditioning, Climatronic * Dark Moon Grey interior color scheme * Storage box * Work lights on the cab roof * LED daytime running lights, stone guard * Fog lights and cornering lights * Preparation for rotating beacons on the cab roof * Preparation for radio with CB radio antenna on the cab Roof * MAN Navigation Advanced media system with 7" display * MAN sound system * Smartphone integration * GSR (General Safety Regulation) * Emergency braking assistant (EBA) * Lane departure warning (LDW) * Turning aid * MAN Attention Guard * Alcohol Interlock ready * Traffic sign recognition * Rear view camera * Tire pressure monitoring system Body equipment * Meiller AK 16 NT skip loader * Loading bridge 3,930 mm long, * Telescopic support arms with optimal guidance thanks to hexagonal profile and self-leveling control * Suitable for transporting containers with a volume of 20 m3 according to DIN 30720 * Meiller 2-circuit pump type 216/101 * Meiller safety eyes * I.S.A.R. Control version 3 radio remote control with start-stop * Electric control with speed control and rapid traverse * Pneumatic triple tipping hooks with tipping hook safety device * 3.5 mm aluminum floor * Lateral older clamping device (BKE) * Hydraulic container locking system (CV) via rear locking hook * Aluminum container with 140L lid * Duo-Matic Technical specifications KW 353 * HP 480 * Front and rear tires 315/80R22.5 TL * Total weight 26000 kg * Emission class Euro 6E * Automatic transmission * Condition new Chassis equipment * Wheelbase: 2600 mm * Speed control * MAN Tipmatic 12.26 DD gearbox * Driver's cab NN (M-cabine) * Front axle offset, front spring 8.0 t * Rear axle air suspension * Rear axle hypoid * Leading axle steered, lift * 290L aloy tank and 24L AdBlue * Trailer hitch Rockinger 400G150A * ABS, ASR and ESP * Disc brakes front and rear *Roof * Sun visor * Driver comfort seat air * Seating heater * Air conditioning *Multifunction steering wheel * working lights on cabin * Day light LED and fog light *Preparation for signal lights on cabine and CB radio * MAN Mediasystem Advanced with 7" display and navigation * MAN sound system * Smartphone integration * Interior Moon Gray * MAN Easy Control with 2 Memory buttons in drivers

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, fully serviced, inspected, and operational after retrofit in 11/2025, Maximator JET certificate Availability: in 4 weeks Year of manufacture (cutting table): 2019 Operating hours (cutting table): 5,900 h • Effective cutting area: 2,000 mm (bridge) x 1,000 mm • Z-axis CNC clear height: 200 mm with Quick UP • TAC12 cutting head, A/B +/- 12° • Automatic height sensing and collision protection • NUM CNC control system • Rittal control cabinet on wheels • Operating PC with LED monitor, splash-proof keyboard and mouse • Waterjet software: SmartCut powered by IGEMS, subscription • Handheld control device • Laser positioning system • MJ 100 cutting valve Pgjdpfexvqvfsx Adnew • aJET 3D abrasive head • CNC abrasive dosing unit with intermediate hopper • Abrasive storage container, 1,200 kg, with automatic pressure feed system • High-pressure piping on axes, up to the cutting head • Safety system with light barriers • Water tray with heavy-duty slat support • Edge stops in X and Y • Machine feet: precision wedge mounts • Warranty: 1 year or 1,200 operating hours • High-pressure pump HYTRON 40.30, 30 kW, YOM 2006, 28,852 h, retrofit in 10/2025 with warranty, new pulsation damper with TÜV approval Technical data and prices subject to change and error. Prior sale reserved.

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with return conveyor and PU glue box, top condition Year of manufacture: 2010 Operating hours: 2,560 h Pgsdpevnwf Ujfx Adnow Total edge length: 211,844 m Edgebanding thickness max: 12 mm Panel thickness max: 60 mm Coiled material thickness max: 3 mm Minimum workpiece width: 70 mm Feed speed max: 18 m/min Infinitely variable feed speed Motorized height adjustment Granulate glue system Premelting tank BRANDT QUICKMELT KD glue system 2 x PU glue tanks Strip magazine Joint milling aggregate End trimming unit with 2 motors Flush/radius/chamfer stations: 1 Corner copying unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing station Aggregates synchronized NC axis/axes Design: right-hand machine Machine length: 5,760 mm Conformity marking: CE mark Ligmatech Boomerang return system PU glue box The machine is still in operation; inspection encouraged; available by arrangement No warranty Collection only, forklift available Net price plus VAT Price negotiable

Condition: used, Year of construction: 1993, pressing force: 160 t, Press brake used Make: BBM Model: AP ME 160-40 year of construction 1993 Pressure capacity 160 to. folding length 4050 mm Pgedpfxjtufbne Adnjw Table width 190 mm Stroke 250 mm throat 315 mm Equipment CNC control Swivel operation at the front right CNC backgauge (X-axis) CNC electric depth adjustment Manually adjustable stop fingers adjustable table crowning, by crank Rear and side guards 3 front support arms Double foot switch Accessories: 2 Multi-V-matrices as well as 1 brand. Deer foot stamp

Condition: new, Year of construction: 2023, OMAX ProtoMAX® waterjet cutting system The smallest industrial waterjet cutting system in the world! Due to its compactness and versatility, the ProtoMAX® waterjet cutting system is perfectly suited for small batch and prototype production as well as teaching applications. It can also be used to complement larger waterjet cutting systems. The small footprint allows it to be used in smaller spaces and mounting on casters makes it easy to relocate. Pjdpfem Dtgvjx Adnogw - Very compact complete system - Integrated high-pressure pump 2,000 bar - Abrasive system - Laptop with CAD/CAM system - Closed measuring system - Practical clamping system - Power connection 230 V - Connected load max. 4 kW - Incl. starter kit Personal Abrasive Waterjet. Price on request

Condition: used, Year of construction: 1987, Lead and draw spindle lathe Make: Boehringer Model: DUE 560 Year of manufacture: 1987 used Technical data: turning diameter 250 mm turning length approx. 1200 mm Rotation Ø over bed 560 mm Rotation Ø over facing slide 365 mm Max. workpiece between the centers 500-800 kg Spindle diameter in front bearing 100 mm Spindle bore 62 mm Spindle head DIN 55022 No. 8 Travel Pgjdjtud S Uopfx Adnsw Face slide travel 345 mm Top slide travel 125 mm Tailstock/pinsØ 80 mm Tailstock holder MK 5 Quill stroke 190 mm Longitudinal feed 60 x 0.0315-28 mm/1 Face feeds 60 x 0.016-14 mm/1 Tapping capacity 0.125-112 mm Total power requirement 20 kW Space requirement approx. 3.5x2.0x2.2 m Weight: approx. 2.5 tons

Condition: refurbished (used), Year of construction: 2006, operating hours: 28,852 h, functionality: fully functional, machine/vehicle number: 13006, High-Pressure Pump HYTRON 40.30 Manufacturer: Böhler, BHDT, BFT Year of manufacture: 2006, #13006 Operating hours: 28,852 h From previous ownership, fully serviced, inspected, and operational, Maximator JET certificate, new pulsation damper with TÜV (German Technical Inspection Association) certification! • Main motor drive power: 30 kW • Auxiliary unit oil/air cooler: 1.1 kW • Auxiliary unit booster pump: 0.46 kW • Flow rate: 3.4 l/min • Design pressure: 420 MPa • Max. operating pressure: 400 MPa • Continuous operating pressure: 380 MPa • Pulsation damper: 2.5 l • Oil tank volume: 140 l • Ambient temperature for oil/air cooler: 10–35°C • Width x Depth x Height: 1,900 x 970 x 1,520 mm • Weight: 1,250 kg • Max. sound level: 78 dB(A) • Pressure and flow rate-controlled drive hydraulics • Oil-air heat exchanger • Pulsation damper • Primary and secondary filter units • Infinitely variable pressure adjustment from 50 to 400 MPa • Alphanumeric display with event log • Pressure relief valve • Water booster pump • Setpoint display for operating pressure • Noise reduction enclosure Pgjdpfxjxfilke Adnow Price ex Schweinfurt plus VAT: €16,000 Additionally: • Transport • One-day training for up to 4 people in Schweinfurt, or optionally at customer site • Installation and commissioning

Condition: used, Double column press - Hydraulic Manufacturer REPKON Model 2000/800 kN Condition used description Pressure 200 t Column width 1600 mm ram stroke - max. 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% mm/sec Pressing speed 20 mm/s at 100% mm/sec Die cushion pressure 800 kN Die cushion stroke 150 mm Die cushion speed to 68/ from 225 mm/sec Conversion year: 2001 Podpfx Aeudb Hcsdnegw

Year of construction: 2023, condition: new, OMAX waterjet cutting system MAXIEM 2040 3D with angle cutting head A-Jet The cross-industry all-rounder for 2D and 3D applications! Waterjet cutting system from the modular OMAX MAXIEM series in bridge design, which perfectly combines decades of experience in abrasive waterjet cutting with a modular design. In terms of reliability, durability and maximum load capacity, the MAXIEM series leaves nothing to be desired. Low-noise and low-emission operation in conjunction with extremely simple PC-supported operation for precision at the push of a button predestine this series for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7. Pgedsm Dtf Uopfx Adnew - closed measuring system - digital drives - brushless servo motors - precision linear guides surface-hardened - portal (bridge) driven on both sides - maintenance-free IntelliTRAX drive - energy-efficient M3050 high-pressure pump - practical water level control - practical control panel trolley on castors - IntelliMAX control software for MAXIEM - high-precision 5-axis kinematics A-Jet - ... The precise solution for all abrasive waterjet cutting applications for any industry. Price on demand

Condition: used, Year of construction: 2018, Horizontal bandsawing machine Make: JAESPA Model: Compact 2.8 Year of construction: 2018 TECHNICAL DETAILS: Automatic band saw - horizontal Cutting diameter 280 mm Saw blade length 5080 x 34 x 1.1 mm Cutting area flat 330 x 280 mm Pjdpfx Adeudb Sfonogw Cutting width 330 mm NC control Feed 460 mm Cut-off lengths 9999.9 mm Speed 15 - 120 m/min Machine weight approx. 2.3 t Dimensions approx. 3250 x 1580 x 2050 mm Column design for heavy-duty, industrial use o Intuitive NC control of the machine via PLC WAGO and 7" color touchscreen. Frequency-controlled, infinitely variable belt drive Saw arm with highly sensitive feed movement via servo motor and ball screw ball screw Backlash-free linear guides in both columns Hydraulic material clamping with long-stroke cylinder in front of and behind the saw blade saw band Clamping vice and lifting jaws open on both sides with infinitely adjustable clamping pressure clamping pressure Material feed via servo motor and ball screw drive in chain dimension the repeating operation is clocked. Unlimited material feed length Fully hydraulic saw blade tensioning Automatic saw blade guide arm adjustment Fully equipped with chip conveyor

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Pjdoudbzyopfx Adnsgw Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Condition: used, Wide belt sander Pgsdpfxeudb R Io Adnsw used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Weight: 6200 kg

Condition: like new (used), Description of system area This is a pure component delivery Robot KR 8 R 1620 arc (HW) Pedpfjudb E Eox Adnsgw The KR 8 R1620 arc HW industrial robot stands out in its class thanks to its high flexibility and long reach with optimum payload capacity. Furthermore, the robot was specially designed and developed for the welding process. - Nominal payload: 8 kg - Maximum reach: 1621 mm - Number of axes: 6 - Position repeatability (ISO 9283): ± 0.04 mm - Installation position: any angle, floor, ceiling, wall - Protection class (IEC 60529): IP54 - Degree of protection central hand (IEC 60529): IP54 - Hollow shaft The robot mechanics are supplied in the color R0000 KUKA Orange. The color of the base frame differs depending on the robot model (exception: KR 3 AGILUS and KR AGILUS-2, delivered with grey base frame). Linear unit KL 250-3 1CA (carrier length = 8m/ stroke = 7.1m) -further data on request-

Condition: used, Year of construction: 1972, Milling machine used Make:Kunzmann Model: UF6N year of construction: 1972 Technical data: Table longitudinal travel automatic: 440 mm Table longitudinal travel by hand: 450 mm Transverse table travel 200 mm Table vertical travel horizontal/ vertical 465/500 mm Table size 860x240 mm Table swivels 45° on both sides Distance table/spindle 430 mm Spindle holder ISA 30 Quill stroke 60 mm Tiltability of the spindle head +/- 90 18 spindle speeds horizontal 32-1342 rpm 18 spindle speeds vertical 72-2888 rpm 6 automatic feeds lengthwise 13.12-164 mm/min 6 automatic cross feeds 26.24-328 mm/min. Spindle drive 1.8/2.6 kW Pgsdpfeudb N Dox Adnjw with inclinable vertical milling head/clamping vice/ Counter holder/collet chuck with collets Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Condition: used, Year of construction: 2018, Bed milling machine, second-hand Make: Austen Model AX 607 Year of construction: 2018 Control unit Basis HH 5-axis HSC bed-type milling machine for machining of long parts, such as beams. Was used for aluminum profiles in window construction and can also be used for light steel machining. steel. Spindle rotates and swivels. Machine moves on linear guides and has direct HH measuring systems. Technical data: X-travel 7000 mm Psdpfx Adju Rfh Tenogw Y-travel 600 mm Z-travel 600 mm Spindle speeds infinitely variable 20-20,000 rpm Spindle motor 11 kW Feed range X-direction 0-90 m/min. Feed range Y-direction 0-50 m/min. Feed range Z-direction 0-40 m/min. Tool changing device 15 Pos. Spindle holder 63 HSK- Total power requirement 50 kVA Machine weight 12 to. Space requirement 9x2x2.7 m

Condition: used, Year of construction: 2006, Electric tractor used Make: MAFI type: MTE 3/30 D year of construction: 2006 Vehicle ID No. 4930321 Drive: Electric Operation: Driver's seat Nominal tractive force 6000 N Dead weight with battery 3750 kg Preparation: air Axle load without load front/rear 200/1750 kg Track width front 1018 mm Track width rear 1026 mm Coupling height 415 mm Load height without load 990 mm Loading area length 1640 mm Loading area width 1290 mm Driving speed with/without load approx. 10/24 km/h max. tractive force with/without load 16500 N Pgjdpfsiv Hflex Adnow service brake hydraulic with trailer coupling

Year of construction: 2015, condition: good (used), Deburring machine, used Make: NS Maquinas Industrial Model: DM 1600 DC Year of manufacture: 2015 Working width: 1600 mm Minimum part size: 50x50 mm Power: 8 kW Number of cross belt stations: 1 Cross belt speed 2-8 mm/s Feeding speed 0,6-3,2 mm Extraction: Donaldson Performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel, or Psdpfx Adoikm Tkonogw aluminum that have been cut in a laser, shearing, or punching machine. Dimension; 2730x1740x1940 mm Weight: 1790 kg.

Year of construction: 2011, condition: excellent (used), Swivel bending machine Make: Schröder model: SPB EVO 3200//4.0 DU used year of construction: 2011 useful length 3240 mm max. sheet thickness 4,0 mm Pgedpolnixiefx Adnjw lowering bending beam 200mm stroke upper beam 650 mm bending center adjustment 80 mm max. speed 100/100 mm up/down max. bending speed 90 max. bending speed DU 150 mm max. bending angle 150 Ø min. bending inner radius 1,5 x t, mm motor power upper beam 2x4,24 kW dimension: Lx6332 mm x W 2380 mm weight 12260 kg.

Year of construction: 2002, condition: used, Vertical circular saw Make : Berg + Schmid Model : VKS 370 A year of construction : 2002 used Technical data: Cutting range saw blade 350 mm 90° round 110 mm/square 85x85 mm/ flat material 180x85 mm 45° Re round 105/square/85x85/ Flat material 130x85 mm Psdpfx Ademu Al Aenogw 45° Lks round 110/square 85x85 mm/ Flat material 130x85 mm 60° round 105/square 85x85/ flat material 90x85 mm max. saw bladeØ 370 mm speeds 2 speeds 15-70 rpm. motor power 1,5/2,2 kW 400 V dimensions: WxDxxH 1800x1200x2100 mm Weight without coolant 710 kg Accessories: Coolmatic incl. short roller conveyor 1000 mm