Used Alligator Shear for sale (1,576)

Condition: used, dimensions of the machine ca.:1000 x 550 x 1100 m Hjdpscxxqnefx Aahop

Condition: used, sheet width - max.:200 mm plate thickness:4 mm Hsdpfx Aaocxxn Eehsp dimensions of the machine ca.:0,90 x 0,50 x 2,70 m

Condition: used, Year of construction: 1988, machine/vehicle number: 46922, sheet width:2.050 mm plate thickness:1,5 mm distance between columns:2100 mm column arm:100 mm table width:300 mm number of strokes - loaded:50 total power requirement:4,0 KW weight of the machine ca.:1,85 t Hodpjcxxrasfx Aahjp

Condition: used, Year of construction: 1982, machine/vehicle number: 10628, sheet width:3000 mm plate thickness:4 mm distance between columns:3300 mm Hedpjcxxzlofx Aahep rear stop:700 mm strokes per minute:19 - 50 Stk/min engine output:7,5 kW total power requirement:ca.10 kW weight of the machine ca.:ca.5 t dimensions of the machine ca.:3,7 x 1,5 x 1,9 m

Condition: good (used), Greaves 1000L high shear mixing vessel 316 stainless 1000L high shear mixing vessels, side inspection doors for shear maintenance, 13Kw motors, high shear overhauled 2017, level detection, 50mm discharge pipe, 3Ph Hedpfx Aaoulz Haohep

Condition: like new (used), functionality: fully functional, Year of construction: 2017, Motorized guillotine shear Manufacturer: HM, Model: JBS 2000 x 3mm Year of manufacture: 2017 Technical data Manufacturer: HM Model: JBS 2000/3.0 Year of manufacture: 2017 Usable length: 2025 mm Sheet thickness: 3.0 mm Shear angle: 2° Motor: 4 kW Dimensions: approx. L 2.65 x W 1.85 (plus 0.4m support arms) x H 1.40 m Weight: approx. 2 t Equipment - Cutting line illumination with LED - Controlled back gauge 600 mm - Rear safety guard using a light curtain - Rubber-coated clamping beam - Self-lubricating guide rails - Angle stop Hodpfezaawhjx Aahop - 2 x support arms - Operating manual - Small parts chute towards the front All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Hodpfxoqzky Eo Aahep Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: good (used), functionality: fully functional, Year of construction: 1993, For sale is a panel shearing machine from the manufacturer LVD. Technical data: Manufacturer: LVD Cutting width: 3,000 mm Max. cutting thickness: 13 mm (steel) Back gauge: 1,000 mm Weight: approx. 9,000 kg The machine is currently powered and can be inspected by prior appointment. A functional test on-site is possible. Further information is available upon request. Subject to changes, errors and prior sale. Available from week 30. Hjdpfx Aaezb Rt Nehjp

Condition: used, Year of construction: 2006, sheet thickness (max.): 6 mm, Brand: DURMA Type: VS 3006 Year of manufacture: 2006 Maximum sheet width: 3080 mm Hsdpswrx Tajfx Aahjp Maximum sheet thickness: 6 mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. Hedpfx Aajy Uquhshop German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: good (used), functionality: fully functional, fuel type: diesel, DGUV certified until: 11/2026, Year of construction: 2019, operating hours: 1,517 h, machine/vehicle number: CAT00330KNDH00178, For sale is a Caterpillar scissor lift model 330 GC, manufactured in August 2019, with only 1,515.6 operating hours. It is equipped with an attached Demarec (Kingshofer) shear, model DRS-60-B. Hsdpfxezb Nmhe Aahsp The machine is available immediately and can be inspected in the port of Karlsruhe by prior arrangement. Further information is available upon request. The sale is exclusively to commercial customers. This offer is non-binding and subject to a detailed technical and legal review as well as a contractual agreement between the parties.

Condition: good (used), functionality: fully functional, Hydraulic Guillotine Shear SAGITA Working width: 2500 mm Shearing capacity: 5 mm Electric back gauge Foot pedal, machine feet Condition: Good, blades OK, cuts cleanly. Hjdpfx Aaeyv Ikcohep Can be inspected under power. Loaded free of charge from D -88433 Schemmerhofen.

Condition: good (used), Year of construction: 1999, sheet width 3050 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes max. 35 Hub/min Hedpfx Aaoy U N H Aohop cutting angle 2°10 table height 905 mm table width 390 mm back stop - adjustable ca. 750 mm Control konv. engine output 3.0 kW weight of the machine ca. 1750 kg range L-W-H 3730 x 2070 x 1400 mm New price approx. 45.000 euros (!!) Special price on request Equipment: - robust / motorized swing cut guillotine shears - Machine with electric material / backgauge * Traverse path approx. 750 mm (infinitely variable adjustment range) * analog position indicator * Manual adjustment from the front - unbreakable and torsion-free welded steel construction - Compact and clear machine construction - 1x hold-down beam - Integrated sheet holding system for thin sheet blanks - sheet/cut material removal at the front (operator side) - 1x side stop with mm scale - Extendable table extension (approx. 350 mm) - 1x freely movable foot switch - operating instructions

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Hsdpfx Ajy D U Dfsahsp Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: good (used), puncher 100 t square edge steel 50 x 50 mm round bar steel 50.0 mm L-beam 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.) Ø 30.0 x 26 mm Hodpoy Uy Spjfx Aahop shear: flat material 600 x 15 mm throat 300 mm work stroke 80.0 mm work height max. 1165 / 960 mm total power requirement 9.0 kW weight 2250 kg range L-W-H 2050 x 1200 x 2050 mm well-maintained condition (!!) current new price approx. 30.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations * Flat steel shears * Profile steel shears * Hole punch * notching station - driven by two hydraulic cylinders - Infinitely variable stroke adjustment - Support table at hole punching station - Material scraper - Lateral storage options - 2x freely movable foot switches - Many accessories included in the scope of delivery * swiveling machine lamp * Various punch dies * Spare blades for the flat steel station ... etc. - Operating instructions (PDF)

Condition: used, puncher 70.0 t round bar steel 45.0 mm square edge steel 45.0 x 45.0 mm L-beam 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.) Ø 27.0 x 20 mm shear: flat material 450 x 15 / 300 x 20 mm throat 300 mm work stroke 70.0 mm Hsdpfx Aasy Uy Siohjp work height max. 1095 mm total power requirement 9.0 kW weight 1925 kg range L-W-H 1800 x 1200 x 2000 mm current new price approx. 25.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations * flat steel shears * profile steel shears * hole punch * notching station - driven by two hydraulic cylinders - stepless stroke adjustment - support table at hole punching & notching station - material stripper - side storage options - 2x freely movable foot switches - operating instructions (PDF)

Condition: new, Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving your hands free to align the workpiece. Technical data: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Downholder pressure: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy shear blades with a high chrome content - Upper blade with 2 cutting edges, lower blade with 4 cutting edges - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Lateral stop with double scale - Feed worktable with ball rollers - Full-length front intervention guard - Hydraulic, independent hold-down device - Manual back gauge 600 mm - Overload-protected hydraulic system - Safety foot switch Options: - Hydraulic sheet holding device - Increased motor power for more strokes / min - Back gauge with lifting function Hodpetvnczefx Aahsp - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC back gauge 800 mm with M15S control unit - CE conformity

Condition: used, total length: 5,500 mm, total width: 2,400 mm, total height: 2,100 mm, Colour: Yellow Weight: 21.000 kg - Documentation available: No Hedoy Uwp Sopfx Aahop - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 5150 - Backgauge depth [mm]: 1000 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 21000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: P40T 5,7", working width: 3,100 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, back gauge adjustment: CNC-controlled, power: 37 kW (50.31 HP), Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HGM B20-3100 – 20 mm x 3100 mm Hydraulic Guillotine Shear The HGM B20-3100 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, shipbuilding, the energy sector, and high-capacity metalworking applications. It features a 20 mm sheet metal cutting capacity and a 3100 mm cutting length. Hedpfxozbyupo Aahop Thanks to the ELGO P40T touch-screen CNC control unit, motorized back gauge system, Rexroth hydraulic system, and dual-speed cutting technology, it offers high performance and precise cutting. Standard Features Throat Depth: 250 mm Cutting Length: 3100 mm Cutting Angle: 2.75° Distance Between Columns: 3410 mm Cutting Capacity: 20 mm ELGO P40T 5.7” Touch-Screen CNC Control Unit 5.7” TFT touch screen Manual operating mode Single-part processing Program memory Up to 2A digital outputs Automatic calculation of cutting angle and pressure based on material Automatic cutting program Rear sheet support system RTS (Return To Sender) function Manual Blade Clearance Adjustment System Programmable Back Gauge Retraction System Automatic lifting for parts exceeding 1000 mm CRONOSSTECH X-axis Motorized NC-Controlled Back Gauge X-axis travel distance: 1000 mm Speed: 150 mm/s Accuracy: ±0.05 mm Steel body construction Hardened ball screw Optionally available with 1250 mm or 1500 mm Front Support Arms 1000 mm length Scale measuring system T-slot Retractable stopper Retractable Front Finger Guard System 1000 mm retractable front guard cover Optional full-size retractable guard system Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 – SILCL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection class 24V DC power supply Emergency Stop Buttons Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) CRONOSSTECH Premium Front and Rear Cabin Guards Professional appearance Wide field of vision Ergonomic design Rexroth Hydraulic System Dual-Speed Cutting System Two different cutting speeds Faster operation on short parts High-speed cutting up to 60% of maximum capacity Energy-saving standby mode Optional Features 1250 mm or 1500 mm X-axis back gauge Full-size retractable front guard system Technical Specifications Cutting Capacity (450 N/mm²): 20 mm Cutting Capacity (700 N/mm²): 13 mm Cutting Length: 3100 mm Cutting Angle: 2.75° Number of Pressure Cylinders: 17 Cutting Speed / Fast Mode: 6 / 9 hpm Distance Between Columns: 3410 mm Table Height: 925 mm Table Width: 605 mm Throat Depth: 250 mm Back Gauge Travel (X-axis): 1000 mm Machine Length: 4790 mm Machine Width: 3850 mm Machine Height: 2540 mm Oil Tank Capacity: 495 L Motor Power: 37 kW Machine Weight: 19 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: used, Year of construction: 1997, total length: 4,200 mm, total width: 2,200 mm, total height: 2,000 mm, Weight: 13.500 kg Cutting bench, cutting shear, Guillotine shear Type: Hydraulic Type: Conventional Manufacturer: Safan Type: HVR 430-6 Year: 1997 Max. working width: 4300mm Max. sheet thickness: 6mm Electric backgauge 1000mm + stacking-station Motor-power: 15kW Machine-dimensions: 5200x2200x2000mm Machine-weight: 13500kg - Year: 1997 - Documentation available: No - CE certificate present: No - Drive system: Teach-in - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4300 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Options: Digital readout - Transport dimensions: 4200mm x 2200mm x 2000mm (l x w x h) Hedpswng R Sofx Aahsp - Transport weight [kg]: 13500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1997, total length: 9,530 mm, total width: 2,750 mm, total height: 2,950 mm, Weight: 55.000 kg Cutting bench, cutting shear Type: Hydraulic Manufacturer: Safan Type: HVR 850-8 Year: 1997 Overhauled: 2021 (also new blades) Hjdpowng Nbsfx Aahjp Controls: Conventional Electrical back-gauge Cutting width: 8500mm Max. thickness: 8mm Back gauge: 1000mm Motor power: 15 kW Incl. documentation Machine dimensions for transport: 9530x2750x2955mm + extra parts Machine as a 550mm Sword; you can also put this machine on blocks (see drawings). Machine weight: 55000kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B 9329 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 8500 - Backgauge type: Electric - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Transport dimensions: 9530mm x 2750mm x 2955mm (l x w x h) - Transport weight [kg]: 55000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Technical details: round bar steel: 32 mm square edge steel: 30 angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Hjdpfju Icghsx Aahep Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition *

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m Hodeu Icppopfx Aahep further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm Hsdpfeu Icp Asx Aahep table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm round: Ø 20 mm square: 18 mm height over floor: 900 mm machine weight ab.: 200 kg dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock * Hsdpfxju Icqao Aahop