Used Alexis Pressure Reducer for sale (17,612)

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. Kdedsz E Nh Nepfx Ahbeu The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel, with a working and maximum allowable pressure of 11 bar, is designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. The tank is made of galvanized steel sheet, providing an excellent protective barrier against external factors and corrosion and significantly extending the service life of the unit compared with standard painted tanks. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Ksdpfszwlzfex Ahbsdu Key Features of the 500 L Galvanized Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. Galvanized finish – the tank surface is galvanized, providing an attractive appearance and high resistance to demanding conditions in workshops and production halls. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality construction – durable galvanized external coating provides long-lasting protection. Space-saving vertical design – allows efficient use of available space in the workplace. Compliance with standards – the tank meets pressure equipment safety requirements and is suitable for registration with the Polish Office of Technical Inspection (UDT). Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a galvanized coating resistant to external factors and corrosion. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection ports: 6 pcs. – diameters 1 1/4", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Specification Value Weight 130 kg Number of connections 6 Connection sizes 1 1/4", 2", 1/2" Dimensions 2030 × 600 mm Tank capacity 500 L Working pressure 11 bar Maximum pressure 11 bar Wall thickness 4 mm Diameter Ø 600 mm Height 2030 mm

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel with a working pressure of 16 bar is a reliable solution designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 500 L Pressure Vessel Professional pressure-rated construction – made of high-quality 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 16 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating provides long-lasting protection. Space-saving vertical design – allows efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 16 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. Standard Equipment Connection ports: 6 pcs. G1/2" – 2 pcs. G2" – 2 pcs. G1 1/4" – 2 pcs. Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Tank capacity 500 L Maximum allowable pressure PS 16 bar Test pressure PT 22.88 bar Maximum allowable temperature TSmax 50°C Minimum allowable temperature TSmin -20°C Diameter 600 mm Height 2110 mm Kdedpfxezwmlfs Ahbeu Weight 160 kg Connections 6 G1/2" connections 2 pcs. G2" connections 2 pcs. G1 1/4" connections 2 pcs.

Condition: good (used), ManuMatik / KraussMaffei High-Pressure Cylinder These high-pressure cylinders come from a commutator press and were in use there until the very end. Overall height: 184 cm Cylinder height: 150 cm Rod circumference: 28 cm Diameter: 8.90 cm The following components are included: Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Kdsdpfx Aehtyxlehbju Scope of delivery: 1 x press unit Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2026, functionality: fully functional, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Large Capacity – 500 Litres – enables stable supply to pneumatic installations and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1¼", 2", and ½" allow flexible integration with various installations. High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is designed for intensive use in industrial environments. The body is made from structural steel with a wall thickness of 4 mm, ensuring resistance to pressure up to 11 bar and long-lasting operation. All welds undergo strict quality control, and the tank’s surfaces are protected with an anti-corrosion coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE mark and the UDT notified body number, confirming its approval for use in both the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 6 pcs – diameters 1¼", 2", ½" Kdedpfoxbzbpsx Ahbeu Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 270-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 270 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. Ksdpszwl H Iofx Ahbedu UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 270-litre capacity – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 5 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 270-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1 1/4", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Specification Value Weight 92 kg Number of connections 5 Connection sizes 1 1/4", 2", 1/2" Dimensions 1825 × 500 mm Tank capacity 270 L Working pressure 11 bar Wall thickness 4 mm Diameter Ø 500 mm Height 1825 mm

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: Kdedpfx Ajwc Afhohbju SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve Kodpfoupyw Ejx Ahbjdu ✔ Basic personal protective equipment

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 1,100 mm, total height: 1,805 mm, total width: 650 mm, pressure: 60 bar, type of input current: three-phase, empty load weight: 140 kg, input voltage: 400 V, fuel: electricity, heating capacity: 3 kW (4.08 HP), overall weight: 240 kg, water tank capacity: 100 l, temperature: 45 °C, input current: 16 A, The enclosed cabinet, made of stainless steel, delivers a high-pressure solution (up to 60 bars) for precise and optimal cleaning or degreasing of mechanical parts. This compact washing station operates in a closed-loop system, making it highly economical in terms of product usage and suitable for any maintenance workshop. STANDARD FEATURES: • Adjustable high-pressure washing pump, up to 60 bars • Foot pedal control • 60-micron filter • High-pressure spray gun • Compressed air blower inside the cabinet • Air blower for cleaning the window • LED lighting • Heating element controlled by an adjustable thermostat • Low-level control and safety cut-off • New gloves • Year: 2020 • Weight (kg): 140 Kjdjz Tfbcjpfx Ahbodu • Dimensions (L x W x H mm): 1100 x 650 x 1805 • Work surface (mm): 850 x 650 • Payload (kg): 50 • Usable washing height (mm): 600 • Tank volume (L): 100 • Operating pressure (bar): 30 to 60 • Pump flow rate (l/min): 14 • Heating power (kW): 3 • Electrical supply: 400V Three-phase – 16A • Pneumatic supply: 6 - 7 bars

Condition: used, Year of construction: 2011, operating hours: 3,690 h, functionality: fully functional, machine/vehicle number: W09D500THBAD43025, operating pressure: 500 bar, total length: 3,695 mm, high-pressure hose length: 50,000 mm, total height: 2,026 mm, total width: 2,050 mm, pressure: 500 bar, empty load weight: 1,695 kg, input voltage: 12 V, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32.4 kW (44.05 HP), temperature: 150 °C, DGUV certified until: 11/2028, Dynajet 500TH 28 l/min at cold water Maximum pressure: 500 bar 3695 operating hours Kodpfsz Eg Dhox Ahbedu Recently serviced Imported to Sweden in 2026 WITH HOT WATER UP TO 150°C!!!

Condition: like new (used), Year of construction: 2026, operating hours: 40 h, functionality: fully functional, pressure: 2,500 bar, year of last overhaul: 2026, We are selling our IBAK MicroGator with a UHP high-pressure water cleaning system for main pipelines DN 200–DN 800. The robot was only used for one project and has not been used since. * Only 4 months old * Used for only 5 working days * No signs of wear – like new * Equipped for Ultra High Pressure (600–2500 bar), compatible with Falch and Hammelmann * Original price: €66,000 * Our price: €50,000 (negotiable) The robot is currently located in the Czech Republic. However, after prior arrangement, it can also be made available in the Cham area in Bavaria. Kdsdpez Aupiofx Ahbju Filip Khol rohrsanierung1a.de

Condition: ready for operation (used), functionality: fully functional, Description: A complete compression testing station, consisting of a 20T hydraulic press from RYS and a professional measuring system from AXIS, including a ZEMIC strain gauge. The equipment comes from a SHILOH production plant that is being decommissioned in Bielsko-Biała. It was used for force insertion tests, strength tests, and quality control. The set includes: RYS FR-5019 hydraulic press – 20T AXIS force meter – PEAK, PRINT functions, units in kg/N/lbs ZEMIC load cell (strain gauge) – range 2000 kg Blocks, fixtures, and tools as shown in the pictures Analog pressure gauge Hydraulics and hoses Table height adjustment on bolts Applications: Force insertion tests Laboratory testing Quality control and R&D Kjdez Rvywepfx Ahbedu Assembly and disassembly of components Design workshop / toolroom

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Kdedpfxjzgq Szo Ahbou Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: used, Year of construction: 2020, general refurbished, very good condition with preevacuation filling valves: 16 Kdodpfsz S Rb Sex Ahbou working direction: right-left (CCW)

Year of construction: 2024, condition: like new (used), functionality: fully functional, Stainless steel steam sterilization autoclave Pass-through autoclave, GXMQ-KK.13.8JS Model: STAU-26.3 Serial No.: G2310 Power: 11 kW Kdjdsz Td Alspfx Ahbsu Voltage: 380V/50Hz & 230V/50Hz Operating pressure: +0.5 bar / -0.88 bar Weight: 20,000 kg Self-dismantling and removal included.

Condition: used, Year of construction: 2019, operating hours: 196 h, functionality: fully functional, machine/vehicle number: W09D013KWKAD43636, operating pressure: 500 bar, total length: 2,910 mm, high-pressure hose length: 500 mm, total height: 1,770 mm, total width: 1,720 mm, pressure: 500 bar, empty load weight: 760 kg, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 760 kg, water tank capacity: 300 l, fuel tank capacity: 70 l, power: 13 kW (17.68 HP), temperature: 95 °C, volume flow: 0.9 m³/h, noise level: 104 dB, pressure (max.): 500 bar, Equipment: chassis, crane, This well-maintained DYNAJET 500th 15 HELI hot and cold water high-pressure unit is available for immediate delivery. Manufactured in 2019 and having only 196 operating hours, the machine is in excellent condition and is being delivered fully serviced, fully functional, and ready for operation. Designed for demanding industrial cleaning applications, the DYNAJET 500th 15 HELI combines powerful cleaning performance with compact dimensions, low weight, and excellent mobility. With an operating pressure of up to 500 bar and hot water temperatures up to 95°C, the machine is ideally suited for removing heavy contamination, coatings, grease, and industrial residues. The unit is equipped with a reliable Kubota diesel engine, integrated hot water system, and a large 300-litre water tank for independent operation even where external water supply is limited. The trailer-mounted design ensures maximum flexibility and easy transportation between jobsites. To ensure many years of reliable operation, the machine will be supplied with a brand-new 50 m high-pressure hose. A turbo nozzle and standard flat-jet nozzle are included in the sale. Key features and advantages: * Year of manufacture: 2019 * Only 196 operating hours * Fully serviced before delivery * Fully functional and ready for operation * Maximum operating pressure: 500 bar * Flow rate: up to 15 l/min Kdodpfxjz Nd Ndj Ahbju * Hot water temperature up to 95°C * Powerful Kubota 3-cylinder diesel engine * Integrated hot water system with high-performance burners * 300-litre integrated water tank * Approx. 70-litre fuel tank * Trailer-mounted unit with overrun brake * New 50 m high-pressure hose included * Turbo nozzle included * Standard nozzle included * Compact, robust and easy to transport *Ideal for industrial cleaning, surface preparation and professional service applications Please contact us if you are interested or would like to receive further information, pricing details, additional photos, or arrange a viewing of the machine. We will be pleased to assist you.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Kdsdpfoz Dhrqex Ahbou Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, Year of construction: 2015, operating hours: 5,201 h, functionality: fully functional, machine/vehicle number: W09HKF1011SHB8027, operating pressure: 550 bar, total length: 3,950 mm, high-pressure hose length: 50 mm, total height: 1,880 mm, total width: 1,870 mm, empty load weight: 1,200 kg, fuel: diesel, overall weight: 1,800 kg, water tank capacity: 500 l, noise level: 93 dB, DGUV certified until: 03/2027, Oertzen PT500 30 l/min Maximum pressure: 500 bar 5200 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) Owned by the same operator since new For cold water only; heating element has been removed. Kdsdpez Ega Nofx Ahbeu

Condition: used, Year of construction: 2006, operating hours: 4,803 h, functionality: fully functional, machine/vehicle number: WPUD500H062000449, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,080 mm, pressure: 500 bar, type of input current: DC, empty load weight: 1,620 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32 kW (43.51 HP), DGUV certified until: 09/2026, Dynajet 500TH 30 L/min 500 bar 4800 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) New engine installed in September 2026, invoice available Imported to Sweden from Germany in 2021. Ksdpfxez Egmcj Ahbedu

Condition: used, Year of construction: 2011, operating hours: 8,176 h, functionality: fully functional, machine/vehicle number: WPUD500H0B2000955, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,070 mm, pressure: 500 bar, empty load weight: 1,630 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 34.5 kW (46.91 HP), DGUV certified until: 10/2026, Dynajet 500TH 30 l/min Ksdpfsz Egw Uox Ahbjdu Maximum pressure: 500 bar 8176 operating hours Regularly maintained, recently serviced, not in operation during winter (only April–October) Owned by the same operator since new For cold water only; can be retrofitted for heating water.

Condition: used, Year of construction: 1985, machine/vehicle number: 324-016, filling valves: 24 capacity / hour ca.: 4500 working direction: left-right Kdedez S Rd Hopfx Ahbsu filling system: vacuum filling Dim. L x W x H [m]: 1,8 x 2 x 2,4 Details: zentrale Höhenverstellung 1,80 Breit, 1,80 Tief, 2,50 Höhe

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Type LC 200 including a second pair of clamping jaws, width 200 mm Jaw width 200 mm Base body, type LC 160/200 (for jaw widths of 160 and 200) Base body width 164 mm Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Kdsdpfjzfimusx Ahbju Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Used, in good condition optional: Clamping jaws, width 160 mm, height 50 mm, new € 200.00 Aluminum jaws, width 200, height 60 mm, height 80 mm, new € 200.00 Worm gear € 100.00

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Year of manufacture: 2015 Motor power: 22 kW Stroke length: 182 mm Kdsdpfx Ahezz Achebsu Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, total width: 3,100 mm, total length: 11,500 mm, total height: 2,500 mm, overall weight: 2,500 kg, empty load weight: 2,500 kg, We offer this ready-to-use Lanemark Contino 550 SSP box cleaner, manufactured in 2009. Manufacturer: Lanemark Kdsdpozymicjfx Ahbsu Model: Contino 550 SSP Year of manufacture: 2009 Condition: ready to use Category: 32 Type: Box cleaner If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,909 h, functionality: fully functional, machine/vehicle number: 08241380, fuel: diesel, DynaJet 500 High-Pressure Cleaner We are offering for sale a professional DynaJet 500 high-pressure washer with a diesel engine and water heating system. Technical Specifications: • Type: DynaJet 500 • Model: DY Boiler • Fuel: diesel • Power supply: 12 V • Maximum operating pressure: 500 bar • Maximum system pressure: 600 bar • Maximum flow rate: 28 l/min Kdodpfjzuaftsx Ahbou • Maximum temperature at high flow rate: 80 °C at 28 l/min • Maximum temperature at low flow rate: 150 °C at 8 l/min • Power: 115 kW • Year of manufacture: 2009 Machine application: This professional high-pressure cleaner is particularly suitable for: • cleaning industrial equipment and machinery, • removing dirt, grease, and deposits, • cleaning construction and agricultural equipment, • cleaning production and operational areas, • demanding industrial and maintenance cleaning. Machine condition: • The machine is complete, • functional and operational, • diesel system with heating, • high-pressure design up to 500 bar, • the machine is equipped with a chassis for easy handling, • sold as a fully functional unit. The machine is suitable for companies seeking high-performance professional equipment for high-pressure cleaning in industry, construction, agriculture, or service operations.