Used Compressed Air Tank for sale (29,474)

Condition: used, Year of construction: 1997, Technical details: content: 500 cbm capacity in bar: 11 operating pressure: 11 bar weight of the machine ca.: 0,23 t dimensions L x W x H: Ø 620 mm x 1800 mm Pressure tank Pressure vessel according to directive 87/404/EEC Cedpfou Nz S Eex Agvorc Mark of conformity TÜV NORD 2017 Stands on base frame = steel profile frame welded. Connecting pieces: 1/2" with locking valve; 1/2" with plug; 1" with manometer; 1" with plug Connecting piece 2x left/right 1" with hose connection Temperature range min./max.: -10°C / +50°C Equipment: Ceiling support pressure hose (inside Ø 20mm) length 4m Pressure reducer with adjustable double connection *

Condition: used, Year of construction: 1994, Technical details: tank capacity: 150 l operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg Credpfxju Nz Tie Agvec For sale as shown and described, as an unpressurised tank for a sale at low price. Condensation drain valve at the bottom with hand lever 2 connection pieces 1/2 inch 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C pressure gauge *

Condition: ready for operation (used), Air receiver, compressed air tank, pressurized air vessel, Used equipment Csdpfx Agexciqnevsrc Manufacturer: Magnet Model: KF 904 Overall dimensions: Width: 800 mm Depth: 800 mm Height: 2680 mm Weight: 1008 kg Year of manufacture: 2016 Operating pressure: 11 Bar Operating temperature: -20°C to +50°C Tank capacity: 1000 liters

Condition: like new (used), Year of construction: 2011, functionality: fully functional, tank capacity: 2,000 l, usable tank capacity: 2,000 l, total length: 2,600 mm, total width: 1,200 mm, total height: 1,500 mm, outer diameter: 1,100 mm, overall weight: 580 kg, wall material: steel, wall structure: single-walled, number of chambers: 1, pressure (max.): 16 bar, overpressure (max.): 23 bar, Equipment: CE marking, 2000-liter horizontal air tank in like-new condition. Industrial air tank in excellent condition, ready for immediate use, fully equipped. Key specifications: Capacity: 2000 liters Operating pressure: 16 bar (test pressure: 23 bar) Year of manufacture: 2011 Weight: 580 kg Type: AIR tank Manufacturer: Vasipari és Tartálygyártó Kft., Debrecen CE marked, 97/23/EC certified Equipment: Pressure gauge (JAKO, 0–16 bar) Safety valve Csdpfx Asy S Af Hegvorc Automatic condensate drain (EWD 75, Made in Germany) Shut-off valve, filling valve, connecting flanges 2 cleaning openings (oval) Pressure switch Condition: Original blue paint. All fittings are in working order. Has passed pressure testing and is safe to use. Personal inspection and collection are possible. Shipping can be arranged individually. Price: €2700 net

Condition: good (used), - Manufacturer: Lohenner, Germany - Material: Steel - Surface finish: Fully galvanized Dimensions: - Diameter: 1150 mm - Length: 2140 mm - Height, including supports: 1300 mm Cjdpfxoy Sxqrs Agvorc - Test certificates, ASIT/SVTI/TüV: All available - In very good condition

Condition: used, Year of construction: 2003, Compressed air tank made of steel (galvanized) Technical dimensions / data: Available quantity: 1 Volume: 5000 liters Type of tank: pressure tank Outer diameter: 1400 mm Cylindrical height: 2870 mm Total height: 3710 mm Type of operating pressure: overpressure Operating pressure: 11 bar Operating temperature: -10 / +50 °C Equipment: Top: 2 x crane eyes 1 x ventilation Shell: 1 x manhole Csdpfxsv Hmd Ds Agverc 2 x 2" socket 1 x 1 1/2" socket 2 x DN 80 flange socket Bottom: 3 x pipe feet 1 x 3/4" socket on the outlet For further equipment, see photos

Condition: used, Year of construction: 2025, Technical details: content: 1000 cbm capacity in bar: 11 Crsdpfx Agsy I Rr Tovjc total power requirement: - kW tank capacity: 1000 l operating pressure: 11 bar dimensions of the machine approx. HxWxD: 2,32 x 0,8 x 0,8 m weight: 260 kg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, We offer a galvanized air receiver - 5000 l. Manufacturer - OKS Otto Klein GmbH. Maximum working pressure - 11 bar. Year of manufacture: 2018. Dimensions: Diameter - 1400 mm. Height - 3570 mm. Weight - 1050 kg. Air receiver including fittings - safety valve, pressure gauge, and flanges. Cedpsy Slkrsfx Agverc

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 591144, 2* galvanized compressed air receivers Including certificates Per air receiver: Design: vertical Air receiver volume: 5,000 l Max. overpressure: 11 bar Diameter: 1,400 mm Receiver height: 3,570 mm Weight: 1,050 kg Compressed air inlet connection: 2x DN 100 Compressed air outlet connection: 2x DN 100 Safety valve connection: G 2 Credpey Hx Dzefx Agvsc Pressure gauge set connection: G ½ Condensate drain connection: G 2½ Pressure vessel certification: RL 2014/68/EU Maintenance openings according to AD2000: 1x manhole Min. operating temperature: -10 °C Max. operating temperature: +50 °C Surface coating: galvanized

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 2 x 2000L Galvanised Compressed Air Vessels Including certificates Each vessel features: Design: vertical Compressed air vessel volume: 2,000 l Max. overpressure: 11 bar Diameter: 1,150 mm Vessel height: 2,375 mm Weight: 471 kg Compressed air inlet connection: 2x G 2½ Compressed air outlet connection: 2x G 2½ Safety valve connection: G 1 Manometer set connection: G ½ Condensate drain connection: G 2½ Vessel inspection: RL 2014/68/EU Service openings according to AD2000: 2x handhole Codpfjy Hx A Rex Agvsrc Min. operating temperature: -10 °C Max. operating temperature: +50 °C Surface coating: galvanised

Condition: used, functionality: fully functional, tank capacity: 20,000 l, usable tank capacity: 20,000 l, total height: 7,010 mm, inner diameter: 2,000 mm, wall structure: single-walled, operating pressure: 11 bar, Compressed air tank 20,000 liters Manufacturer: OKS Volume: 20,000 liters Crsdpfx Agswrn N Rovsc Operating overpressure: + 11 Bar Test pressure: + 14.3 Bar Operating temperature: + 50°C Dimensions: Overall height: 7,010 mm Cylindrical height: 5,710 mm Diameter: 2,000 mm Inside the cylinder: 1 x manhole (320 x 420 mm) 3 x threaded sleeves 1" 1 x flange connection DN100 PN16 DIN 2633 In the top head: 1 x threaded sleeve 1" 2 x crane lugs In the bottom head: 1 x threaded sleeve 1" 4 x pipe feet Incl. complete technical pressure vessel documentation

Condition: good (used), Pressure vessel 11 bar, 1500 Liter litre Cedpjg A Hc Hofx Agverc

Condition: good (used), Year of construction: 1998, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank Crodpfxsphun Eo Agvsc -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg

Condition: good (used), Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 150 L -Operating pressure: 11 bar -Dimensions: 1460/510/H530 mm Crsdpfxoya Dfio Agvec -Weight: 92 kg

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark Crjdpfx Agoxbzaljvec UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Crjdpfx Agoxby D Asvjc Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 1980, condition: ready for operation (used), Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of construction: 1980, operating pressure: 7bar, test pressure: 9.1bar, operating temperature: 20°C, medium: compressed air, capacity: 5300l. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15000l, operating pressure: 4ATÜ, test pressure: 5.2ATÜ. On-site inspection is possible. Codpfx Ageumwg Eoverc

Condition: good (used), Year of construction: 1990, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, pressure vessel vacuum vessel standing -Contents: 455 L -Operating pressure: max. 13 bar -Accessories: including attachments see photos Crsdowwg Aaepfx Agvoc -Quantity: 1x container available -Dimensions: 1020/755/H1900 mm -Weight: 518 kg/piece

Condition: used, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr Crodpfx Agsd Atx Eevoc -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg

Condition: used, Compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure vessel, compressor tank -Compressed air tank galvanized -Content: approx. 25 l -Dimensions: 630/470/H302 mm -Weight: 14.2 kg Cedpfx Ashubdxsgverc

Condition: good (used), Year of construction: 1992, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, vacuum container standing, galvanized -Contents: 455 L -Operating pressure: -0.6 bar / max. 16 bar -Accessories: including attachments see photos -Number: 2x containers available -Price: per piece -Dimensions: 860/650/H1610 mm Crsdowra H Iepfx Agvoc -Weight: 374 kg/piece

Condition: used, Compressed air receiver, air storage tank, pressure vessel KAESER Factory No. 481127K Year of manufacture: 2001 Tank capacity: 1000 litres Operating pressure: 11 bar - hot-dip galvanized pressure vessel - 3 connection fittings with 2" thread - 2 connection fittings with 1 1/2" thread - 3 connection fittings with 1/2" thread - 2 x small handholes for cleaning - 3 x ball valves - 1 x safety relief valve - pressure gauge - 2 lifting lugs on the top of the vessel Tank diameter: approx. 800 mm Cjdpfx Agoxpqzuovjrc Total height: 2300 mm with stand (without attachments) Weight: 230 kg Good condition

Condition: new, Year of construction: 2024, functionality: fully functional, tank capacity: 5,000 l, total width: 1,310 mm, total height: 5,060 mm, overall weight: 649 kg, operating pressure: 8 bar, pressure (max.): 8 bar, compressed air connection: 8 bar, pressure: 8 bar, temperature: -20 °C, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations. Credpfx Ager En S Dovsc

Condition: new, Year of construction: 2023, overall weight: 244 kg, total height: 2,270 mm, pressure: 11 bar, new KAESER compressed air tank 1000 liters upright, galvanized 11 bar (incl. fitting set and pressure gauge set) Year of construction: 2023 Cjdpfx Agjqt A Iqovorc High-quality compressed air tank in galvanized design. Galvanized inside and out in accordance with DIN EN ISO 1461 in an immersion bath. Connection piece for conical threads. Technical data: -Volume: 1000 liters -Overpressure max: 11 bar -Diameter: 800 mm -Tank height: 2265 mm -Weight: 244 kg -Compressed air inlet connection: 2 x G 1 1/2" -Compressed air outlet connection: 2 x G 2" -Safety valve connection: G 2" -Condensate drain connection: G 2" Tank acceptance: RL2014/68/EU Maintenance opening according to AD2000: 2 x hand hole Min. operating temperature: - 10°C Max. Max. operating temperature: + 50°C Surface coating: galvanized Convenient leasing possible for new machines via our house bank. Visit our retail store. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2024, functionality: fully functional, tank capacity: 5,000 l, total width: 1,310 mm, total height: 5,060 mm, overall weight: 794 kg, operating pressure: 11 bar, pressure (max.): 11 bar, compressed air connection: 11 bar, pressure: 11 bar, temperature: -20 °C, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. Crodpfxsr En Tao Agvec The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.