4th and 5th knife attachment for Trimmer

Müller Martini 4th-5th knife

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Dodeuf Sy Ajpfx Afkoup Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Year of construction: 2013, condition: used, Sewing machine Müller Martini Ventura MC (3215) Year: 2013 Description: - Colour monitor with touch screen - Semi automatic setting - Feeder - ASIR Automatic Signature Image Recognition: Asir III - 2 + 2 opening possibilities - Book block separator - Book stacker Dodpfx Ajrmyp Rofkjup - Roller table delivery - PIAB/Venturi

Condition: excellent (used), Kolbus casing in with joint forming by Smyth After general renovation at GM Gross. Still in production Dujdpewm E Rnofx Afkop Format / size 100x125mm - 260x350mm Book block thickness / Book block thickness 4-60 mm capacity from 500 -800 blocks per hour

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Foldingmachine for 8 pages ! Make: HEIDELBERG-Stahlfolder Type: TI 52-4 - 4 - RD Format: 520 mm built: 2010 Duedpfx Ajw I S Eysfkop Mach.-Nr.: 1224431350 - Continuus feeder - double infeed-suction-wheels - 1. fold-station 52 cm, 4 buckles - 2. fold-station 52 cm, 4 buckles - anti-noise-hood - center control-station for all functions - standard delivery - compressor - tools, technical documentation Price on request ,-- / FCA ex DK Availability: Immediately ! Please ask for further detailed pictures ! Video available !

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 280 0113 4023, THE MACHINE CAN BE VISITED AT OUR PLANT IN BOLOGNA. Dujdpfxjwd Shho Afksp

Condition: ready for operation (used), DANOBAT RTM 2500 – CNC Surface grinding machine | 2.500 mm Travel | 3.100 kg Table load Dusdpfjhq Ui Iex Afkop High-capacity surface grinder designed for precision flat machining of large workpieces. Robust, accurate, and ready for demanding production environments. 🛠 Key technical features: • Max. grinding length: 2,500 mm • Max. grinding width (with 100 mm wheel): 900 mm • Max. grinding height (with Ø500 mm wheel): 1,000 mm • Table surface area: 2,500 x 800 mm • Max. table load: 3,100 kg • Electromagnetic chuck: 2,000 x 550 mm • X-axis travel: 2,650 mm at 1–30 m/min • Z-axis travel (cross): 800 mm • Y-axis travel (vertical): 1,150 mm • Z feed speed: up to 8,000 mm/min • Y feed speed: up to 1,000 mm/min • Positioning resolution: 0.001 mm • Encoder measurement on Z and Y axes ⚙️ Grinding head details: • Wheel diameter: 500 mm • Bore diameter: 203.2 mm • Max. wheel width with recess: 100 mm • Peripheral speed: 26 m/s • Nominal speed: 1,000 rpm • Grinding motor power: 15 kW • Total installed power: 30 kW ✅ Additional features: • Prismatic guideways with Turcite coating • Angular grinding head • Paper band filtration system • Hydraulic unit power: 4 kW 📌 Perfect for high-precision large-part surface grinding. A solid solution for manufacturers who require size, stability, and sub-micron accuracy.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Dedpfx Ajmhhf Ssfkjup - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Heidelberg STA- M 30F Pharmacy Standing delivery Manufactured by Heidelberg, Germany. Can be connected to any Heidelberg, Herzog Heymann, MBO, Horizon, etc. folding machine. The device also works independently of the folding machine. Smooth adjustment of the delivery speed. Dujdjw D E Nlspfx Afksp Height adjustment. Packet counter with delivery shift.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. Dsdpfxev Nwgno Afksup If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock Duodpfx Aet H Nhhofkjp QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months