Used 3 Axis Digital Display for sale (45,483)

Condition: used, Year of construction: 2005, with PC, software & dongle to include various measuring probes Hnodpfx Afexgpubjisu

Condition: used, Year of construction: 2014, controller manufacturer: Sonstige, controller model: Datron CNCv9, _____ Description: Year of manuf. : 2014 Control : Sonstige Datron CNCv9 Speed : 60000 rpm Movement X/Y/Z : 520/650/240 mm In Generel: Year of manufacture:2014 Control system:Datron CNCv9 Speed:6,000 - 60,000 rpm X/Y/Z:520/650/240 mm Spindle: Technology:HF spindle Speed range:6,000 - 60,000 rpm Tool holder:6 mm collet chuck Tool clamping:Automatic with compressed air NC rotary table: Technology:Precision axis Type:PDA 360 Centre height:102 mm Workpiece diameter max.:195 mm Chuck:3-jaw chuck, pneumatically actuated Automation: Technology:Pick-and-place Lifting cylinder:Z-axis Gripper:1-fold gripper Workpiece carrier system:2x carrier plate Equipment: Tool magazine:15 stations Tool measurement:Tool setter Workpiece measurement:3D probe (X/Y/Z) Fire extinguishing system:Kraft & Bauer Set-up mode:Electronic handwheel Hnodpfx Afoxfylneisu Coolant system:Datron coolant system with ethanol

Condition: excellent (used), Digital display Make Heidenhain Type Positip 850 Hnodpsvx Nkdjfx Afieu Stock number (28595) The display is used and has been tested. Please note that the uneven coloring is due to poor photography.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Hsdjxdxhrspfx Afionu Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2006, operating hours: 6,650 h, functionality: fully functional, Equipment: documentation/manual, The used HAAS SL 30 THE CNC lathe is a fast, medium-sized, slant-bed numerically controlled lathe equipped with a tailstock, C-axis spindle, and a 12-position powered turret with VDI 40 tooling interface. The configuration also includes a tool presetter, chip conveyor, programmable tailstock body, hydraulic 3-jaw chuck 250mm BB, and fixed toolholders. Main features: Maximum workpiece diameter: 350 mm Maximum workpiece length: 826 mm Maximum bar diameter: 76 mm Spindle speed: 3,400 rpm Spindle power: 30 HP Year of manufacture: 2006, with only 6,650 spindle hours, CE compliant machine. Hnodpfjxdvarox Afisu

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Storage location: Nattheim Hodpfx Afovvi R Eoijnu

Condition: used, CNC Lathe - twin turret - subspindle Y axis NAKAMURA WTS150 CNC Fanuc, Series 16i-T Spindle - Subspindle 3x turrets, live tools + 2 Y axis (milling) 2x C-axis Conveyor LNS bar loader (short bars) Mimu machine tools Italy Standard pressure pumps – qty 2 40‑bar high‑pressure pumps with switch to direct high pressure to the three turrets Hsdpfx Afewxfq Sjienu Short bar loader, Quick Load Servo III model Standard Nakamura toolholder kit / 2 + 2 driven toolholders Polygon turning option on control; part ejection from sub‑spindle with modification for maximum part length 160 mm No. 1 external belt for finished parts

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: 828 D, _____ Description: Year of manuf. : 2021 Control : Siemens 828 D Speed : 12000 rpm Movement X/Y/Z : 550/550/510 mm Tool holder : SK40 Spindle: Hedpfx Afsxfflgeijnu Technology:Inline spindle Speed:12,000 rpm Power (max.):13 kW Tool holder:SK40 Work table: Clamping surface:850 x 650 mm Table load (max.):600 kg General: Tool magazine:24 stations with double gripper Rapid traverse in X/Y/Z:24 m/min Features/Accessories: Chip management:Chip conveyor Coolant management:IKZ system with 20 bar Tool measurement:Renishaw, TS27R Workpiece measurement:Renishaw 3D measuring probe (infrared) Additional equipment:Mechanical preparation for oil mist separator

Condition: used, Year of construction: 2001, functionality: unexamined, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,500 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 510 mm, table length: 760 mm, table load: 1,000 kg, For sale is a 3-axis CNC milling machine from the Hurco brand and the type VMX 24 Technical data: - Year of manufacture: 2001 - Control: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. part weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm Hjdpfx Asv Tcfkefijnu - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull bolts, which can be seen in pictures, are not part of the offer Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: good (used), Year of construction: 1999, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, table width: 420 mm, table length: 840 mm, table load: 300 kg, X - Travel: 600mm Y - Travel: 410mm Z - Travel: 520mm Table Length: 840mm Table Width: 420mm Table load: 300 Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 7.5kW Hnsdpfx Afoxdkcbeiju Speeds / ranges: 6000Rpm ATC / revolver: 22 Number of controlled axis:3 Length: 2000mm Width: 2050mm Height: 2535mm Weight: 2500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), The robot is used for spot or random dispensing of pastes or liquids Hnedpfxjhx Nh Re Afieu

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Hedpfx Aexcld Dofijnu Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: used, CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO Vertical Machining Center Type DMF 220 linear Serial No.: 15115223474 Year of manufacture: 2008 CNC 3-D contouring control Heidenhain iTNC 530 Travel X: 2200 mm, Y: 560 mm, Z: 720 mm Table size 2600 x 605 mm Table load capacity 2200 kg Table height above floor 870 mm Distance table to spindle nose max. 752 mm Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar DIN 69872 Spindle speed max. 12,000 rpm Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Feed rate 0–20,000 mm/min Rapid traverse X-axis 100 m/min Rapid traverse Y+Z-axis 50 m/min Power supply 400 Volt, 50 Hz, 73 kVA - 30-position tool changer Hnedpfxsw Iqt Ae Afisu - Internal coolant supply through the spindle, 40 bar (IKZ) - Air blast with minimum quantity lubrication for tool cooling - Air blast through spindle center via M-function - 2 rotating safety windows - Operating mode 4, process monitoring during production - Electronic handwheel at the handheld command station - Separate coolant treatment system, paper band filter with filtration sump - Chip conveyor for positioning under the work area - Centralised grease lubrication - Operating manual - Operating hours – control on = 75,188 h - Operating hours – program run or spindle on = 31,632 h - Controller with interfaces for data transfer, RS232C + USB Footprint L x W x H 650 x 400 x 280 cm Space requirement for main machine L x W x H 490 x 395 x 275 cm (with control panel) Space requirement for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg) Space requirement for coolant unit L x W x H 180 x 115 x 190 cm (500 kg) Main machine transport dimensions L x W x H 500 x 248 x 275 cm Additional transport space required for further parts 550 x 240 x 250 cm Weight of main machine approx. 12.5 t Good condition

Condition: as good as new (ex-display), Year of construction: 2023, Control : Heidenhain TNC 640 Travels X : 1,020 mm Travels Y : 520 mm Travels Z : 610 mm Clamping surface (L x B) : 1,160 x 520 Table load : 750 kg Spindle Speed : 15,000 rpm direct Tool holder: SK40 (BigPlus) DIN69872 In general Tool changer : 30-stations Machine bed : Meehanite cast Hnedpfx Ajt Dizvsfiou Repetitive accuracy : 0.008 mm Equipment Chip conveyor Coolant supply Elect. handwheel high pressure coolant

Condition: excellent (used), Year of construction: 2019, operating hours: 16,000 h, functionality: fully functional, AGFA TAURO H2500 LED First installed in August 2019, thi sprinter has 6 colors + double white. Hodpfow Ihyajx Afionu It has roll to roll option and 3/4 automation, ASANTI RIP included. Fully functional, demo possible. For further information please refer to enclsoed brochures. Presentation: The high-end hybrid Tauro H2500 utilizes UV LED curing to deliver stunning prints in six colors plus white or primer on both flexible and rigid materials. Boasting a printing speed of up to 390 m²/h, it has the power to enhance your productivity. The Tauro H2500 is a true hybrid printer, ruggedly built to easily handle extreme workloads, 24/7 printing, and a wide variety of rigid and flexible substrates. It is suited for substrate widths of up to 2.54 m and rigid media up to 4 m, offering you countless options to create eye-catching prints. Driven by Asanti workflow technology and optimized to work with Agfa’s high-pigmented UV LED inks, the Tauro H2500 LED takes on any challenge. Expect only high-quality vivid prints that stand out every time!

Condition: excellent (used), Year of construction: 2010, travel distance X-axis: 2,000 mm, travel distance Y-axis: 960 mm, travel distance Z-axis: 800 mm, table width: 900 mm, table length: 2,400 mm, table load: 4,000 kg, Rigid construction for Heavy Duty jobs Direct drive powerful processing in 2 stage gear drive Fully covered machine Distance spindle nose - table top 200 - 1000 mm Distance spindle nose - to column 1005 mm Ex. Honeywell Aerospace Hnedpfexbd Ryex Afisu Oil skimmer and Chip conveyor included  YOP 2007 deliverd in 2008 and 2009 X - Travel: 2000mm Y - Travel: 960mm Z - Travel: 800mm Table Length: 2400mm Table Width: 900mm Table load: 4000 Feed rate X-Axis: 16000mm/min. Feed rate Y-Axis: 16000mm/min. Feed rate Z-Axis: 16000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 30kW Speeds / ranges: 6000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 5960mm Width: 4840mm Height: 3630mm Weight: 18000kg

Condition: excellent (used), Year of construction: 2022, High-Performance Gantry Machining Center, 3-Axis Only 917 spindle hours (as of July 2025) Manufacturer: HEDELIUS Model: FORTE 65 Single Year of manufacture: 2022 Control unit: Heidenhain TNC 640 F Tool holder: SK40 Operating hours, approx. (as of July 2025): Spindle running time: 917 h Program running time: 1,119 h Machine powered on: 3,675 h TECHNICAL DETAILS: 3 axes Travel range, X, Y, Z axes: 1,320 mm, 650 mm, 600 mm Rapids X, Y, Z axes: 0-40, 40, 40 m/min Spindle power: 29 kW / 183 Nm Spindle speed: 50–14,000 rpm EQUIPMENT: ZeroClamp zero-point clamping system, 6/4-position Forte 65, 120 mm diameter IKZ internal coolant supply with 25 bar Inclined bed band filter system, 900 l LTA 3001 exhaust air filter (1,200 m³/h) Blow-off gun Rinsing gun Infrared receiver M&H 91.40 TNC 640 3D infrared touch probe M&H 25.50 Internal compressed air supply through main spindle via M-function (5 bar) 65-position tool magazine Fixed machine table Scraper-type chip conveyor Direct length measurement systems from Heidenhain Spindle chiller Automatic central lubrication for X, Y, Z axes Hjdpfxow U Egdo Afijnu Work area lighting Precision ground ball screws Control cabinet air-conditioning unit Spindle cooler Coolant supply, semicircular around spindle Original price over €250,000 This used machine can be inspected under production conditions. All information without guarantee – sale subject to exclusion of any warranties or guarantees. Prior sale reserved.

Condition: reconditioned (used), 3-AXIS DRILLING & MILLING CENTER WITH FIXED RIGHT-ANGLE HEAD, DUAL HORIZONTAL SPINDLES Brand: SCM Model: TECH Z 2 27 C Year: 2007 (Machine offered in working condition, reconditioned, without warranty) TECHNICAL SPECIFICATIONS: - Working area: Between lateral stops along X: 2650 mm Electro-spindle axis X travel: 2903 mm Electro-spindle axis Y travel: 1240 mm Vertical drilling bits Y travel: 1018 mm - Max. panel size for double-station machining: 1180 mm - Max. panel thickness: 180 mm - X-Y axes vector speed: 54 m/min - Z axis speed: 11.5 m/min - Z axis stroke: 200 mm - Main motor power: 2.2 kW (3 HP) - Spindle rotation speed: 4,000 RPM - Spindle taper type: M 10 - Machine weight: approx. 2,800 kg COMPONENTS: WORK TABLE: 4 beams for support suction cups L=1000 mm for automatic round suction cups with aluminum bodies (2 per beam) 2 additional universal supports H=25 mm 4 suction cup supports for contouring VACUUM PUMP with a capacity of 100 m³/h Centralized extraction conveyor Automatic centralized lubrication for X & Y axes Pneumatic workpiece support device for tables L=1000 mm MILLING: HSK 63 electrospindle with increased power of 7.5 kW - Rotation speed 1,500/24,000 RPM controlled by inverter - Right and left rotation selectable via CNC - (1) HSK 63 cone with (straight) tool holder included - Collet not included (tools not included) Rear tool changer magazine with 8 positions: R8L - Can hold 8 tools, each up to Ø 120 mm - Each toolholder seat supports up to 4.5 kg - Maximum total weight of tools and holders for magazine "R8L": 22 kg HORIZONTAL UNIT WITH 2 OUTPUTS for MILLING and GROOVING: - Rotation speed: 9,000/18,000 RPM - Motor power: 3 kW (4 HP) - Milling tool (front output) max. Ø 20 mm - Usable length of front milling tool: 110 mm - Milling tool (rear output) max. Ø 12 mm - Usable length of rear milling tool: 80 mm - Blade Ø 100 mm DRILLING: 12 independent spindles for vertical drilling (7 along X and 5 along Y) 3 independent heads, each with 2 spindles for horizontal drilling: * 2 heads along "X" (64 mm pitch) * 1 along "Y" INTEGRATED OPERATOR GROUP for FIXED disc cutter, for grooving along "X" - Disc cutter rotation speed: 4,000 RPM - Motor power: 2.2 kW Hnjdpfew E Hb Ssx Afiju - Disc cutter max. Ø 120 mm - Compressed air consumption: 150 nl/min - Extraction port: Ø 160 mm PC-OFFICE (Hardware configuration): - Operating system: Windows XP - 15" CRT color monitor - QWERTY keyboard - INTEL CELERON microprocessor, 2 GHz - 40 Gb hard drive - 128 Mb RAM - 3.5" floppy disk drive, 1.44 Mb - 52x CD-ROM drive (Machine offered in working condition, reconditioned, without warranty)

Condition: used, Univ. console milling machine REMA type X 6230 serial no. 98307 year of construction 1998 Travel X: 700 mm, Y: 250 mm, Z: 380 mm Table size 1100 x 300 mm Spindle holder ISO 40 Distance spindle nose - table max. 470 mm Pinol movement 55 mm Spindle speed Vertical 45-2000 rpm 12 steps Spindle speed horizontal 32-1600 rpm. 18 steps Feed speed X and Y axis 15 - 1200 mm/min. 18 steps Feed speed Z-axis 5 - 400 mm/min. 18 steps Rapid traverse X and Y-axis 2500 mm/min. Rapid traverse Z-axis 800 mm/min Hjdpfx Asunc A Iefijnu Vertical spindle drive 2.2 kW Horizontal spindle drive 4 kW Feed drive 1.1 kW Mains connection 400 Volt, 50 Hz - 3-axis digital readout SINO, type SDS 6-3V - Vertical milling head can be swiveled manually in two planes with drilling quill - Vertical milling head can be moved manually W-axis = 400 mm (4th axis) - Work table can be rotated +/- 45°, with 4 T-slots 14 mm, spacing 80 mm - Mechanical tool clamping via threaded spindle M16 - Manual central lubrication via hand pump - Coolant device in the machine base - recirculating ball screws - Horizontal milling shaft with counter bearing - Halogen machine light - Switch cabinet fixed to the machine Space requirement L x W x H 2000 x 1700 x 1800 mm Weight 2500 kg Very good condition

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 828D - ShopMill, _____ Description: Year of manuf. : 2022 Control : Siemens 828D - ShopMill Speed : 12000 rpm Movement X/Y/Z : 1300/670/625 mm Tool holder : SK40 Spindle: Technology:Directdrive Speed (max.):12.000 rpm Power (max.):21,8 kW Torque (max.):152 Nm Taper:SK40 Workingtable: Clampingsurface:1.500 x 670 mm Tableloading (max.):1.300 kg In general: Toolmagazine:30 Stations Rapid travers in X/Y/Z:36/36/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor with oil skimmer Hsdpow U Ia Tefx Afijnu Coolingmanagement:Internal coolant pump with Cyclon-filter and High-pressure, 20 bar Workpiecemeasurement:Touch probe, BLUM TC 50 Setup operations:Electronic handwheel Oilmistseparation:Mechanical extraction, Dormatec AF-20 Preparation 4th-Axis:Cable + plug Further Equipment:Spindle chiller, Trafo

Condition: excellent (used), Year of construction: 2012, For sale is a 5-axis machining center from Axa, model VHC 3-XTS. The machine is fully operational and functional, previously used in model making and mold construction—no heavy-duty machining. History: 2018: Spindle overhaul 2018: New spindle drive motor 2020: Spindle overhauled 2023: New ball screw for the Z-axis Hjdpfxowg E N Rs Afionu 2024: Geometry inspection performed Technical Data: Year of manufacture: 2012 Control: Heidenhain TNC 530 Heros 5 Total operating hours: 39,190 h X-axis: 2,600 mm Y-axis: 900 mm Z-axis: 900 mm C-axis: 360° B-axis: ±100° NC rotary table: RTA 4L-800 Measuring system: direct Spindle mount: SK 40 Tool changer: magazine chain, 36 tools Positioning accuracy: ±0.0075 mm Repeatability: ±0.005 mm Max. spindle speed: increased to 12,000 rpm Approval for operation mode 3 is available Machine length: 6,000 mm Machine width: 4,100 mm Machine height: 3,500 mm Required installation area: approx. 10 x 5 x 3.5 m Weight: approx. 26 t Features include: hinged belt chip conveyor, 2x hand rinsing guns, electronic handwheel, 3D measuring probe OMP 40 with Renishaw receiver Transport and loading can be organized Europe-wide upon request and at additional cost. All prices are subject to VAT. Viewing possible by appointment. Please contact us—the team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase & sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Digital display unit ZOLLER type 6051 Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Hjdpfx Asw Sgw Sefienu DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 760 mm, table length: 2,000 mm, table load: 1,400 kg, IKZ 15 BAar Measuring probe MP12 Bohrzyklus with torq depending Performance package Pendel screen Interface set Hnsdpsw Rntrofx Afiju X - Travel: 1740mm Y - Travel: 760mm Z - Travel: 660mm Table Length: 2000mm Table Width: 760mm Table load: 1400 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 4450mm Width: 3460mm Height: 2900mm Weight: 10500kg

Condition: used, Universal Tool Milling Machine with Active Digital Display DECKEL Type FP 1 Universal Milling Machine Machine No. 2102 - 3322 Year of manufacture: 1986 Travel distance X: 300 mm, Y: 150 mm, Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed (X and Y axes): 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Hodpfjr D T Uysx Afisnu Electrical connection: 380 Volt, 50 Hz - HEIDENHAIN active 3-axis digital readout, type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on vertical milling head: 60 mm - Vertical milling head swiveling and extendable 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant device integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on machine base - Operating manual, electrical diagrams, and spare parts list available Space requirements (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Hnedpfxsw Rm Die Afisu Weight: 6100kg