Used 10000 40 for sale (59,749)

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 7,510 mm, first registration: 12/2017, suspension: air, color: grey, tire size: 385/65/22.5, Year of construction: 2017, Equipment: ABS, = Additional options and accessories = - Disc brakes = Further information = Axle configuration Tire size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 40%; Tire tread right: 40% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Itsdpfsw Rx S Ssx Afien Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 40%; Tire tread right: 40% Dimensions Height: 172 cm Weights Unladen weight: 5,700 kg Payload: 33,300 kg Gross vehicle weight: 39,000 kg Maintenance, history, and condition Periodic technical inspection (APK): valid until 09/2025 Technical condition: very good Visual condition: very good Further information Please contact Bas Wolfs or Bas Wolfs for further information.

Year of construction: 2008, condition: ready for operation (used), Rated power: 2000W, frequency: 30kHz, heating power: 11.2kW, cleaning medium: aqueous, filling capacity: approx. 290l, transport mechanism: Lift, load capacity per lifting arm: 100kg. Machine dimensions X/Y/Z: approx. 2200mm/1400mm/2500mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Itodpsubyztofx Afisn

Condition: new, Year of construction: 2025, table size: 3000mm x 1500mm pressure: -0,85 bar machine length: 3100mm Iedpjmftlyofx Afijtn machine width: 1450mm weight: 480kg

Condition: used, Weiss Type: WK1/1500/40 Weiss Climate Test Chamber, Air-Cooled with Humidity Control (converted to use refrigerant R-452a) Temperature range: -40°C to +180°C Cooling rate approx. 2.5 K/min, heating rate approx. 3.5 K/min Temporal temperature deviation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature range: +10°C to +95°C Humidity range: 10% to 98% r.H. Temporal temperature deviation at center of test space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Itsdpfx Afjw Hctteisn Heat compensation In the range of +25°C to +95°C, at a relative humidity up to 90%: 500 W Test chamber dimensions: Height: 950 mm, Width: 1100 mm, Depth: 1475 mm External dimensions: Height: 2005 mm, Width: 1300 mm, Depth: 2450 mm Test volume: approx. 1540 liters Test chamber lighting: Halogen bulb 12V, 50W Rated voltage: 3/NPEAC 400V ±10% 50Hz Rated power: 11.5 kW, Rated current: 22.0 A Fuse on site: 32A slow-blow Protection class (control cabinet and operator panel): IP 54 Refrigerant: R-452a Weight: 920 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Year of construction: 2014, operating hours: 300 h, condition: excellent (used), functionality: fully functional, We offer a used ILAPAK CARRERA 1000/40 packaging machine, manufactured in Italy in 2014. The device has only been used for 300 hours. The machine is ideal for packaging food products in film (flowpack), ensuring high precision, efficiency, and reliability in everyday production. Technical specifications: Manufacturer: ILAPAK INTERNATIONAL S.A. Model: CARRERA 1000/40 Year of manufacture: 2014 Voltage: 400 V Frequency: 50 Hz Power consumption: 4250 W Isdpjw Rdk Hsfx Afietn Dimensions: Width: 580 cm, Height: 170 cm, Depth: 140 cm Country of manufacture: Italy Advantages: Low operating costs – only 300 hours of operation Ideal for packaging food products in a flowpack system Solid, durable construction Easy integration with existing production lines Energy and packaging material savings

Condition: good (used), Year of construction: 2005, Andreas Schmid Climatic Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3.000 /-40/+130 Temp. Range: -40°C to +130°C Program Controller: Stange SE - 502 Line Voltage: 400 V Rated Current: 32 A Refrigerant: R 404 A / R 23 Year of Manufacture: 2005 Ijdpjuuibkjfx Afiotn External Dimensions: W 1600 x D 800 x H 2430 mm TK-16 Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Ijdpfx Afjwcyd Ioiotn Total number of tool changer positions: 28

Year of construction: 2007, condition: ready for operation (used), A Selmatec pelleting press (ring die press) for biomass is available. Motor power: 15kW, die diameter: 360mm, die thickness: 40mm, working width: 40mm, rollers: 2, bearings: spherical roller bearings, throughput: approx. 500kg/h. Documentation available. On-site inspection is possible. Iedpewzld Rofx Afistn

Condition: new, Year of construction: 2025, table size: 3000mm x 1500mm pressure: -0,85 bar machine length: 3100mm machine width: 1450mm Itedpfx Aeipv Nrjfion weight: 425kg

Year of construction: 1982, condition: used, degree 1150 working heigth 200 mm length 1000 mm width 800 mm Itodpot Hw Rwofx Afisn depth 1400 mm Coil Weight per Base 300 kg Base Diameter mm Stack height 0 mm No. – Furnace 0 No. – Base 0 No. – Cooling Hood 0 total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: excellent (used), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Liter with Simcon 32-net Chamber is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratory, development, and quality assurance applications. Device Description: For sale is a professional temperature chamber from the manufacturer Vötsch Industrietechnik, model VT 7060 with SIMcon 32-net controller. This powerful unit is suitable for a wide range of demanding environmental simulations—from material testing and electronics tests to long-term climatic stress tests. Technical Data (Excerpt): Model: Vötsch VT 7060 Internal volume: approx. 600 liters Temperature range: –40°C to +180°C Isdpfx Afjwybb Noietn Temperature deviation in steady-state conditions: Temporal: ±0.1 K to ±0.5 K Spatial: ±0.5 K to ±2.0 K Temperature change rates (without test specimen): Heating: 4 K/min Cooling: 3 K/min Control system: SIMcon 32-net with touchscreen panel Interfaces: RS232, optional RS485/422 1 × port NW 50 mm left 1 × port NW 125 mm left 2 × ports, each NW 125 mm right External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 404A and R 23 Weight: approx. 675 kg For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented trial run. Shipping / Collection: Collection preferred Shipping on pallet via freight forwarder Europe-wide possible. (Shipping costs depending on effort) Condition: used Scope of delivery: (See picture) (Specifications and possible errors subject to change!) For further questions, please feel free to contact us by phone.

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40  Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 ltr. Temperature range: -40°C to +180°C Outside dimensions: 110 cm wide, 173 cm deep and 204 cm high Dimensions inside: 80 cm wide, 85 cm deep and 85 cm high Itjdpfeh Izh Iex Afisn Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2015, Briquette Diameter: 40 mm Power: 4,1 kW Press Output per hour: 30 kg/h depended on material Hopper opening: 900 x 900mm Controlled by PLC Hydraulic tank: 50l Autom. ON/OFF with level alarm Ijdpfsw Ewpgsx Afietn Oil temperature sensor Transport pipes Used machine in good condition

Condition: ready for operation (used), Year of construction: 2000, A Homag CNC 3-axis woodworking center is available. Travel X/Y/Z: 4800mm/1200mm/410mm, rapid traverse X/Y/Z: 80m/80m/30m/min, main spindle power: 12kW, tool places: 17, including 9 carriages, separate control cabinet, Gedore workshop trolley with some spare parts, Siemens vacuum pump and Gardner Denver vacuum pump. Documentation available. On-site inspection is possible. Isdpowa A T Tsfx Afijtn

Year of construction: 2004, condition: excellent (used), Year: 2004 X axis:50″ Y axis:26″ Z axis:25″ Motor Power:40 hp Spindle speed Rpm:7500 RPM Atc: 24 Spindle Taper: CT 40 Table width: 23″ Table length: 52″ Swarf auger Coolant tank Isdpjh Uqkysfx Afijtn 4th axis

Condition: used, functionality: fully functional, mileage: 248,640 km, gearing type: automatic, fuel type: diesel, color: orange, empty load weight: 10,090 kg, tire size: 315/80R22.5, tire condition: 70 %, axle configuration: 6x2, number of seats: 2, first registration: 02/2016, emission class: euro6, brakes: engine braking, suspension: steel-air, Year of construction: 2016, driver cabin: day cab, wheelbase: 3,800 mm, fuel: diesel, machine/vehicle number: 332761, Equipment: ABS, air conditioning, cruise control, differential lock, trailer coupling, Iveco AD260/40 6x2. Itodownfqwjpfx Afien Hooklift container truck. Palfinger hooklift. Comprehensive pre-delivery maintenance. 6-month powertrain warranty. More information on the Almerisan website.

Condition: excellent (used), Here we offer a Feutron climate test cell. Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Heating 2.0 on average K/min Cooling 2,0 in average K/min The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Humidity range 10... 95 % r.h. Iedpfjklv H Ijx Afiotn Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Year of construction: 1995, General Data Measurements width 2576 Measurements depth 2583 Measurements height 2770 Machine weight 6300 Main Drive Spindle speed range 8000 Spindle motor power 47 A Tool taper BT40 Movement X-Axis Movement 800 mm X-Axis Feed Force 1-5000 mm/min Itsdpfx Aowvmztefien X-Axis Rapid Traverse 20000 mm/min Y-Axis Movement 410 mm Y-Axis Feed Force 1-5000 mm/min Y-Axis Rapid Traverse 20000 mm/min Z-Axis Movement 510 mm Z-Axis Feed Force 1-5000 mm/min Z-Axis Rapid Traverse 15000 mm/min Workpiece Workpiece weight 700 kg Table Outer length 1100 mm Outer width 450 mm Tools Slots in storage 20 Max weight 8 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis MORI SEIKI MV 40B/40 vertical machining centre was manufactured in 1995. Consider the opportunity to buy this MORI SEIKI MV 40B/40 vertical machining centre. Contact us for more information. Application Types Milling

Condition: as good as new (ex-display), Year of construction: 2025, Briquette Diameter: 40 mm Power: 4,1 kW Press Output per hour: 30 kg/h depended on material Itodpfsvptrtex Afisn Hopper opening: 900 x 900mm Controlled by PLC Hydraulic tank: 50l New exhibition machine with 5 operating hours

Condition: like new (used), Year of construction: 1992, Retrofitted: 2023 Numerical control: SELCA 4045D Itjdpsugbqyofx Afijn Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 1200 mmZ axis traverse: 1250 mm Milling head Head type: Universal manualTool clamping system: HydraulicTaper nose: ISO 50 (DIN 2080)  /  Pull stud: DIN 69872Speed range: 20 - 2000 rpmSpindle power: 22 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000   /   10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approx.: 23500 kgMachine dimensions approx.: 11100 x 5392 x 3400 mm Accesories  Electronic handwheel: Joystick SELBOX S2External coolantGuarding Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: NH501CA0185, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS X-travel: 630 mm Y-travel: 600 mm Z-travel: 670 mm Tool holder: BT 40 Spindle speed: 14,000 rpm Tool changer: 60 positions Pallet changer with rotary table: 360x1° Max. workpiece weight: 500 kg Table size: 500 x 500 mm Iedpfjwtq Tbex Afistn MACHINE DETAILS Total power requirement: 56 kW Rated power: 66 kVA Machine weight: 9,700 kg

Condition: used, mytron Type: T2240 Temperature cabinet, water-cooled Technical data: External dimensions: width 1435 mm, height 1955 mm, depth 2590 mm Dimensions of the test chamber: width 1050 mm, height 1400 mm, depth 1600 mm Volume of the test chamber: approx. 2240 l Ijdpfx Aovtl Hqofijtn Opening for cables: 2 x 100 mm right 2 x 100 mm left Temperature range: – 40 °C to + 100 °C at 23 °C room temperature Temperature stability over time: +/- 0.5 °K Temperature stability over space: +/- 1.0 °K Cooling: water cooling, Inlet and outlet 1" internal thread Cooling water shut off by solenoid valve when device is OFF Fault display in the event of a refrigeration machine error Cooling water consumption: Inlet temperature approx. 15 °C, approx. 15 l/min, Drain temperature approx. 22 °C (with continuous cooling approx. 27 °C) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fuse protection: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each on the left and right side of the test room Exhaust air connection: DN 100 mm plug-in system Safety device: electronic overtemperature protection, permanently set Flue gas monitoring with horn Viewing window: five-pane glazing 130 x 360 mm Refrigerant: R 404 A approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss temperature chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber air cooled with Weiss condenser cooler Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -40°C to +180°C Temperature deviation in time in center of chamber ± 0,1 to ± 0,5 K Temperature deviation spatially ± 0.5 to ± 2.0 K Temperature gradient (acc. to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min Heat compensation max. 4500 W Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm maximum load (evenly distributed over the surface) of the test chamber floor 150 kg per insert grate 50 kg total load of the grate supports 100 kg Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11,5 kW Rated current 22 A Itodpfjp Dun Uox Afien Heat output water-cooled test chambers max. heat output to environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: ( converted to R-452a ) weight: approx. 840 kg Type: WT11-1000/40 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), White Temperature Cabinet Air cooled Here we offer a Weiss temperature cabinet. Weiss Temperature Cabinet With S!MCON / 32-Control Test chamber capacity : approx. 195 litres Test chamber dimensions: Height 750 mm, width 580 mm, depth 450 mm, outside dimensions: Height 1775 mm, width 870 mm, depth 1600 mm, Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation in time in useful space center: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Heat compensation max. 2300 W Refrigerant : R404 A 2,5 kg Weight : 490kg Type: WT3 - 180/40 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components Itsdpjgmhrfefx Afisn 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Here we offer a Weiss climatic test chamber. Water-cooled Test chamber lighting Halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation in the center of the chamber: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C 8000 W Heat compensation at -20°C 3000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the center of the usable space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH Test chamber dimensions: Height 950 mm, width 760 mm, depth 650 mm, External dimensions: Height 2025 mm, width 1090 mm, depth 2480 mm, Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated current: 24 A Rated power: 16.0 KW Refrigerant: R452A Weight: approx. 900 kg Type: WK-480/40/10 The following information is for your safety as a buyer! Itjdpfx Aeq Dpzysfijn The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.