Machining Center - Vertical

MIKRON UM 600

Condition: ready for operation (used), Year of construction: 1998, operating hours: 11,320 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle motor power: 15,000 W, tool weight: 13,000 g, number of axes: 3, This 3-axis MIKRON UM600 TNC 410/426 was manufactured in 1998. It features a maximum longitudinal movement of 600 mm, transverse movement of 500 mm, and vertical movement of 450 mm. The machine is equipped with a robust table size of 520 x 900 mm and a maximum table load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON UM600 TNC 410/426 vertical machining centre we have for sale. Contact us for further details. • Machining spindles (vertical and horizontal) • Drive power (44% duty cycle): 15 kW • Drive power (100% duty cycle): 6 kW • Motor torque: 50 Nm Bjdpfx Adsy D Thvjreli • Max. torque at spindle (44% duty cycle): 800 Nm • Number of gear stages: 4 • Max. tool diameter: 130 mm • Included options: in-machine measurement and fast spindle • Feed drives (AC) • Programmable feed rate X/Y: 0 – 15,000 mm/min • Programmable feed rate Z: 0 – 12,000 mm/min • Rapid traverse X/Y: 15,000 mm/min • Rapid traverse Z: 12,000 mm/min • Coolant system • Reservoir capacity: 150 l • Flow rate: approx. 20 l/min • Clamping table • Table size: 520 × 900 mm • Number of T-slots: 4 • T-slot width: 14 H7 • Tool changer TCD 44 • Tool positions: 22 • Tool diameter: 80 / 130 mm • Max. tool length: 350 mm • Max. tool weight of Tool changer TCD 44: 6 kg • Max. workpiece weight in drum magazine: 200 kg • Chip-to-chip time: 20–25 s • Tool change time: 12–16 s • Electrical connection • Total installed rated power: 15.8 kW • Useful/connected power: 12.3 kW • Operating voltage/frequency: 3 × 400 V / 50 Hz Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Bledsx Hgg Depfx Adrsi

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and immediately ready for operation. Technical data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Setup dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organized upon request at an additional charge, Europe-wide. Prices plus VAT. Inspection by appointment possible. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING AND SELLING OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? Blsdewx Naqopfx Adrji For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Bledpfjqagugsx Adrei

Condition: used, Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x H7 max. table load 700 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 49,7 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 4 axes (+ NC dividing head) Bedpfxsx A H Rlo Adrjli - Swivel-Millinghead - Spindle refurbished - NEW X, Y, Z guideways - NEW ball screws - NEW X-axis bellows

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Bledeqt Dmyopfx Adrji Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Machine new white-color in 2014 (order by SIEMENS Energy) Technical Data Working area Max. swing over bed: 570 mm Max. swing over cross slide: 365 mm Max. turning length: 1500 mm Centre height over flat bed: 280 mm Max. workpiece weight: 400 / 1000 kg Max. workpiece clamping length: 1300 mm Work spindle Spindle head DIN 55027, size 8, internal taper 70 Spindle bore: Ø 62 mm Spindle diameter in front bearing: 100 mm Spindle through-hole (depth): 200 mm Max. chuck size: Ø 315 mm Speed range: 3–2500 rpm Max. faceplate diameter: Ø 560 mm Max. faceplate speed: 700 rpm Max. torque: 1800 Nm Carriage – travel Longitudinal travel (Z-axis): 1160 mm Cross travel (X-axis): 345 mm Tooling system: Parat-3 Tool cross-section DIN 770 (h × b): 32 × 25 mm Tailstock Tailstock movement by hand Quill taper: MK5 (MT5) Quill diameter: 80 mm Quill stroke: 190 mm Accessories / special equipment CNC control: SINUMERIK 810 D 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual 094.0003.1330-00 3-jaw chuck Ø 315 mm Faceplate Ø 350 mm (up to Ø 560 for thin workpieces) Radius turning function Turret on support: size 3, Parat 4-station, manually indexable 4 × 90° Chip conveyor Bürener Maschinenfabrik Particularly suitable for: see production spectrum Bodpfxox Ahx De Adrjli

Condition: excellent (used), Maximum machinable diameter above the bed: 575 mm Maximum machinable diameter above the slide: 525 mm Maximum machinable diameter above the small cross slide: 300 mm Distance between centers: 2000 mm Spindle passage diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bjdpfx Adswlgdyersli Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum upper slide travel: 140 mm Maximum tailstock travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: Bljdjtvf Htopfx Adroi - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Year of construction: 2006, condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Bjdpfx Adjwftcvoroli