Pressbrake

MENGELE 280t C280-35L

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Technical data: Pjdpetpnplefx Aalepl - max. working width 2520 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 024.0468, Offer 22569 Technical data: - max. working width 2040 mm - max. material thickness 2 mm - bending angle approx. 0 - 135 ° - motorized stroke upper beam - max. stroke upper beam 85 mm - max. adjustment bending beam 80 mm Podpfop Atvmex Aalepl - manual bending process is supported by eccentric weight - connection 400 V - space requirement approx. W 3700 x H 1250 x D 450 mm - weight approx. 1700 kg

Year of construction: 2015, condition: used, Dimensions (L/W/H) 700x655x1400 mm Filter capacity / m² Ppodpfx Aaegr Rkxelsl Number of filters 1 St. Number of dust containers 1 St. Weight 140 kg

Year of construction: 2020, condition: new, Designed for plug in complete system on a mobile stainless steel base plate incl. juice pump, with 63KW Wolf Oil boiler, 2 heatexchanger, heat-holding section for approx. 20-30 second and automatic control. Components: Heating circuit, heating pump and expansion tank, 2 heatexchanger for juice preheating / recooling and heation uo to 80°C. 24 m heat-holding section, automatic pneumatic temperature control. Capacity 3000 l juice per hour (depending on juice temperature). Ppsdpfjcx R Ddsx Aaljl

Year of construction: 2025, condition: new, functionality: fully functional, stainless steel construction for 2 Euro-Palettes with a loadinghight of 1500mm Ppedpfx Ajclq Ixsaljl max 80 crates with 400 x300 x300mm L x B x H dimensions: widht: 2450mm height 2678mm lenght: 2050mm chamber dimensions widht: 2066 mm height: 1795 mm lenght: 1340 mm Thickness of Insulation 40mm Electronic Regulation of Pasteurizationprocess: Adjustment of heatingspeed (depends also on capacity of the steamboiler) Adjustment of pasteurizationtemperature Adjustment of required holdingtime on Pasteurizationtemperature Adjustment of switch-off temperature electronic Datalogger for Pasteurizationtemperature and Chambertemperature Aircirculation by High effective Stainless Steel Airblower Steaminjection in the Airchannel for opimized steammixing pneumatically actuated Steamvalve Kondensateoutlet on the bottom of the Chamber DN 100 4 pcs. adjustable Feets Steamconsumption: approx.:. 80 kg / H at 1 bar electric power consumption: 5,5kW weight: approx. 650 kg

Condition: excellent (used), Year of construction: 2024, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2MAM022829, cooling capacity: 1,000 kW (1,359.62 HP), Cooling Capacity: 959 kW Type of Input Current: 3 Phase / 50 Hz / 400 V Type of Cooling: Air-cooled Overall Weight: 7,973 kg (Operating) / 7,597 kg (Rigging) Ambient Temperature (max.): 35°C Ambient Temperature (min.): 12.8°C (based on part load performance) Compressor Type: Screw, semi-hermetic, VSD controlled Ppodpjimz Uaofx Aalol Total Power Consumption: 309.9 kW Noise Level: 74 dB(A) 10 m Refrigerant Type: R134a, total charge: 242 kg Water Flow Rate: 146.7 m³/h (40.76 L/s) Pressure Drop (Evaporator): 52.2 – 64.1 kPa COP (Full Load): 3.09 IPLV (Part Load): 5.12 Number of Fans: 14 units (7+7), with low sound kit Nameplate Available: Year of Manufacture: 2018

Condition: used, Year of construction: 2016, Overview  This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition and shows only minor wear. The system is still installed and connected and can therefore be viewed in person at any time. Technical details Output: 60 bags/minute Doypack/flat bag formats: 20/25g, 50g, 300g, 500g, 750g Possibility of micro-dosing powders Modern wide zipper/belt Scope of delivery  Doypack packaging machine | Volpak | SI-280 F1 Multi-head weigher | Ishida | CCW-RV-228-S/05-SS 4 raw material unloading stations Lindor mixer Cox & Plant feeder between the unloading stations and the mixer and multihead weigher Ishida X-ray unit with recoil, IX-GA-4075 Ishida dynamic check weigher with DACS-G-S0 recoil Installation for the injection of nitrogen or another inert gas, together with a measuring system Dust extraction system Euro slot Smooth welding system Ppodstz H T Depfx Aalel

Condition: excellent (used), Year of construction: 2008, The condition of the machine is excellent, it has performed only 14078 operations. CNC controlled machine, designed for processing welded frames. Multiple use of the same time He works in a welding and cleaning line Podpfx Aem Ak R Ujaljpl It does not take up additional space in the hall It can work in the line of frames, sashes or mixed All operations are performed during cooling: dehydration vents, grooves venting, holes in colored profiles drilling the frame for the post connector drilling holes for the hinge in door frames (x6) drilling holes for the hinge in the leaf (x2) The center has its own transport of frames from the welder to the cleaner PLC control, NC User-friendly visualization

Year of construction: 1991, condition: good (used), machine/vehicle number: 07282, Offer 22336 Technical data: - max. working width 3030 mm - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rolls - roll diameter top / bottom 205 / 185 mm - working speed m/min - drive - brake motor 400 V / 7,5 kW - space requirement approx. W 5500 x D 1400 x H 1300 mm - weight approx. 4,7 t - with - bending - Rear roller inclinable, Pedemdqlljpfx Aaljpl - hinged bearing for swinging out the top roller - extended roller ends for mounting of profile rollers - right + left rotation - separate control panel

Condition: new, Year of construction: 2024, A vineyard post roll forming machine is used for vineyards and orchards to produce the stakes and posts. Normally, grape posts are 1.5-2mm thickness. The production line consists of Decoiler, Servo Feeder Straightener, Press, Stamping Tool, Roll Form Machine and Shear. Ppedpfx Ajt Tcz Uealel