Used bandsaw

MEBA 320 DG

Condition: good (used), Mitre Band Saw MEBA DG 320 - Cutting capacity: 325 mm - Rectangular material: 500x300 mm Lhodpoycwcasfx Ahved - Mitre 45° – Round: 300 mm - Mitre 45° – Rectangular material: 300x300 mm - Mitre range – infinitely adjustable: 30–135° - Hydraulic material clamping - Hydraulically adjustable sawing pressure - Infinitely variable band saw speed - Saw blade dimensions: 4200x34x1.1 mm - Coolant system - Automatic shut-off - Emergency stop - Documentation Dimensions: LxWxH 1.8x1.6x1.6 meters / Weight 1500 kg Subject to errors and omissions.

Condition: good (used), Year of construction: 2000, 1 used 4-roll sheet metal bending machine Brand: Stöting Type: VB 322 Serial number: 1591 Year of manufacture: 2000 With Acon control system Working length: 1000 mm Maximum sheet thickness: 12 mm Bending capacity: 8 mm Top roll diameter: 250 mm Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions: L: 3200 mm W: 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Lodov Ibkbspfx Ahvehd Weight: 3.2 tons

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic saw operation with workpiece clamping – sawing – lifting to preset height after completing the cut. Infinitely adjustable hydraulic cutting pressure and feed rate monitoring at the saw band tension. This allows optimal settings for every sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Especially suited for universal use with various cross-sections, materials, and frequently changing mitre cuts. The machine control system complies with CE standard 89/289. Technical data: Cutting capacity in mm round/flat 90° 325 / 500 x 300 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid lowering of the saw frame to the material edge by push button Manual mitre adjustment from 45°–90° – 30°, continuously adjustable with scale The mitre swivel point is the intersection between the saw blade and the fixed vice jaw, meaning there is no change in length measurement when changing the angle Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At any saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Centralised machine operation Saw band drive with end stop Moveable band guide arm, adjustable to material width Saw blade return pulleys with carbide guides Integrated chip cleaning brush Saw band tension with torque wrench Finish: Silver-grey / Blue-grey (RAL 7001 / RAL 7031) Remnant piece length: 60 mm Cutting speed: AC frequency-controlled drive from 15–150 m/min, infinitely adjustable at the control panel Drive: Saw band 3.0 kW; 400 V, 50 Hz Hydraulics 1.1 kW Coolant pump 0.1 kW Saw frame feed: Infinitely variable up to 300 mm/min, hydraulically controlled Lhsdpfx Ahet D Azcsved Saw band tension: Mechanical with torque wrench Saw band dimensions: 4200 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 850 kg Dimensions (LxWxH): 1450 x 2350 x 1350 mm

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Ljdpfx Ahjuwrv Dovohd

Condition: used, Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional semi-automatic miter band saw. 0° 330 mm 320 mm 450 x 320 mm + 45° 320 mm 300 mm 300 x 300 mm + 60° 210 mm 200 mm 200 x 200 mm - 45° 320 mm 300 mm 300 x 300 mm - 60° 210 mm 200 mm 200 x 200 mm Lhodpjwigavsfx Ahved Max. vise opening 455 mm Blade size 4500 x 34 x 1.1 mm Saw blade motor power 4.0 kW - three-phase Blade speed 15 - 100 m/min Accessories: 4.5 m roller conveyor, various saw blades

Condition: used, Year of construction: 2005, Technical Data: Cutting capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest residual piece length: 35 mm Total connected load: 2.0 kW Saw motor, frequency-controlled: 1.5 kW Infinitely variable cutting speed (frequency-controlled): 20 - 110 m/min Saw band dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, upper part fully raised: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Features: - Infinitely variable cutting speed - Saw band guides made of carbide, replaceable - Hydraulic saw feed - Mechanical saw band tensioning - Machine light - Saw band cleaning via freely rotating, easily replaceable wire brush Lhedpfxsx Irx Ie Ahved - Coolant supply via 1 coolant nozzle and 1 coolant hose, coolant tank capacity approx. 45 l, pump capacity 16 l/min - Minimum quantity lubrication - Infeed roller conveyor (1000 mm) and outfeed roller conveyor (2000 mm) with scale and length stop

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Ledpfx Ajv S E Edohvjhd

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Lhsdpsul Svljfx Ahved Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Shaft diameter [mm]: 85 - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lhodpfx Ahjxuf Slsved Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Lhsdpfxeh I Nw De Ahved Approximate installation and training period - 15 days