DMG PH150-8

DMG MORI PH150-8

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Nwedjxgnz Topfx Ah Hob Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: GS1000/5-T, rotational speed (max.): 30,000 rpm, overall weight: 15,500 kg, Year of manufacture: 2014 Condition: very good Magazine: 66 x HSK63 Control: Heidenhain 530 Spindle: n=30,000 Erowa zero-point clamping system integrated into the table Erowa Robot Easy 250 automation with 6 pallets 3D probing system Nedpfx Ahew Awmto Hjwb Oil-air lubrication of high-frequency spindle Laser measurement Spindle hours:

Condition: refurbished (used), Year of construction: 2014, load capacity: 180 kg, arm reach: 2,900 mm, We at Binici MB GmbH also have other industrial robots in-house. All our robots are fully functional (with complete accessories). Nwjdpfx Ahjwxxzwe Heb We are at your disposal for good advice

Year of construction: 1995, condition: used, machine/vehicle number: LWT , Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 20,000 liter storage tank for the storage of water and wastewater as follows . This is a 30 cbm storage tank made of steel. Material S235JRG2 steel . Incl manufacturer certificate DIN and nameplate. The tank is cleaned from the inside and bitumen insulated from the outside. Suitable for underground as well as above ground storage. Tank dimensions : Length : approx. 6.400 mm Diameter : approx. 2.000 mm Weight : approx. 4.000 kg Shape : cylindrical Equipment : on request For the use as extinguishing water tank additionally a suction line with A-fixed coupling according to DIN can be offered. Of course, you can also co-design your tank system! All our plants are extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. and are available for sale on our premises. Could we convince you of our offer? If you have any questions or requests, just call, one of our experienced staff will be happy to advise you. General: All offers are valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank installations and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. Nodpfx Ahsc Nkyvj Hewb With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 470 mm, travel distance Z-axis: 876 mm, spindle motor power: 30,000 W, spindle speed (max.): 1,250 rpm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, turning diameter: 1,000 mm, total length: 2,375 mm, total height: 3,659 mm, total width: 4,558 mm, type of input current: three-phase, torque: 3,655 Nm, input voltage: 400 V, overall weight: 14,000 kg, Equipment: cooling unit, CNC Vertical lathe MAZAK Mega Turn 900 TECHNICAL CHARACTERISTICS: CNC control: MAZATROL SmoothG Max. turning diameter: 920 [mm] Max. cutting diameter: 1000 [mm] Stroke X axis: 470 [mm] Stroke Z axis: 876 [mm] Rapid traverse rate X axis: 24000 [mm/min] Rapid traverse rate Y axis: 24000 [mm/min] Spindle nose: A2-15 Max. spindle speed: 1250 [rpm] Spindle power: 30 [kW] Spindle torque: 3655 [Nm] Min. distance from spindle face to turret face: 154 [mm] Max. workpiece weight: 3000 [Kg] Max. distance from spindle face to turret face: 1030 [mm] Number of tool stations: 12 Turret indexing time: 0.4 [s/pos] Lubrication tank capacity: 516 [l] Total power required: 58.9 [kVA] Supply voltage: 400 [V] Dimensions: 2375 × 4558 × 3659 [mm] Weight: 14000 [Kg] More information available upon request. Nwjdpfsw T Tmpox Ah Hob

Condition: ready for operation (used), controller model: Haas, empty load weight: 12,000 kg, total length: 5,950 mm, total width: 3,048 mm, total height: 2,200 mm, swing diameter over cross slide: 2,000 mm, Grote doorlaat toolroom draaibank Draaibank met dubbele klauwplaat Spanenafvoerband Nwodpfxswu Ipio Ah Hsb CNC Hollow Spindle Slant Bed Oil Country Lathe Swing over bed: 1350 mm Swing over cross-slide: 400 mm Dia of spindle bore: 270 mm!! Power on the spindle: 55 HP Number of speeds: 1 > 500 rpm

Condition: excellent (used), Year of construction: 2020, Two machines of the same type with automation (linked) HAAS control system Travel paths X/Y/Z: 711 / 406 / 394 mm Spindle speed 12,000 rpm Tool magazine for 20 tools, BT 30 4th axis HRT 210 with counter bearing Spiral conveyor Schusta automation with YASKAWA robot Nwedpfev Iypcox Ah Hob

Condition: used, Article: clamping head Manufacturer: Different For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or Nwodpfxsn H Nzue Ah Hsb *

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Nwedpfxevr Eh Ej Ah Hsb Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 650 mm, total length: 6,500 mm, table length: 2,000 mm, table width: 1,000 mm, total width: 3,600 mm, spindle speed (max.): 12,000 rpm, total height: 4,000 mm, overall weight: 14,000 kg, Equipment: rotational speed infinitely variable, Milling machine retrofitted in 2024 CNC TNC 530 HEIDENHAIN Distance between columns 1250 mm Nedpfx Ajul Txzjh Howb HSK 63 ELECTROMANDRINO spindle 12.000 rpm INTEGRAL fairing