Horizontal machining center

MATSUURA H plus 300

Condition: used, _____ Description: Year of manuf. : 2013 Control : Fanuc 30iM Speed : 15000 rpm Movement X/Y/Z : 500/560/500 mm Tool holder : BT40 Spindle: Speed:15.000 rpm Power:15 kW Torque:119 Nm Taper:BT40 NC-Roundtable: B-Axis:0,001° Palletsize:300 x 300 mm Tableloading (max.):250 kg Workpiecesize (max.):ø530 x 760 mm In general: Toolmagazine:71 stations Crsdpfx Abswwy Nasuoh Rapidtravers in X/Y/Z:60 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure, 70 bar Workpiecemeasurement:Touchprobe, Renishaw OMP60 Toolbreakagecontrol:Mechanical Automation:Palletchanger, 2 stations Further Accessory:Trafo, rinsing pistol

Condition: excellent (used), Year of construction: 2005, CNC HORIZONTAL MACHINING CENTER MATSUURA H-PLUS 300 PC 5 YEAR OF MANUFACTURE: 2005 CONTROL: FANUC 30i Technical Specifications: Work Area: Travel lengthwise (X-axis) 500 mm Travel crosswise (Y-axis) 500 mm Credpfx Aowt Ag Hebujh Travel vertical (Z-axis) 500 mm Pallet size 300 x 300 mm Max. workpiece weight 250 kg Rotary table 360 x 0.001° Min./max. distance spindle – table center 120/620 mm Min./max. distance spindle – table surface 80/580 mm Max. workpiece size Ø 500 x 500 mm Spindle speeds 50 – 15,000 rpm Spindle taper ISO 40 Feed rates X/Y/Z 1 – 50,000 mm/min Rapid traverse 50 m/min Rapid traverse B-axis 33.3 rpm Spindle drive power 15/7.5 kW Total power requirement 38 kVA Weight 10 t.

Condition: good (used), Year of construction: 2013, operating hours: 17,904 h, functionality: fully functional, machine/vehicle number: 19261, travel distance X-axis: 500 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 71, Geometry protocol available TECHNICAL DETAILS Control: Fanuc 30iM X travel: 500 mm Y travel: 560 mm Z travel: 500 mm Spindle-to-table distance: 80 - 640 mm Spindle Speed: 15,000 rpm Power: 15 kW Torque: 119 Nm at 1,200 rpm Tool holder: BT40 Spindle bearing inner diameter: 70 mm Spindle speed command: 5-digit direct S command Spindle alignment: electric Tool clamping force: 11.8 kN NC rotary table B-axis: 0.001° Pallet size: 300 x 300 mm Table load (max.): 250 kg Workpiece size (max.): Ø530 x 760 mm Pallet clamping surface: (M12 x P1.75) x 32 Feed rate Rapid traverse speed (X/Y/Z): 60,000 mm/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Jog feed rate (X/Y/Z): 0 – 4,000 mm/min Min. travel increment (X/Y/Z): 0.001 mm Min. travel increment B-axis: 1 degree Tool magazine Number of tool positions: 71 stations Max. tool diameter (with adjacent tools): 90 mm Max. tool diameter (without adjacent tools): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool selection: Fixed address system Tool change arm: W-gripper type Tool-to-tool change time: Dependent on tool weight Tool change time: Chip-to-chip Target value dependent Tool station spacing: 95.25 mm Automatic pallet changer (PC2) Number of pallets: 2 Change method: Rotary table Pallet change time (pallet-to-pallet): 6.5 s Total pallet change time: 7.0 s Pallet clamping force: 41.5 kN Max. pallet weight: 40 kg MACHINE DETAILS Machine height: 2,683 mm Footprint (not including maintenance area): 2,145 x 3,655 mm Machine weight: 8,300 kg Power supply: 50 kVA Crsdpfx Abswm D Irsujh On-time: 51,149 h Program run: 30,722 h Machining time: 17,904 h Workpiece counter: 1,389 pieces EQUIPMENT - Chip management with Chip conveyor - Coolant system with paper belt filter and 70 bar high-pressure internal cooling (ICS) - Workpiece measurement with Renishaw OMP60 touch probe - Tactile tool breakage monitoring - 2-station pallet changer - Transformer - Flushing gun