Matec 30 L

Matec 30 L

Condition: good (used), Year of construction: 2012, functionality: fully functional, Matec 30 L, Blodpfxjzarh Se Aqroh Year of manufacture 2012, Heidenhain iTNC 530 control, X/Y/Z travel 1300/600/700 mm, Spindle speed up to 12,000 rpm, HSK 63-A spindle mount, Electric handwheel, 20 bar internal coolant supply, Paper belt filter, 80-way water coolant supply, Fully enclosed work area, Direct measuring systems, Chip conveyor, Bellows with steel blades, 3D measuring probe, Laser measuring device

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm Blodpfeyb Sx Tsx Aqrsh spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10387 Manufacturer: MATEC Type: 30 L / 6000 Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 6000 mm Y-Travel: 800 mm Z-Travel: 600 mm Spindle Taper: SK 50 Table Load: 3000 kg Max. Workpiece Weight: 800 kg Spindle Speed: 20 - 9000 RPM Max. Torque: 165 Nm Main Drive: 60 kW Weight Of The Machine Ca.: 24 t Bjdpfxey Edz Ns Aqrslh

Condition: good (used), Year of construction: 2010, functionality: fully functional, Matec 30 L, year of manufacture 2010, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-position tool magazine, full enclosure of work area, direct measuring systems, chip conveyor, bellows with steel lamellae, 3D measuring probe, laser measuring device. Bodoy Ev N Eopfx Aqrjlh

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" Blodpfx Aswlhvwoqroh *

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 800 kg, controller model: HEIDENHAIN iTNC 530, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle mount: SK 50 Spindle speed: 20 – 9,000 rpm Torque: max. 165 Nm Table load capacity: 3,000 kg Workpiece weight: max. 800 kg MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Blodpfxeyvudvo Aqrjh Main drive: 60 kW Machine weight: approx. 24 t

Condition: ready for operation (used), Year of construction: 2000, Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible. Bledeywln Ijpfx Aqrjh

Condition: excellent (used), Year of construction: 2016, operating hours: 8,737 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Matec 30HV 3000x800x800 mm NC swing head +/- 105° swiveling Heidenhain TNC640 Handwheel Motor spindle 15,000 rpm / 30 kW / 198 Nm Bjdpfx Ajyaa Sfsqrjlh Tool holder HSK 63A 48 tool pockets ICS (internal coolant supply) 40 bar Belt filter system 450 liters Air through spindle Oil mist extraction (left and right) Partition wall for pendulum operation Side loading door Prepared for additional NC axis 3D triggering probe Renishaw RMP60 Tool breakage control (laser) Clamping hydraulics 100 bar / 10 l/min 2 x clamping circuits, clamping, releasing, manual and via M-function Robot interface The machine has very low operating hours and has always been perfectly maintained. The complete (maintenance) history is known to us. Tools and vices can be taken over if required.

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V Bsdpfxez N Ams Aqrelh sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication Bsdpfjxg Dhcex Aqrslh - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors