Universal machining center

Matec 30HV

Condition: ready for operation (used), Year of construction: 1997, operating hours: 36,111 h, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: LE 430 CA, overall weight: 16,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis Matec 30 HV CNC was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV CNC vertical machining centre we have for sale. Contact us for further details. • Axes travel and speeds • X-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Y-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Z-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Spindle • Drive power (100% duty cycle): 10 kW from 2000 rpm; torque 48 Nm up to 2000 rpm; approx. 6 Nm at 15,000 rpm (M = P*9550/n) • Drive power (25% duty cycle): 15 kW from 2000 rpm; torque 72 Nm up to 2000 rpm; approx. 10 Nm at 15,000 rpm (M = P*9550/n) • Coolant: Internal coolant 20 bar Bdedpfx Aasyzq A So Djb • Head: Swivel head with 1° indexing increments • Tooling • Tool changer: 36 positions • Max. tool diameter: 130 mm • Work area and clamping • Max. workpiece length for double-sided end machining: X = 3500 mm − 2 × max. tool length • Clamping surface: X = 4500 mm (clamping plate length) • Y = 650 mm (clamping plate length); 7 T-slots, 125 mm spacing • Electrical connection: Total connected load 42 kVA

Condition: used, Year of construction: 2005, turning diameter 290 mm turning length 300 mm control Heidenhain Bdodpfx Ajyb S Ihea Dob greates pass round over bed 380 mm total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.000 mm surface area 1.035 x 3.500 mm control Heidenhain 530i round table Ø500 mm / 360° mm/° NC swivel head +/-90 ° spindle tunring speed 9.000 U/min tool taper SK 40 Bedpfxoxx A Nco Aa Djdb number of tool places 48 Pos. auto power on hours ca. 27.834 h spindle hours ca. 12.357 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel head - Rotary table - Wireless probe - Direct linear encoder - Internal coolant supply 40 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors Bedoxg Dhcspfx Aa Djdb

Condition: ready for operation (used), Year of construction: 2020, operating hours: 11,574 h, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, total height: 3,235 mm, overall weight: 13,500 kg, product length (max.): 5,000 mm, This 3-axis DOOSAN MYNX 7500 II was manufactured in 2020, featuring a Heidenhain TNC 620 control with a TS 460 probe. It has a table size of 1600 mm by 750 mm and a maximum spindle speed of 12,000 rpm. With dimensions of 5000 × 4050 × 3235 mm and a weight of 13,500 kg, consider the opportunity to buy this DOOSAN MYNX 7500 II vertical machining centre. Contact us for more information. • Table Length: 1600 mm • Table Width: 750 mm • Spindle Taper: ISO 40 dual contact Bdodpfx Aox U Dtwsa Deb • Maximum Spindle Speed: 12000 rpm Dimensions Machine Depth 4050 mm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Bdedpfx Aajxg D Ats Dob Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements

Condition: ready for operation (used), Year of construction: 2012, operating hours: 50,106 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, spindle motor power: 16,000 W, number of axes: 5, This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details. • Travel Z: 800 mm (horizontal) Bdsdeyrqvlopfx Aa Djb • Travel Z: 700 mm (vertical) • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) • Voltage: 400 V • Installed power: 55 kW • Central lubrication system • Machine status: fully functional • Operating hours: 50,106 h • Control: Rexroth IndraMotion MTX Additional equipment • NC rotary table Ø800 mm (horizontal), maximum table load approx. 2500 kg • Internal coolant supply through spindle (20 bar) • Paper band filter coolant system with approx. 450 l tank • Electronic handwheel • 3D measuring probe (Renishaw) • Work area lightingPlease note: the vice and zero-point clamping system shown are not included in the scope of delivery. Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, total height: 1,840 mm, overall weight: 5,100 kg, controller manufacturer: MAZATROL, number of axes: 3, This 3-axis Mazak Quick Turn NEXUS 200MS was manufactured in 2005. It features a maximum turning diameter of 380 mm, main spindle speed up to 5000 rpm, and a sub-spindle speed of 6000 rpm. The machine includes a Mazatrol 640T Nexus CNC control and has a robust design with dimensions of 2765x1780x1840 mm, weighing 5100 kg. If you are looking to get high-quality turning capabilities consider the Mazak Quick Turn NEXUS 200MS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Maximum turning diameter: 380 mm • Maximum bar diameter (main spindle): 65 mm • Maximum bar diameter (sub-spindle): 42 mm • Distance between spindles: 580 mm Extra Information Machine has only worked in small batch 1-shift production. Dimensions Bdjdpfxsx D Rmts Aa Deb Machine Depth 2765 mm

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, swivel angle B-axis (max.): 105 °, swivel angle C-axis (max.): 360 °, This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°, supporting complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of 500 RPM, it enables precise turning and milling operations. For more information about this mill-turn centre, please reach out to us. Additional equipment • Turning Package: Enables high-precision turning operations in combination with standard milling, facilitating turning and milling in a single setup. Machine Benefits Qualitative Machine Benefits • 5-axis cnc machining center with traveling column, rotary table, and swivel head Technical Machine Benefits Bodpfx Aajx D Dy Hj Dsdb • Full 5-axis capabilities for complex part geometries • A manual 3-jaw chuck rota s plus 800 from schunk is installed on the rotary table. • There is no hardware runtime counter on the machine. Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, number of axes: 5, This 3-axis Matec 30 HV was manufactured in 2013. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine includes a maximum clamping weight of 1200 kg and a maximum spindle speed of 8,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV vertical machining centre we have for sale. Contact us for further details. • Z travel H: 800 mm • Z travel V: 700 mm • Interference circle diameter: 950 mm • Max. clamping weight: 1200 kg Bdjdpfxeymm Exo Aa Deb • Tool positions: 48

Condition: used, Year of construction: 1984, x-travel 2500 mm y-travel 750 mm z-travel 1000 mm table surface area 2550 x 800 mm spindle taper SK 50 control HEIDENHAIN, TNC 150 B Bdodpfxstqqnwe Aa Dsb weight of the machine ca. 16 t

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine was manufactured in 2007 but was retrofitted in 2016 Technical Machine Benefits • Hard disk: 26 gb • Integrated network card • Max. Torque: 100 nm (40% ed) • Temperature-controlled liquid cooling • Work area: fully encapsulated with roof, bellows (steel slats) • Installation: height-adjustable set-up elements • Matec hv 30 was overhauled in 2016 by manufacturer matec maschinenbau Bdedpfxex D Ix To Aa Dsb Extra Information Cooling & Accessories Coolant: High-pressure Coolant Supply (20 bar, optional 40 bar) Paper Belt Filter (30 µm fineness) Tank Volume: 450 l Chip Conveyor: Integrated Scraper Conveyor Oil Mist Extraction: Electrostatic Filter (1000 m³/h) Measuring & Safety Technology Direct Measuring System: Linear encoder in all axes 3D Measuring Probe: Radio transmission to the control system Tool Monitoring: Laser-supported Tool Breakage Monitoring Tool Length Measurement (software) Optional Spindle (HSK 63-A): Higher Power: 30 kW / 190 Nm Drilling Capacity (steel): up to 60 mm Milling Capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Condition: reconditioned (used), Year of construction: 2007, operating hours: 21,990 h, functionality: fully functional, machine/vehicle number: 0903, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, rotational speed infinitely variable, Travel: 3000 x 800 x 1100 mm (X-Y-Z) Heidenhain iTNC530 control Bodpfxjyqx N Ds Aa Djdb Handwheel 48 tools in the chain Motor spindle: 12,000 rpm / 30 kW / 198 Nm Tool holder HSK63 Direct measuring systems on all axes ICS 20 bar with band filter system, capacity 450 liters Mounted NC rotary table for H/V, diameter 500 mm 3D measuring probe Renishaw Tool setting probe Renishaw New motor spindle, new X-axis ball screw, geometry aligned, completely serviced.

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Table diameter 1200 mm Inclination 0-120° Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Bedpfedvn E Usx Aa Djdb Horizontal disc mass 1200mm up to 1900mm

Condition: good (used), Year of construction: 2009, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,300 mm, Equipment: chip conveyor, Good conditions, millturn function with spindle head. Bedpfx Asyl S Ntoa Dodb